• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1854-1868
• /
• 2018

A wireless body-sensor network (WBSN) refers to a network-configured environment in which sensors are placed on both the inside and outside of the human body. The sensors are much smaller and the energy is more constrained when compared to traditional wireless sensor network (WSN) environments. The critical nature of the energy-constraint issue in WBSN environments has led to numerous studies on the reduction of energy consumption of WBSN sensors. The transmission-power-control (TPC) technique adjusts the transmission-power level (TPL) of sensors in the WBSN and reduces the energy consumption that occurs during communications. To elaborate, when transmission sensors and reception sensors are placed in various parts of the human body, the transmission sensors regularly send sensor data to the reception sensors. As the reception sensors receive data from the transmission sensors, real-time measurements of the received signal-strength indication (RSSI), which is the value that indicates the channel status, are taken to determine the TPL that suits the current-channel status. This TPL information is then sent back to the transmission sensors. The transmission sensors adjust their current TPL based on the TPL that they receive from the reception sensors. The initial TPC algorithm made linear or binary adjustments using only the information of the current-channel status. However, because various data in the WBSN environment can be utilized to create a more efficient TPC algorithm, many different types of TPC algorithms that combine human movements or fuse TPC with other algorithms have emerged. This paper defines and discusses the design and development process of an efficient TPC algorithm for WBSNs. We will describe the WBSN characteristics, model, and closed-loop mechanism, followed by an examination of recent TPC studies.

• Journal of Oral Medicine and Pain
• /
• v.41 no.3
• /
• pp.85-90
• /
• 2016

Purpose: The aim of this study was to develop an automated software to extract tooth and pulpal area from sectional cone-beam computed tomography (CBCT) images, which can guarantee more reproducible, objective and time-saving way to measure pulp/tooth volume ratio. Methods: The software program was developed using MATLAB (MathWorks). To determine the optimal threshold for the region of interest (ROI) extraction, user interface to adjust the threshold for extraction algorithm was added. Default threshold was determined after several trials to make the outline of extracted ROI fitting to the tooth and pulpal outlines. To test the effect of starting point location selected initially in the pulpal area on the final result, pulp/tooth volume ratio was calculated 5 times with different 5 starting points. Results: Navigation interface is composed of image loading, zoom-in, zoom-out, and move tool. ROI extraction process can be shown by check in the option box. Default threshold is adjusted for the extracted tooth area to cover whole tooth including dentin, cementum, and enamel. Of course, the result can be corrected, if necessary, by the examiner as well as by changing the threshold of density of hard tissue. Extracted tooth and pulp area are reconstructed three-dimensional (3D) and pulp/tooth volume ratio is calculated by voxel counting on reconstructed model. The difference between the pulp/tooth volume ratio results from the 5 different extraction starting points was not significant. Conclusions: In further studies based on a large-scale sample, the most proper threshold to present the most significant relationship between age and pulp/tooth volume ratio and the tooth correlated with age the most will be explored. If the software can be improved to use whole CBCT data set rather than just sectional images and to detect pulp canal in the original 3D images generated by CBCT software itself, it will be more promising in practical uses.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.281-287
• /
• 2005

Nonlinear behaviors such as steep-fronted wave motions and a finite amplitude limit cycle often accompanying combustion instabilities have been numerically investigated using a characteristic-based approximate Riemann solver and the well-known ${\eta}-{\tau}$ model. A resonant pipe initially subjected to a harmonic pressure disturbance described the natural steepening process that leads to a shocked N-wave. For a linearly unstable regime, pressure oscillations reach a limit cycle which is independent of the characteristics of the initial disturbances and depends only on combustion parameters and operating conditions. For the 1.5 MW gas generator under development in KARI, the numerical results show good agreement with experimental data from hot-firing tests.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.4
• /
• pp.639-647
• /
• 2009

From development of computer science, genetic algorithm has been applied to many fields for search like non-linear problem based on various variables and optimization process. Among others, in the data mining field, there are methods to select the best input variables for model accuracy and various predict models which were merged by using the genetic algorithm. In the meantime, to improve and preserve quality of the Hanwoo (Korean cattle) which is represented the agricultural industry in our country, we need to find out outstanding economical traits of Hanwoo in having specific genotype of single nucleotide polymorphism (SNP) which is inherited to next generation. According to, This research proposed the selecting method to find genotype of SNPs marker which affects economical traits of the Hanwoo by using the genetic algorithm. And we selected the best genotypes of the principal SNPs marker by applying to real data on Hanwoo genetic.

• Journal of the Korea Concrete Institute
• /
• v.22 no.4
• /
• pp.511-517
• /
• 2010

The purpose of this study is to investigate the shear behavior of prestressed concrete deep beams and to provide the data for development of improved design criteria. The accuracy and objectivity of the assessment process may be enhanced by the use of sophisticated nonlinear finite element analysis program. Hence, in this study, the computer program, named RCAHEST (reinforced concrete analysis in higher evaluation system technology), was used. Material nonlinearity is taken into account by comprising tensile, compressive and shear models of cracked concrete and a model of reinforcing steel. A bonded or unbonded tendon element based on the finite element method, that can represent the interaction between tendon and concrete of prestressed concrete member, is used. The proposed numerical method for the shear behavior of prestressed concrete deep beams is verified by comparing the analytical results with test data by others.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.57-67
• /
• 2008

At present engineers use the highway design speed concept to develop the horizontal alignment. This concept has a strength of attaining consistent horizontal alignments because of its use of a single speed value. Yet it shows a critical weakness that when opened the operating speed for the vehicles on the road can be a lot different than the design speed. To resolve this, many countries already develop the horizontal alignment by adopting procedures that weigh vehicle operating speeds, and this research joins them by developing an operating speed based horizontal alignment design. We have collected vehicle speed samples over the nation, selected some speed influential design elements by doing a statistical analysis, provided a set of models for two-lane roads and four lane roads, and showed a stepwise feedback procedure by doing a case study. It is underscored that in the case study the proposed procedure has scaled down the speed inconsistency problem, and we are of opinion that our procedure would coin both investment efficiency and speed consistency in future highway projects.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.4
• /
• pp.259-268
• /
• 2000

Senescence is a sequence of biochemical and physiological events that lead to death of a cell, organ, or whole organism. Senescence is now clearly regarded as a genetically determined and evolutionarilly acquired developmental process comprising the final stage of development. However, in spite of the biological and practical importance, genetic mechanism of senescence has been very limited. Through forward and reverse genetic approaches, we are trying to reveal the molecular and genetic mechanism of senescence in plants, employing leaf organs of Arabidopsis as a model system. Using forward genetic approach, we have initially isolated several delayed senescence mutants either from T-DNA insertional lines or chemical-mutagenized lines. In the case of ore 4 and ore 9 mutants, the mutated genes were identified. The recent progress on characterization of mutants and identification of the mutated genes will be reported. We are also screening mutations from other various sources of mutant pools, such as activation tagging lines and promoter trap lines. Two dominant senescence-delayed mutants were isolated from the activation tagging pool. Cloning of the genes responsible for this phenotype is in progress. For reverse genetic approach, the genes that induced during leaf senescence were first isolated by differential screening method. We are currently using PCR-based suppression subtractive hybridization, designed to enrich a cDNA library for rare differentially expressed transcripts. Using this method, we have identified over 35 new sequences that are upregulated at leaf senescence stage. We are investigating the function of these novel genes by systemically generating antisense lines.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.3
• /
• pp.11-19
• /
• 2010

In recent years, Korea has witnessed an increase to natural disasters such as landslides due to localized sudden and intensive rainfalls. Thus there have been researches on surface displacements to detect and monitor displacements in the areas prone to landslides by using high-precision and density numerical elevation data from LiDAR, which is an advanced 3D measuring equipment. However, the commercial software to process large-capacity LiDAR data, is expensive and difficult to be applied to specialized tasks such as analysis of landslide. In addition, there are no measures for many users to easily access diverse spatial information related to landslides and put it to intuitive uses. Thus this study developed an application program to analyze landslides by processing time series LiDAR data and intuitively serve many users with information about the topography and landslides of given areas. It analyzed the current state of landslides in the subject region through case study and proposed that 3D-based landslide and topography information can be served intuitively.

• The Journal of Society for e-Business Studies
• /
• v.9 no.1
• /
• pp.285-301
• /
• 2004

Public service provision through internet is one of major parts for e-government implementation. It is essential to link the internal administrative network with internet to provide the services through internet and to support kiosks through internet, which should result in critical issues for security. A relay server, as a front server for the public service processing system and a web server, a control server for kiosks, are placed between the public service processing system and kiosks to solve those security issues. It is the way to solve security issues through protecting direct communication between the public service processing system and a web server and authenticating a relay server and a web server through authentication process. In the implementation of the system this paper provide a design for an architecture model of the public service processing system through internet, which are aiming to develop high level of the quality system effectively, to reduce the risk of initial stage of development, and to reduce the incurring cost due to reworks.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.1 s.120
• /
• pp.59-68
• /
• 2007

This article statistically analyzed contributive levels of district image based on an effect and a similarity index through the evaluation of citizens and suggested the efficient management system of a city image according to the results. For this study, Busan City was selected as a case city by the preceding literature and was investigated concerning district image and city image through a questionnaire. The new evaluation method for analysis of a city image was presented in this process. The results of this research are as follows: 1. Busan City has a substantial positive and culturally unique image, and each of its districts have other image characteristics. for example, the CBD district has a positive image, and the sea shore district has a busy and prosperous image, but the backward sea shore district has an image of stagnancy. 2. The image of Yeonje-gu has the largest effect on the image of Busan. Next in influence are Jung-gu, Saha-gu, Suyoung-gu, respectively. The effect index is closely connected with the variance of evaluative adjectives. 3. Busanjin-gu and Haeundae-gu have similar images to Busan City. Next in similarity are Nam-gu, Jung-gu, Youngdo-gu, Suyoung-gu, respectively. The similarity index is closely connected with the correlation of evaluative adjectives. Busan City and its districts can establish their image strategies with the above analyzed results. This study is meaningful in that a statistical evaluative method was proposed. With continued follow-up research, this study may serve as a systematic and logical model to improve the urban landscape and image.