• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1218-1224
• /
• 2008

A liquid culture of yeast "Candida tropicalis" was used in a fluidized bioreactor to achieve high removal efficiencies of volatile organic compounds (VOCs). In this study, granular activated carbon (GAC) was used as a fluidized material to improve adsorptive capacity as well as mass transfer of gaseous toluene, the model VOC. The GAC fluidized bioreactor demonstrated toluene removal efficiencies ranging from 50 to 80%, when inlet toluene loading varied in a range between 13.1 and 37.4 g/m$^3$-hr. The maximum elimination capacity determined in the GAC fluidized bioreactor was 172 g/m$^3$-hr at a toluene loading of 291 g/m$^3$-hr. Transient loading experiments revealed that the removal efficiency was remained unchanged during an increased loading period, and toluene introduced to the bioreactor was first absorbed to GAC and then slowly desorbed and became available to the yeast culture. Hence the fluidized GAC helped to achieve an improved mass transfer between the gas and liquid phases, resulting in high toluene removal capacity. Consequently, the GAC fluidized bioreactor using C. tropicalis can be successfully applied for the removal of VOCs, and is a feasible alternative over conventional processes such as packed-bed biofilters.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1255-1261
• /
• 2008

In this study, The effects of three different biological activated carbon (BAC) materials (each coal, coconut and wood based activated carbons), empty bed contact time (EBCT) and water temperature on the removal of haloacetic acid (HAA) 5 species in BAC filters were investigated. Experiments were conducted at three water temperatures (5, 10 and 20$^{\circ}C$) and four EBCTs (5, 10, 15 and 20 min). The results indicated that coal based BAC retained more attached bacterial biomass on the surface of the activated carbon than the other BAC, increasing EBCT or increasing water temperature increased the HAA 5 species removal in BAC columns. To achieve an HAA removal efficiency 50% or higher in a BAC filter, the authors suggest 10 min EBCT or longer for 5$^{\circ}C$ waters and 5 min EBCT for waters at 10$^{\circ}C$ or higher. The kinetic analysis suggested a first-order reaction model for HAA 5 species removal at various water temperatures (5, 10 and 20$^{\circ}C$). The pseudo-first-order reaction rate constants and half-lives were also calculated for HAA removal at 5, 10 and 20$^{\circ}C$. The pseudo-first-order reaction rate constants and half-lives were also calculated for HAA 5 species removal at 5$\sim$ 20$^{\circ}C$. The half-lives of HAA 5 species ranging from 0.75 to 18.58 min could be used to assist water utilities in designing and operating BAC filters for HAA removal.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.345-351
• /
• 2008

Fe-impregnated activated carbon(Fe-AC) was prepared by Fe(III) loading on activated carbon(AC) in various preparation pH. In order to evaluate the stability of Fe-AC, dissolution of iron from Fe-AC in acidic conditions was measured. In addition, batch experiments were conducted to monitor the removal efficiency of copper by Fe-AC. Results of stability test for Fe-AC showed that the amount of extracted iron increased with contact time but decreased with increasing solution pH. The dissolved amount of iron gradually increased at solution pH 2 and finally 13% of the total iron loaded on activated carbon was extracted after 12 hr. However dissolution of iron was negligible over solution pH 3. Removal of Cu(II) by Fe-AC was greatly affected by solution pH and was decreased as solution pH increased as well as initial Cu(II) concentration decreased. Surface complexation modeling was performed by considering inner-sphere complexation reaction and using the diffuse layer model with MINTEQA2 program.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.71-80
• /
• 2006

Collaboration has become essential in the product design process due to internationalized and specialized business environments. This study presents a real-time collaborative 3D design workspace for distributed designers, focusing on the development and the evaluation of new interaction techniques supporting nonverbal communication such as awareness of participants, shared manipulation and tele-presence. Requirements were identified in terms of shared objects, shared workspaces and awareness through literature reviews and an observational study. An Augmented Reality based collaborative design workspace was developed, in which two main interaction techniques, Turn-table and Virtual Shadow, were incorporated to support shared manipulation and tele-presence. Turn-table provides intuitive shared manipulation of 3D models and physical cues for awareness of remote participants. Virtual shadow supports natural and continuous awareness of location, gestures and pointing of partners. A lab-based evaluation was conducted and the results showed that interaction techniques effectively supported awareness of general pointing and facilitated discussion in 3D model reviews. The workspace and the interaction techniques can facilitate more natural communication and increase the efficiency of collaboration on virtual 3D models between distributed participants (designer-designer, engineer, or modeler) in collaborative design environments.

• Reproductive and Developmental Biology
• /
• v.32 no.3
• /
• pp.193-198
• /
• 2008

The current study was designed to extend the technique of spermatogonial transplantation to economically important pig model We evaluated the efficiency of pig to pig transplantation. Donor testis cells were harvested from testes obtained at castration of 10- to 14-day-old boars and were labeled with fluorescent marker(PKH26) before transplantation. The presence of infused dye or labeled pig testicular cells was confirmed in the seminiferous tubules from recipient pig. The most effective procedure of intratubular germ cell transfer was to insert an fine needle ($21{\sim}25$ gauge) through the cauda epididymis and testis into the rete testis under ultrasound guidance. Infusion of $5{\sim}7ml$ of dye solution or cell suspension could fill the rete and up to 50% of seminiferous tubules of 14-week-old boars. Testis were examined for the presence and localization of labeled donor cells immediately after transplantation and labeled donor cells were found in numerous seminiferous tubules from recipient pig testes. These results indicate that germ cell transplantation is feasible in recipient pig testis. This study represents successful spermatogonial transplantation between individual animals in a livestock species.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.246-259
• /
• 2008

This study was to minimize the trial and error in the primary step of the C4I system(ATCIS) of the each army corps on the front line, and test the economy and efficiency was tested by reviewing related papers and the system characteristics of other countries. The relationship was researched by analyzing the collected survey data and survey data related to the user's requirement level such as the army standards, that is, commonality, timeliness, simplification, automaticity, field availability and viability, multi-stage security and interoperability, unification. The result showed that the C4I system was efficiently operated through the system reliability for the specification of the system and operation manual, maneuverability and security, adaptability of the war field and system support and management, and good education and training about system operation, and less system maintenance and supplementary element. As a result, the development plan confirmed that the continuous operator education and the construction of the maintenance, and the upgrade digitalization(C4ISR+D) with the korean characteristics based on IT of network systems, and system development of the measurement model of the operator performance must be continuously supplemented in the near future.

• Archives of Plastic Surgery
• /
• v.32 no.1
• /
• pp.5-11
• /
• 2005

Prostaglandin $E_1$($PGE_1$) is known to have various physiological action such as vasodilatation, decrease of blood pressure, angiogenesis, inhibition of platelet aggregation and so forth. $PGE_1$ has been developed in many different formulations in order to overcome its chemical instability and deactivation in the lungs when administered parenterally. Lipo-AS013 is a potent drug with higher chemical stability and greater vascular wall targeting than others. The study was done on $3{\times}10cm$ model flap of dorsal skin of Sprague-Dawley rats and the flap perfusion survival were observed and documented. The flap treated with Lipo-AS013 beforehand was given intravenously Sodium fluorescein 10 minutes later, and then Percent Dye Fluorescence Index(% DFI) was calculated. The results were compared to a control group and the group administered locally epinephrine.. In the control group, the % DFI and flap survival rate increased from $54.1{\pm}6.7$ to $65.0{\pm}2.6$(p<0.01) while in Lipo-AS013 group from $55.3{\pm}2.2$ to $67.4{\pm}1.9$(p<0.01), respectively. In the epinephrine group, the % DFI(p<0.05) and flap survival rate(p<0.001) decreased. In the both epinephrine and Lipo-AS013 group Percent DFI and flap survival rate are comparable with the control group.The result indicates that the potent Lipo-AS013 enhances the blood flow and flap survival. This highly potent Lipo-AS013 may have targeting ability and accumulate $PGE_1$ onto the vascular walls. A quantitative analysis of fluorescence on the skin surface is a reliable tool to measure the blood perfusion into an ischemic flap and its viability. Further comparative study with conventional $PGE_1$ and Lipo-$PGE_1$ is needed in order to clarify the action and efficiency of Lipo-AS013.

• Health Policy and Management
• /
• v.5 no.1
• /
• pp.80-105
• /
• 1995

Assuming that we introduced integration of medical insurance society for self-employed, this study was conducted to examine effects and results after the integration and to research more effective method for integration. To assess effects and results of the finacial status of 266 insurance societies after intergration, the data were obtained from "The Medical Insurance Program for Self-Employeds Statistical Yearbook in 1992". The major finding are as follows : 1. Three alternative integration proposals were made. First alternative proposal was consisted of 232 medical insurance societies, second was 187, and third was 115. 2. As the results of average number of the insured per insurance societies of medical insurance program for self-employed every alternative proposal, first was 88, 119 persons, second was 108, 576, and third was 178, 967 from 76, 576 persons of present socienties. 3. It was true that the more average size of societies increased, the more average administration expenditure per 1, 000 insured reduced. 4. The average size of societies grew bigger, the rate of general expenditure to general revenue more improved. Also, the rate of benefits to contributions was changed for better. But if not to have had correct analysis and precise preparation for integration, effects and results of integration were always not optiized. 5. According to results of simple regression formulas, it was proved that the more the average size of societies was increased, the more result was advantaged. 6. The law of majority and the economy of scale were applied in this study, and it was necessary to analyze and assess effectiveness and efficiency of integration. Therefore, when the integration of medical insurance societies for self-employeds will be performed, it must be taken into consideration. Among three alternative proposals, third was showed more effective alternative than anothe, second was presented more ineffective result than present system. To achieve more effective and efficient integration of regional medical insurance societies throughout the result of the regression formula on present cost curve, it is necessary to operate well-integrated societies and to know appropriative countermeasures of present situation of each societies. Also, for integrating regional medical insurance societies, it is necessary to continue more deep research through practical model activity and to investigate the effective size and managed method of the societies.societies.

• Journal of Life Science
• /
• v.18 no.6
• /
• pp.852-857
• /
• 2008

The effects of Bulnesia sarmienti water extract on lipid metabolism were investigated in type-1 diabetes rats. The rats were fed a basal diet and B. sarmienti water extract for 8 weeks. The rats were randomly assigned to each treatment group: normal, control, three kinds of treatment group (BWO: 0.45 mg/ml, BW1: 0.9 mg/ml, BW2: 1.8 mg/ml). After 8 weeks of experimental diets consumption, the body weights and food efficiency ratio of B. sarmienti water extract fed groups were not change with those in the control group. The concentration in plasma total-cholesterol, LDL-cholesterol, triglyceride were significantly decrease in the B. sarmienti water extract groups compared with those in the control group. Although it was not possible to observe blood glucose control effects of eight weeks of B. sarmienti water extract feeds in type-1 diabetes model, it was discovered that the feeds are highly effective in lowering the levels of blood lipid substances triglycerides, total-cholesterol, and LDL-cholesterol.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.597-608
• /
• 2009

In this paper, large-deformation elasto-plastic analysis of space frames that considersjoint connection properties is presented. This method is based on the large-deformation formula with finite rotation, which was developed initially for elastic systems, and is extended herein to include the elasto-plastic effect and the member joint connection properties of semi-rigid what?. The analytical method was derived from the Eulerian concept, which takes into consideration the effects of large joint translations and rotations. The localmember force-deformation relationships were obtained from the beam-column approach, and the change caused by the axial strain in the member chord lengths and flexural bowing were taken into account. The effect of the axial force of the member on bending and torsional stiffness, and on the plastic moment capacity, is included in the analysis. The material is assumed to be ideally elasto-plastic, and yielding is considered concentrated at the member ends in the form of plastic hinges. The semi-rigid properties of the member joint connection are considered based on the power or linear model. The arc length method is usedto trace the post-buckling range of the elastic and elasto-plastic problems with the semi-rigid connection. A sample non-linear buckling analysis was carried out with the proposed space frame formulations to demonstrate the potential of the developed method in terms of its accuracy and efficiency.