• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.322-324
• /
• 2003

Leaf C:N ratio is a new factor in the field of biochemical inversion with hyperspectral data. Effects of common-used spectral transformations including log(R), log(1/R), 1/R, etc. from 400nm to 2490nm on its inversion are compared. Results show that their effects on statistical modeling are not apparent. Continuum removal is used on original reflectance in the range of 2030nm to 2220nm, in which exists an apparent absorption peak due to cellulose, lignin, protein, etc. The effect is distinctive and tends to improve the precision of C:N ratio inversion. Further, it is a robust and physically based transformation.

• Interaction and multiscale mechanics
• /
• 제5권2호
• /
• pp.157-168
• /
• 2012

The dilatancy of granular materials has significant influence on its mechanical behaviors. The dilation angle is taken as a constant in conventional associated or non-associated flow rules based on Drucker-Prager yields theory. However, various experimental results show the dilatancy changes during progressive failure of granular materials. A non-associated flow rule with evolution of dilation angle is adopted in this study, and Cosserat continuum theory is used to describe the behaviors of granular materials for considering to some extent the its internal structure. Numerical examples focus on the bearing capacity and localization of granular materials, and results illustrate the capability and performance of the presented model in modeling the effect on failure behavior of granular materials.

• 터널과지하공간
• /
• 제29권5호
• /
• pp.318-331
• /
• 2019

본 연구에서는 3차원 불연속균열망을 이용하여 불연속 암반을 모사하여 스미어드 균열 모델을 적용한 불연속 암반의 등가연속체 해석기법에 대해 연구를 실시했다. 연속체 해석 코드인 FLAC3D를 이용하여 모델링을 수행하였고, 해당 적용 모델의 신뢰성을 검증하기 위해 불연속체 해석에 널리 사용되는 3DEC 코드를 통해 모델의 메쉬 사이즈, 불연속면의 밀도 및 불연속면의 간극에 대한 민감도 분석을 함께 실시하여 제안 모델의 신뢰성을 검증할 수 있었다. 본 논문에서 제안된 등가연속체 해석기법을 이용한 불연속 암반의 수리해석에 대한 연구결과는 교통 터널, 석유비축기지, 방사성폐기물 처분장 등의 지하 구조물 설계 및 건설 분야에 기초자료로 활용될 것이라고 판단된다.

• 한국지반공학회논문집
• /
• 제36권12호
• /
• pp.125-132
• /
• 2020

암반내의 절리는 암반의 전체적인 역학적 거동에 중요한 역할을 한다. 암반에 대한 수치해석은 절리면의 역학적 물성, 방향성, 간격 그리고 연속성을 정교하게 모델링할수 있어야 한다. 본 논문의 내재적 절리-연속체 접근법은 절리군을 포함한 암반의 역학적 모델을 제시한다. 암반에 대한 강성 텐서는 온전한 암석과 절리군의 역학적 특성으로부터 산정하였다. 이는 온전한 암석과 절리군에 대한 연속적 강성 시스템의 컴플라이언스 텐서 합으로부터 산정할 수 있다. 암반사면의 평면파괴에 대한 수치해석은 기존의 daylight envelope과 측면한계를 적용하는 경험적인 방법과 상당히 일치함을 확인하였다. 개발된 내재적 절리-연속체 모델은 연속체 기반으로 수식화되어 기존의 절리에 대한 열-수리-화학적 실험적 결과들을 실제 수치해석에 적용할수 있을 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.591-604
• /
• 2009

This paper presents some important issues in modeling rock behaviour around an underground opening at depth which characterized as stress-induced fractural failure of rock. Unlike other conventional modeling approaches, stress-induced rock failure is highly complex process due to its own heterogeneous and discrete natures. Because of this complexity, many researchers has been struggled to mimic such processes as close as possible to reality with various approaches in both analytical, and numerical approaches for past few decades. Such approaches which are based on continuum mechanics, analytical fracture mechanics, and DEM(Discrete Element Method) were explored in this paper, and fundamental shortcomings for each approaches were illustrated here. In addition, DEM approach using $PFC^{2D}$(Particle Flow Code) was also implemented and illuminated in this paper and discuss the improvement and considerations for the future research.

• Advances in Computational Design
• /
• 제8권2호
• /
• pp.97-112
• /
• 2023

The Finite Element (FE) modeling of Reinforced Concrete (RC) under seismic loading has a sensitive impact in terms of getting good contribution compared to experimental results. Several idealized model types for simulating the nonlinear response have been developed based on the plasticity distribution alone the model. The Continuum Models are the most used category of modeling, to understand the seismic behavior of structural elements in terms of their components, cracking patterns, hysteretic response, and failure mechanisms. However, the material modeling, contact and nonlinear analysis strategy are highly complex due to the joint operation of concrete and steel. This paper presents a numerical simulation of a chosen RC column under monotonic and cyclic loading using the FE Abaqus, to assessthe hysteretic response and failure mechanisms in the RC columns, where the perfect bonding option is used for the contact between concrete and steel. While results of the numerical study under cyclic loading compared to experimental tests might be unsuccessful due to the lack of bond-slip modeling. The monotonic loading shows a good estimation of the envelope response and deformation components. In addition, this work further demonstrates the advantage and efficiency of the damage distributions since the obtained damage distributions fit the expected results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.633-636
• /
• 2006

Impact damage modeling of concrete under high strain rate loading conditions is investigated. A phenomenological penetration model that can account for complicated impact and penetration process such as the rate and loading history response of concrete, the microstructure-penetration interaction etc. is discussed. Constitutive law compatible with Second Law of thermodynamics and coupled damage and plasticity modelling based on continuum damage mechanics are also examined. The purpose of this paper is preliminarily to study with respect to impact and penetration models for concrete before the development of that model.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.269-271
• /
• 2003

A simplified analysis method is proposed in this paper, through which the deformation due to spot welding is obtained. In order to analyze the spot welding process, the finite elements are axisymmetrically modeled, and the results from them are used for analyzing the deformation of spot welded structure. It takes more little time in this simplified analysis than the analysis by 3-D continuum elements, and this analysis produces the results that nearly agree with the measured data.

• Multiscale and Multiphysics Mechanics
• /
• 제1권2호
• /
• pp.171-188
• /
• 2016

Gradient enhanced theories of crystal plasticity enjoy great research interest. The focus of this work is on thermodynamically consistent modeling of grain size dependent hardening effects. In this contribution, we develop a model framework for damage coupled to gradient enhanced crystal thermoplasticity. The damage initiation is directly linked to the accumulated plastic slip. The theoretical setting is that of finite strains. Numerical results on single-crystalline metal showing the development of damage conclude the paper.

• 소성∙가공
• /
• 제13권7호
• /
• pp.600-607
• /
• 2004

This paper addresses a viscoplastic constitutive model that allows a consistent way of modeling positive and negative rate sensitivities of flow stress concerned with dynamic strain aging. Based on the concept of continuum mechanics, a phenomenological constitutive model includes the use of a yield surface within the framework of unified viscoplasticity theory. To model negative rate sensitivity, rate-dependent back stress is introduced and flow stress in fully developed inelastic deformation regime is thus decomposed into the plastic contribution of rate independency and the viscous one of rate dependency.