• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.2
• /
• pp.87-97
• /
• 2010

A fault tolerant satellite attitude control scheme with a modified iterative learning law is proposed for dealing with actuator faults. The actuator fault is modeled to reflect the degradation of actuation effectiveness, and the solar array-induced disturbance is considered as an external disturbance. To estimate the magnitudes of the actuator fault and the external disturbance, a modified iterative learning law using only the information associated with the state error is applied. Stability analysis is performed to obtain the gain matrices of the modified iterative learning law using the Lyapunov theorem. The proposed fault tolerant control scheme is applied to the rest-to-rest maneuver of a large satellite system, and numerical simulations are performed to verify the performance of the proposed scheme.

• Structural Engineering and Mechanics
• /
• v.77 no.6
• /
• pp.797-807
• /
• 2021

A new simple solution for critical buckling of FG sandwich plates under axial and biaxial loads is presented using new modified power-law formulations. Both even and uneven distributions of porosity are taken into account in this study. Material properties of the sandwich plate faces are assumed to be graded in the thickness direction according to a modified power-law distribution in terms of the volume fractions of the constituents. Equilibrium and stability equations of FG sandwich plate with various boundary conditions are derived using the higher-order shear deformation plate theory. The results reveal that the distribution shape of the porosity, the gradient index, loading type and functionally graded layers thickness have significant influence on the buckling response of functionally graded sandwich plates.

• Journal of Families and Better Life
• /
• v.20 no.4
• /
• pp.89-102
• /
• 2002

Genetically modified foods may be defined as the foods deemed as safe by current technology among the many kinds of agricultural and stockbreeding products that are now under research and development using contemporary gene-modification techniques. This study examines hotly debated arguments, both for and against genetically modified- foods, in various countries. This study also investigates consumers'rights and responsibilities. Countries that are developing and exporting genetically modified organisms(GMO) have maintained that GMO can help produce more crops while reducing labor and other production-related costs, and that the genetically modified foods signify ″the second green revolution,″ which will solve future food and environmental problems by strengthening specific nutritive substances and extending shelf-life. But consumer groups, environmental organizations. and food-importing countries are more cautious about importing and consuming those foods because the potential dangers of GMO to human bodies and the environment have not been tested thoroughly yet. South Korea, following suit with others such as EU, Japan, Australia, and New Zealand, introduced a law on 'Labeling of Genetically Modified Foods', which went in effect in March, 2001, on the basis of customers'rights to make informed choices. The law takes the ″precautionary principle″ into consideration, rather than stopping at insuring ″substantial equivalence″ in developing and consuming GM foods. The actual impact of the law will depend on the level of citizens'Participation more than on the government's willingness to carry out the law. So far the level of Korean consumers'consciousness about genetically modified foods is very low. Therefore, it is hard to expect consumers to exercise their ″rights not to buy″ foods that are potentially unsafe. The Korean government must devise an effective plan to inform and educate the people about the labeling of genetically modified foods.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.597-602
• /
• 1988

In this paper, we consider conventional and modified proportional navigation guidance(PNG) laws for a random maneuvering target. By means of Lyapunov function approach, we show that an ideal missile guided by the conventional PNG law can always intercept a random maneuvering target if some specified initial conditions are satisfied and the navigation constant is chosen sufficiently high. In addition, we propose a modified PNG law. At the final phase of pursuit, the proposed guidance law has a better acceleration profile than the conventional PNG law.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.3
• /
• pp.227-236
• /
• 1994

Steady flows of Newtonian and non-Newtonian fluids in the stenotic tubes with various stenotic shapes are numerically simulated. Validity of the modified power-law model as a constitutive equation for the purely viscous non-Newtonian fluid is discussed and the results of the power-law model are compared with those of the Carreau model, the Powell-Eyring model and experimental data for blood. Flow characteristics and reattachment lengths for non-Newtonian fluids in the stenotic tubes are presented extensively. Also, the analysis is extended to predict the influences of diameter ratio, stenosis spacing, number of stenosis and Reynolds number on the flow characteristics in the multiple stenotic tubes.

• Journal of Power System Engineering
• /
• v.13 no.2
• /
• pp.30-35
• /
• 2009

Numerical Calculations for dimensionless pressure drop (friction factor times Reynolds number) have been obtained for fully developed laminar flow of MPL(Modified Power Law) fluid in isosceles triangle pipes. The solutions are valid for Pseudoplastic fluids over a wide range from Newtonian behavior at low shear rates through transition region to power law behavior at higher shear rates. The analysis identified a dimensionless shear rate parameter which for a given set of operating conditions specifies where in the shear rate range a particular system is operating, i.e., Newtonian, transition or power law region. The numerical calculation data of the dimensionless pressure drop for the Newtonian and power law regions are compared with previously published asymptotic results presenting within 0.16 % in Newtonian region and 2.98 % in power law region.

• Journal of computational fluids engineering
• /
• v.15 no.4
• /
• pp.1-8
• /
• 2010

This article describes the numerical investigation of turbulent blood flow in the stenosed artery bifurcation under periodic acceleration of the human body. Numerical analyses for turbulent blood flow were performed with different magnitude of periodic accelerations using a modified turbulence model which was considering drag reduction of non-Newtonian fluid. The blood was considered to be a non-Newtonian fluid which was based on the power-law viscosity. In order to validate the modified $k-{\varepsilon}$ model, numerical simulations were compared with the standard $k-{\varepsilon}$ model and the Malin's low Reynolds number turbulence model for power-law fluid. As results, the modified $k-{\varepsilon}$ model represents intermediate characteristics between laminar and standard $k-{\varepsilon}$ model, and the modified $k-{\varepsilon}$ model showed good agreements with Malin's verified power law model. Moreover, the computing time and computer resource of the modified $k-{\varepsilon}$ model were reduced about one third than low Reynolds number model including Malin's model.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.2
• /
• pp.23-32
• /
• 2010

In this paper, we proposed the modified method of Metcalfe's law that is "Modfied law" in evaluating the network power for the measurement of combat effectiveness in C4I system. It is applied to JFOS-K (Joint Fire Operating System-Korea) C4I system that can connect KJCCS (Korea Joint Command and Control System) of Korea armed forces with JADOCS (Joint Automated Deep Operations Coordination System) of U.S. armed forces and achieve sensor to shooter system in real time in JCS (Joint Chiefs of Staff) level. The result of combat effectiveness using Modified law is compared to the one by C2 theory and found that both is similar. This study is meaningful because we improved the description level of reality in calculation of combat effectiveness in C4I system.

• Tunnel and Underground Space
• /
• v.13 no.5
• /
• pp.389-396
• /
• 2003

It is shown that the cubic law can be modified regarding the steady-state Navier-Stokes equations by using perturbation approximation method for a sinusoidal aperture variation. In order to adopt the perturbation theory, the sinusoidal function needs to be non-dimensionalized for the amplitude and wavelength. Then, the steady-state Navier-Stokes equations can be solved by expanding the non-dimensionalized stream function with respect to the small value of the parameter (the ratio of the mean aperture to the wavelength), together with the continuity equation. From the approximate solution of the Navier-Stokes equations, the basic cubic law is successfully modified for the steady-state condition and a sinusoidal aperture variation. A finite difference method is adopted to calculate the pressure within a fracture model, and the results of numerical experiments show the accuracy and applicability of the modified cubic law. As a result, it is noted that the modified cubic law, suggested in this study, will be used for the analysis of fluid flow through aperture geometry of sinusoidal distributions.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.49-57
• /
• 2003

Although there are several experimental techniques to evaluate the seismic behavior and performance of civil structures, small-scale models in mast of physical tests, instead of prototypes or large-scale models, would be used due to a limitation on capacities of testing equipments. However, the inelastic seismic response prediction of small-scale models has some discrepancies inherently because the similitude law is generally derived in the elastic range. Thus, a special attention is required to regard the seismic behavior of small-scale models as one of prototypes. In this paper, differences between prototypes and small-scale models pseudodynamically tested on steel column specimens are investigated and an alternative to minimize them is suggested. In general, small-scale models could have the distorted stiffness induced from some experimental errors on test setup, steel fabrication and so on. Therefore, a modified similitude law considering both a scale factor for length and a stiffness ratio of small-scale model to prototype is proposed. Using the modified similitude law to compensate experimental errors, the pseudodynamic test results from modified small-scale model are much improved as compared with the results of prototype. According to the pseudodynamic test results of small-scale steel models, it can be concluded that the modified similitude law proposed could be effective in simulating the seismic response of prototype structures.