• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.675-679
• /
• 1992

In industry, the speed control of single-phase induction motor in domestic use is generally controlled by a simple ON-OFF or PID control method. However, in this case, in order to have a good speed regulating characteristics, itself should be modified in accordance with the optimum PID factors which are varied each time operating speed changes. Shortening the development time and saving the cost which are needed to modify the controller is a major problem to be solved now in industry. In order to alleviate the above difficulties, it is proposed to apply adaptive control technique using MRFAC(Model Reference Following Adaptive Control) for the speed control of single-phase induction motor which has scarcely been studied. In this paper, the above speed control technique is achieved using MCS-96 one chip micro controller with a good speed control characteristics and it is expetted to open a wide application field in the speed control of single-phase induction motor in the future.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.4
• /
• pp.412-418
• /
• 2014

This paper describes the development of variable stability system (VSS) control laws for the KFA-i to simulate the dynamics of KFA-m aircraft. The KFA-i is a single engine, Class IV aircraft and was selected as an in-flight simulator (IFS) aircraft, whereas the KFA-m is a simulated aircraft that is based on the F-16 aircraft. A 6-DoF math model of KFA-i aircraft was developed, linearized, and separated into longitudinal and lateral motion for VSS control law synthesis. The KFA-i aircraft has five primary control surfaces: two flaperons, two all movable horizontal tails, and one rudder. Flaperons are used for load control, the horizontal tails are used for pitch and roll rate control, and the rudder is used for yaw rate control. The developed VSS control law can simulate four parameters of the KFA-m aircraft simultaneously, such as pitch, roll, yaw rates, and load. The simulation results show that KFA-i follows the responses of KFA-m with high accuracy.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.272-275
• /
• 1992

A novel fault diagnosis method based on likelihood decomposition is proposed for linear stochastic systems described by autoregressive (AR) model. Assuming that at some time instant .tau. the fault of one of the following two types is occurs: innovation fault (actuator fault); and observation fault (sensor fault), the log-likelihood function is decomposed into two components based on the observations before and after .tau., respectively, Then, the type of the fault is determined by comparing the log-likelihoods corresponding two types of faults. Numerical examples demonstrate the usefulness of the proposed diagnosis method.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.266-271
• /
• 2005

In this study, following works have been carried out : division of Nakdong River Basin into 25 sub basins, development of a technique to evaluate spatial distribution of rainfall and analysis of rainfall data of 169 stations, selection of control points, and selection of a hydrologic model(SSARR). The runoff analysis showed that the surface-subsurface separation and soil moisture index parameters are the most important two to the simulation result.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.1055-1064
• /
• 1999

In this wort ER(electro-rheological) clutch and MR(magneto-rheological) clutch are devised and their performance characteristics such as response time and controllability are compared. As a first step, field-dependent yield stresses of ER and MR fluids are distilled in shear mode. For reasonable comparison between two clutches, a nondimensional design model is established by choosing same design parameters of gap size and number. Following the manufacturing of two clutches, field-dependent torque level, response time to step input, mechanical Power generation to electric power consumption are experimentally measured and compared. In addition, in order to investigate torque controllability of the clutches a sliding mode controller is formulated and experimentally realized. Control bandwidths of two clutches are identified and tracking control responses for desired torque trajectories are presented.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.1
• /
• pp.78-85
• /
• 2007

A gun is still one of the major weapons of a combat ship. To assess the ship's fire control capability which is influenced by tracking system, fire control algorithm, gun, the ship itself, target behavior, environment and engagement situation, simulation system for gun-oriented engagement for surface ship is needed. This paper proposes the process for designing and implementing a gun-oriented engagement simulation system using DEVS(Discrete Event Simulation Specification), which is a formalism based on the set theory. It consists of the following activities : 1) analyzing the characteristics of a gun-oriented engagement, 2) constructing the deterministic model of the combat ship of study with DEVS, 3) modeling properties of each entity showing as stochastic errors. With this process, the gun-oriented engagement simulation system is developed and applied for the combat system under development.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.206-211
• /
• 1993

This paper presents a new identification method which utilizes fuzzy inference in parameter identification. The proposed system has an additional control loop where a real plant is replaced by a plant model. The control system to be designed is to satisfy the following specifications: 1) It has zero steady-state error. 2) It has adequate damping characteristics. 3) 1),2) satisfied, it has a shortest rise-time. Fuzzy rules describe the relationship between comparison results of the features and magnitude of modification in the model parameter values. This method is effective in auto-tuning because the response of the closed loop is verified. The proposed method is tested in simulation for several plants with high-order lags and dead-times.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.90.5-90
• /
• 2002

In this research, we are trying to develop an automatic sorting system, which is mostly affected by frictional forces between a veneer and plank. So we will make a suitable dynamic model and mechanism to control the velocity feedback. We will suggest stick-slip motion model which can predict the stability behavior of this system. The control system has a feedback loop, in which the following operations are included. A kind of sensor can get the velocity of the mass to adhesive veneer. The output of result signal should be passed to a filter, then to a phase shifter, which applies an adjustable phase-shift, to a variable-gain amplifier. A shaker will be attached to the mass, which ex...

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.2
• /
• pp.166-172
• /
• 2003

The dynamics of the DDWMR depends on the velocity difference of the two driving wheels. And which is known as a type of non-holonomic equation. By this reason, the treatment of DDWMR had become difficult and conservative. In this paper, the differential-driving wheeled mobile robot is considered. The Takaki-Surgeno fuzzy model and a control method for DDWMR is presented. The suggested controller has three control elements. The first element is fuzzy state feedback designed for eliminating the dependence of time-varying parameter. The second element is weighting controller which is designed for good frequency response. The third controller is PI-controller which is designed for good command following and robustness with un-modeled dynamics. In order for achieving the performance objective, the design of controller is based on the loop-shaping algorithm.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2602-2604
• /
• 2000

In this paper, we study robust linear optimal model following servo system in the presence of disturbances and parameter perturbations. A technique to directly design the generalized differential operator based unified control system that covers both differential operator based continuous time and delta operator based discrete time case is presented. The quadratic criterion function for a linear system is used to design the robust unified servo control system. This servo control system is designed by applying a simple genetic algorithm to follow the output of the reference model optimally. The characteristics of the proposed servo system are analysed and simulated to verify the robustness.