• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.5
• /
• pp.609-616
• /
• 2003

The purpose of this study is to design the adaptive speed control system of a marine diesel engine by combining the Model Matching Method and the Nominal Model Tracking Method. The authors proposed already a new method to determine efficiently the PID control Parameters by the Model Matching Method. typically taking a marine diesel engine as a non-oscillatory second-order system. But. actually it is very difficult to find out the exact model of a diesel engine. Therefore, when diesel engine model and actual diesel engine are unmatched as an another approach to promote the speed control characteristics of a marine diesel engine, this paper Proposes a Model Reference Adaptive Speed Control system of a diesel engine, in which PID control system for the model of a diesel engine is adopted as the nominal model and Fuzzy controller and derivative operator are adopted as the adaptive controller.

• Communications for Statistical Applications and Methods
• /
• v.26 no.5
• /
• pp.507-517
• /
• 2019

Statistical matching is a method of combining multiple sources of data that are extracted or surveyed from the same population. It can be used in situation when variables of interest are not jointly observed. It is a low-cost way to expect high-effects in terms of being able to create synthetic data using existing sources. In this paper, we propose the several statistical micro matching methods using a multinomial logistic regression model when all variables of interest are categorical or categorized ones, which is common in sample survey. Under conditional independence assumption (CIA), a mixed statistical matching method, which is useful when auxiliary information is not available, is proposed. We also propose a statistical matching method with auxiliary information that reduces the bias of the conventional matching methods suggested under CIA. Through a simulation study, proposed micro matching methods and conventional ones are compared. Simulation study shows that suggested matching methods outperform the existing ones especially when CIA does not hold.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.3
• /
• pp.293-300
• /
• 2007

The aim of this paper is to design a speed controller of a DC motor by selection of a PID parameters using genetic algorithm. The model of a DC motor is considered as a typical non-oscillatory, second-order system, And this paper compares three kinds of tuning methods of parameter for PID controller. One is the controller design by the genetic algorithm. second is the controller design by the model matching method third is the controller design by Ziegler and Nichols method. It was found that the proposed PID parameters adjustment by the genetic algorithm is better than the Ziegler & Nickels' method. And also found that the results of the method by the genetic algorithm is nearly same as the model matching method which is analytical method. The proposed method could be applied to the higher order system which is not easy to use the model matching method.

• Journal of Applied Reliability
• /
• v.16 no.4
• /
• pp.323-330
• /
• 2016

Purpose: Recently, propensity score matching method is used in a large number of research paper, nonetheless, there is no research using fitness test of before and after propensity score matching. Therefore, comparing fitness of before and after propensity score matching by logistic regression analysis using data from 'online survey of adolescent health' is the main significance of this research. Method: Data that has similar propensity in two groups is extracted by using propensity score matching then implement logistic regression analysis on before and after matching separately. Results: To test fitness of logistic regression analysis model, we use Model summary, -2Log Likelihood and Hosmer-Lomeshow methods. As a result, it is confirmed that the data after matching is more suitable for logistic regression analysis than data before matching. Conclusion: Therefore, better result which has appropriate fitness will be shown by using propensity score matching shows better result which has better fitness.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.460-460
• /
• 2000

Until now various model matching systems have been proposed for linear system, but very little has been done for nonlinear system In this paper, a design method of discrete time flight control system using nonlinear model matching is proposed. This method is based on Hirschorn's algorithm and facilitates easy determination of the control law using the relationship, between the output and the input, which is obtained by the time shift of the output. Also as a result, this method is the extension of the linear model matching control system proposed by Wolovich, in which the control law is obtained by left-multiplying the output by the interactor matrix. At the end of paper, the proposed control system is applied to CCV flight control system of an aircraft and the feasibility of the proposed approach is shown by the numerical simulations.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.10
• /
• pp.427-437
• /
• 1986

Identification of the plants is not easy task especially in the fields of process control. From this point of view, Kitamori developed a method of control system design based on partial knowledge about controlled processes. However, it is difficult to control the oscillatory plant by kitamori's method. In this paper, we develope a method of partial model matching control system design, which have desirable pole-placements in order to improve the above defects. Design examples are given to illustrate the effectiveness of the method.

• The Korean Journal of Applied Statistics
• /
• v.21 no.6
• /
• pp.981-996
• /
• 2008

Statistical matching techniques whose aim is to achieve a complete data file from different sources. Since the statistical matching method proposed by Rubin (1986) assumes the multivariate normality for data, using this method to data which violates the assumption would involve some problems. This research proposed the statistical matching method using robust regression as an alternative to the linear regression. Furthermore, we carried out a simulation study to compare the performance of the robust regression model and the linear regression model for the statistical matching.

• Journal of the Korean Society of Safety
• /
• v.37 no.1
• /
• pp.41-48
• /
• 2022

Bridge engineering documents have essential contents that must be referenced continuously throughout a structure's entire life cycle, but research related to the quality of the contents is still lacking. XML schema matching is an excellent technique to improve the quality of stored data; however, it takes excessive computing time when applied to documents with many contents and a deep hierarchical structure, such as bridge engineering documents. Moreover, it requires a manual parametric study for matching elements' weight factors, maintaining a high matching accuracy. This study proposes an efficient weight-factor determination method based on an artificial neural network (ANN) model using the simplified XML schema-matching method proposed in a previous research to reduce the computing time. The ANN model was generated and verified using 580 data of document properties, weight factors, and matching accuracy. The proposed ANN-based schema-matching method showed superiority in terms of accuracy and efficiency compared with the previous study on XML schema matching for bridge engineering documents.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.436-441
• /
• 2008

One of important factors in designing array-type MEMS resonators is obtaining a desired frequency response function (FRF) within a specific range. In this paper Krylov subspace-based model order reduction using moment-matching with non-zero expansion points is represented to calculate the FRF of array-type resonators. By matching moments at a frequency around a specific range of the array-type resonators, required FRFs can be efficiently calculated with significantly reduced systems regardless of their operating frequencies. In addition, because of the characteristics of moment-matching method, a minimal order of reduced system with a specified accuracy can be determined through an error indicator using successive reduced models, which is very useful to automate the order reduction process and FRF calculation for structural optimization iterations.

• Korean Institute of Interior Design Journal
• /
• no.25
• /
• pp.280-289
• /
• 2000

The purpose of this study is to suggest a evaluation method and matching process model which derives suitable design firm for a client. Unlike the existing evaluation method, the suggested evaluation method and matching process for interior design firm allows a client specify his own needs. The evaluation methods utilizes designers experience record, past performance and customers post occupancy evaluation to derive design firms meeting clients requirements. With this method and matching process model, customers could access the design firms more efficiently and the design firms suitable for the clients needs could be suggested.