• 제어로봇시스템학회논문지
• /
• 제3권5호
• /
• pp.461-468
• /
• 1997

A real-time collision-free trajectory control method for dual arm robot system is proposed. The proposed method is composed of two stages; one is to calculate the minimum distance between two robot arms and the other is to control the trajectories of the robots to ensure collision-free motions. The calculation of minimum distance between two robots is, also, composed of two steps. To reduce the calculation time, we, first, apply a simple modeling technique to the robots arms and determine the interested part of the robot arms. Next, we apply more precise modeling techniques for the part to calculate the minimum distance. Simulation results show that the whole algorithm runs within 0.05 second using Pentium 100MHz PC.

• Fibers and Polymers
• /
• 제6권4호
• /
• pp.348-354
• /
• 2005

These days consumers' various demands are accelerating research on apparel manufacturing system including automatic measurement, pattern generation, and clothing simulation. Accordingly, methods of reconstructing human body from point-clouds measured using a three dimensional scanning device are required for apparel CAD system to support these functions. In particular, we present in this study a human body reconstruction method focused on two issues, which are the decision of the number of control point for each sectional curve with error bound and the local knot removal for reducing the unusual concentration of control points. The approximation of sectional curves with error bounds as an approximation criterion leads all sectional curves to their own particular shapes apart from the number of control points. In addition, the application of the local knot removal to construction of human body sectional curves reduces the unusual concentration of control points effectively. The results may be used to produce an apparel CAD system as an automatic pattern generation system and a clothing simulation system through the low level control of NUBS or NURBS.

• 드라이브 ㆍ 컨트롤
• /
• 제12권4호
• /
• pp.41-47
• /
• 2015

Hydraulic manipulators have been widely used in many different fields due to their high force/torque to inertia ratio. The increased speed of hydraulic manipulators requires solutions to problems ranging from mechanical design to the need to determine a robot model suitable for model-based control. As a solution, this paper presents the integration of SolidWorks with Simscape for designing and controlling hydraulic manipulators. The integration provides a platform for the rapid control prototyping of a hydraulic robot without the need to build actual prototypes. The mechanical drawings of a manipulator are first created using Solidworks and are then imported into Simscape, where the manipulator is represented by connected block diagrams based on the principle of physical modeling. Simulation examples for a 3D manipulator made by KNR SYSTEM INC are verified to show the effectiveness of the presented platform.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.275-278
• /
• 1998

The mathematical interpretation of a practical sampler which is useful to obtain the small signal models for the peak and average current mode controls is proposed. Due to the difficulties in applying the Shannon's sampling theorem to the analysis of sampling effects embedded in the current mode control, several different approaches have been reported. However, these approaches require the information of the inductor current in a discrete expression, which restricts the application of the reported method only to the peak current mode control. In this paper, the mathematical expressions of sampling effects on a current loop which can directly apply the Shannon's sampling theorem are newly proposed, and applied to the modeling of the peak current mode control. By the newly derived models of a practical sampler, the models in a discrete time domain and a continuous time domain are obtained. It is expected that the derived models are useful for the control loop design of power supplies. The effectiveness of the derived models are verified through the simulation and experimental results.

• 대한원격탐사학회지
• /
• 제19권4호
• /
• pp.285-290
• /
• 2003

본 논문에서는 외부표정요소(EOP)를 지상기준점을 이용하여 계산하는 기존의 방식과는 달리, 위성의 궤도자료와 영상촬영기하를 이용하여 EOP를 계산하고 지상기준점을 이용하여 모델오차를 보정하는 방식의 카메라모델링 기법을 제시하고 있다 제시한 기법은 영상보조파일로부터 궤도자료, 센서의 촬영각도 및 영상중심 촬영시간 등을 추출하여 위성의 영상획득당시의 실제 기하를 최대한 충실히 재구성하여 모델링을 수행하며 외부표정요소를 일차 또는 이차의 다항식으로 근사하지 않는다. 이와 같이 수립된 카메라모델을 통해 기존의 방법에 비해 적은 한 두개 정도의 지상기준점으로 영상화소 수준의 RMSE를 얻을 수 있었으며 모델오차 보정을 위한 지상기준점이 영상라인방향으로 고루 분포하지 않아도 된다. 이러한 장점은 대형프로젝트에서의 지상기준점 취득을 위한 비용을 획기적으로 절감할 수 있을 뿐 아니라 비접근 지역에 대한 위치정보 획득에 대한 가능성을 제시하고 있다.

• Computers and Concrete
• /
• 제1권3호
• /
• pp.355-369
• /
• 2004

This paper presents a study of four finite element techniques that can be used to model slabon-beam highway bridges. The feasibility and correctness of each modeling technique are examined by applying them to a prestressed concrete I-beam bridge and a prestressed concrete box-beam bridge. Other issues related to bridge modeling such as torsional constant, support conditions, and quality control check are studied in detail and discussed in the paper. It is found that, under truck loading, the bending stress distribution in a beam section depends on the modeling technique being utilized. It is observed that the behavior of the bridge superstructure can be better represented when accounting for composite behavior between the supporting beams and slab.

• 한국시뮬레이션학회논문지
• /
• 제25권4호
• /
• pp.21-30
• /
• 2016

최근 자동 생산 시스템은 PLC (Programmable Logic Controller) 제어 프로그램을 일반적으로 사용하고 있다. 생산제품의 수명 주기가 길지 않기 때문에 공법과 라인 및 설비 변경이 자주 일어난다. 대부분, 기존 공정을 바탕으로 이루어지고 설비의 위치 및 제어정보를 수정한다. PLC 제어 프로그램 또한 기존 공정을 바탕으로 수정이 이루어진다. 새로운 제어 프로그램을 검증하기 위해서는 실제 생산 시스템을 구축하기 전에 가상의 공간에서 실제 공정과 같이 구성하여 순차적으로 공정이 진행되는 지 확인할 수 있는 방법이 필요하다. 본 연구는 순차제어(sequential control)와 병목현상 처리에 유용한 Timed-FSA를 기반으로 하는 논리적인 모델링 방법을 사용한다. 기존에 연구되었던 I-O 모델링과 I-O 모델링에서 요구되었던 하나의 설비에 다양한 상태의 정의를 통해 사용자의 시간과 공수를 절감하기 위한 기존 모델링에 페트리네트의 토큰(Petri Nets Coloured Token) 개념을 추가한 확장된 I-O 모델링 방법을 제안한다. 예제 설비를 통하여 사용자의 모델링 시간을 절감하는 실험과 사용자 평가를 통해 제안하는 확장된 I-O 모델링의 편의성을 검증한다.

• 제어로봇시스템학회논문지
• /
• 제16권11호
• /
• pp.1074-1081
• /
• 2010

Today, the research related to the robot is achieved in various part. With the high interest in means of transport, various researches about autonomous mobile robot and next generation transport is continuing. The unicycle robot among these needs much control technique like balance control model and driving model. For autonomous driving of this unicycle robot, from the basic balance control to direction switching control and velocity control are needed. But the environment elements like a gradient and frictional force or unbalanced elements from the structural feature. The unicycle needs the real time balance control so more complex, harder to control. And when functional addition is made, the problem that fall entire reaction velocity or accuracy would be happen. This paper introduces entire dynamics modeling of the unicycle robot and reduced model. And propose the new balance control algorithm using fuzzy controller. Also the evaluation about performance would be made through the test.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.291-294
• /
• 2001

This paper presents the circuit modeling and control methods of PWM DC/DC converter with isolated dual outputs. The dual output converter consists of a transformer with a single secondary winding and two switches. The proposed control algorithm is that required inductor current according to the loads is feed-forwarded to the PI current controller. The proposed control method has better response characteristics than conventional PI control method at load change.

• 인터넷정보학회논문지
• /
• 제4권2호
• /
• pp.39-45
• /
• 2003

네트워크에서 QoS를 지원하기 위한 적응제어 구조를 개발하기 위해서는 대역폭 할당에 따른 전송율 응답특성을 모델링하는 것이 필수적이다. 본 연구에서는 네트워크의 대역폭 할당에 따른 전송율의 동적 특성을 구현하는 "동적 시스템 모델"을 제안하고 적응 피드백 제어 구조를 제안된 모델에 적용시켜 시뮬레이션 및 모델의 최적화를 수행하였다.적화를 수행하였다.