• Journal of Periodontal and Implant Science
• /
• v.34 no.1
• /
• pp.35-48
• /
• 2004

Since the occlusal loading is transmitted to the surrounding bone, the success of an implant treatment is closely related to the distribution of the stress on the implant. The finite element analysis method is often used in order to produce a model for dispersion of stress. Assessment of the success of the implant is usually based on the degree of osseointegration which is a bone and implant surface interface. Implant used in this research was designed through the method of shape optimization after the stress on implant was anaylzed by the finite element analysis method. This study was pertinently assessed by a clinical, histologic, histomorphometric analysis after the shape optimized implant was installed on beagle dog tibia. The results are as follows 1. It clinically showed a good result without mobility and imflammatory reaction. 2. Implant was supported by dense bone and bone remodeling showed on the surrounding area of the implant 3. The average percentage of bone-implant contact was 58.1%.The percentage of bone density was 57.6%. Having above results, shape optimized implant showed the pertinence through clinical and histologic aspects. However, to use the shape optimized implant, the further experiment is required for finding problems, improvement.

• The Korean Journal of Emergency Medical Services
• /
• v.6 no.1
• /
• pp.27-37
• /
• 2002

The health and medical service attracts more public attention as the economy of Korea is rapidly growing up and the standard of living is elevated. Especially, the interest and demand on the prehospital emergency medical service that consists of the important part of primary medical service that is directly related to the life of patients are gradually increased. However, as compared with other advanced countries such as America in this area, Korea actually fell behind in the utilization of IT (Information Technology) to maximize the efficiency of emergency service system as well as has a problem in the general service system. This study suggested the necessity to introduce EMD (Emergency Medical Dispatch) system that takes a great role as the core part in the prehospital emergency medical service that is not systemized in Korea yet. In addition, this study proposed the implementation model of EMD ASP system using ASP (Application Service Provider) in EMD system to flexibly deal with the change of IT and efficient implementation and integration of information system as well as to significantly reduce cost through wire/wireless high speed Internet network that is politically promoted in Korea on the basis of EMD. The system analysis and design was executed by HIPO (Hierarchy Plus Input Process Output) analysis that was the conceptual design technology for EMD information system modeling based on ASP and DFD (Data Flow Diagram). This study proposed DB table configuration and data schema to implement the application of web browser interface in EMD system through ERD(ER-Diagram) of EMD ASP system. Finally, this study described how to implement and utilize EMD information system. This study aims to facilitate the qualitative development of emergency medical service in the future as suggesting the concrete models for the implementation of high value-added prehospital emergency medical information system as applying ASP concept to EMD system of prehospital emergency medical service area.

• Structural Monitoring and Maintenance
• /
• v.4 no.1
• /
• pp.17-31
• /
• 2017

Since extensometers are used to determine the absolute deformation of foundation and abutments and all results are obtained in reference to the base rod, the accuracy of these results has been constantly a subject of debate. In this regard, locating and installing extensometers outside the range of effect zone is also another challenge. The main purpose of this paper is to investigate and modify extensometers results based on the mentioned issues. For this aim, the concrete RCC Zhaveh dam in Iran was selected as the case study. To study the results of extensometers installed in this dam, first, the 3DEC_DP 5.00 software was applied for numerical modeling. Parameters such as discontinuities, dead load and piezometric pressure in the interface of concrete and rock were considered. Next, using the results obtained from 6 extensometers in foundation and abutments and 4 clinometers in dam body, the numerical model was calibrated through back analysis method. The results indicate that the base rod is moved and is not recommended being used as the base point. In other words, because installation of base anchor outside the range of effect zone is not possible due to the operational and economic considerations, the obtained results are not accurate enough. The results indicate a considerable 2-3 mm displacement of the base rod (location of the base anchor) in reference to the real zero point location, which must be added to the base rod results.

• Tunnel and Underground Space
• /
• v.25 no.1
• /
• pp.76-85
• /
• 2015

We have developed a software to predict failure time of the rock slope based on analysis of the data from real time displacement measurements with respect to time. The software consists of four modules that play roles in analytical methods such as inverse velocity method, log time-log velocity method, log velocity-log acceleration method and nonlinear least square method to estimate failure time. VisualBasic.NET on the MS Visual Studio platform was utilized as a development tool to efficiently implement the modules and the graphical user interface of the software. Displacement data obtained from laboratory physical model studies of plane sliding were used to explore the applicability of the software, and to evaluate the possibility of predicting potential slope failure. It seems possible to estimate failure time using developed software for sliding plane having exponential type of deformability.

• Journal of Korea Game Society
• /
• v.8 no.3
• /
• pp.15-22
• /
• 2008

Recently, Our average life span of korean people is extended and fast-growing an elderly population caused by Being Improved our living conditions and medical science level. Our another problems which being faced by an aging population are that marked psychological and social changes of the aged. The psychological changes of the aged is related to how they make their living and it strong influences on their successful aging process. For health of the aged, there is an urgent need of recreation which can be social activities to void decline their own process of thinking and the executive ability to adapt for controlling health. Therefore, thepurpose of this recreation Courseware program is to help the alienated minorities to achieve the optimal health and best quality of life based on the knowledge of the social-activities and to understand the korean traditional culture plays. Finally, This study could contribute it as a baseline model for the empirical study and to develop further recreation program for the elderly social activities and sufficient for needs of understanding our traditional culture plays.

• Journal of the Korean Geosynthetics Society
• /
• v.4 no.4
• /
• pp.3-11
• /
• 2005

In this study, a large-scale laboratory model test and 2-D numerical analysis were conducted to verify the reinforcement effect by utilizing geotextile bag on the railway roadbed. Static loading which simulated train load was applied on the geotextile-reinforced railway roadbed and also unreinforced railway roadbed. Computer program named Pentagon 2-D which is a part of FEM programs was used in the numerical analysis. Based on the results of laboratory test and 2-D numerical analysis, the effect of load distribution and settlement reduction was found to be depending on the geotextile characteristics, tensile strength of geotextile, and interface friction angle between geotextile bags. In general, the result of 2-D numerical analysis shows lower value than that of laboratory test.

• The Journal of Information Systems
• /
• v.26 no.3
• /
• pp.295-312
• /
• 2017

Purpose Consumption behaviors of consumers have changed with the widespread use of the Internet and smart phones, and accordingly online marketing activities are becoming ever more prevalent. Yet, the domestic food-service industry has yet to offer an Omni-Channel order system that encompasses a online, offline, and mobile interface. Also, a multilingual menu ordering service for foreign tourists is not yet available. Therefore, if an order service system accessible online and offline which could provide multi-language services were implemented, the satisfaction of the service provider and domestic and foreign customers would be maximized. Design/methodology/approach By designing an electronic menu based on open an OS and providing electronic menus in offline stores, we have completed the design of a linked order system which would be available everywhere (online, offline, and mobile). The CMS was developed to integrate these three mediums and the entire operator was designed to receive basic information and statistical information about the merchants, or store operators. Also, a multilingual term dictionary containing menu information for foreign tourists was made into a database so that foreign tourists who are having difficulty in communication can use it more easily. Findings We have made it possible for customers to use the order service without distinction between online, offline, and mobile platforms, and have proved that it is a more efficient and convenient service for customers as well as operators. Nevertheless, as an initial model, the implemented system has limitations on the execution of the payment support method in the electronic menu board and in the management division of the CMS. In case of commercialization, it is necessary to make an alliance of efforts to attract initial franchises. Through further supplementation, we expect the online and offline connection-types martservice system will maximize the satisfaction of both operators and customers alike.

• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.460-471
• /
• 2009

This study is the research on sensitivity in the web. The main purposes of the study are to present the objective criteria on sensitivity of web users and to help embodiment of successful design. The study has overall two main subjects, which are the contents and results. They are as follows. First, the study is going to develop sensibility factors and the sensitivity structure model. Second, based on the study above, the further stage focuses on the correlation between sensibility and figurative factors in the web design. By understanding of the correlation between sensitivity and figurative factors, the study assist designer in the embodiment of successful sensitivity design. And it shows one of the various approaches to sensitivity. In the end, it can be considered as a process to make an objective criteria on sensitivity design at the same time expected to play a role providing designers with rational guideline on work and evaluation and helping the presentation of successful sensitivity design.

• Journal of Digital Convergence
• /
• v.18 no.2
• /
• pp.301-312
• /
• 2020

This is a user experience study of factors that should be considered in designing home appliances experience service. Untact services are emerging, but the development of home appliances sector is in early stage. Based on the six factors of Stephen P. Anderson's Creating Pleasurable Interface Model, this study conducted surveys, 1:1 in-depth interviews, and participation observations to measure and analyze user experience. In this study, I compared 4060s and 2030s's user experience in that the untact services raise the digital alienation among middle-senior-aged. As a result, there were significant differences between the two, including the opposite satisfaction in terms of reliable, usable and pleasurable factors. I hope that this study will be of strategic help in designing future home appliance experience services.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.933-937
• /
• 2002

The fiber reinforced composite material is widely used in the multi-industrial field where the weight reduction of the infrastructure is demanded because of their high specific modulus and specific strength. Pressure vessels using this composite material in comparison with conventional metal vessels can be applied in the field where lightweight and the high pressure are demanded from the defense and aerospace industry to rocket motor case due to the merits which are energy cutdown the weight reduction and decrease of explosive damage preceding to the sudden explosion which is generated by the pressure leakage condition). In this paper, for nonlinear finite element analysis of E-glass/epoxy filament winding composite pressure vessel receiving an internal pressure, the standard interpretation model is developed by using the ANSYS, general commercial software, which is verified as the accuracy and useful characteristic of the solution based on Auto LISP and ANSYS APDL. Both the preprocessor for doing exclusive analysis of filament winding composite pressure vessel and postprocessor that simplifies result of analysis have been developed to help the design engineers.