• Journal of Korea Port Economic Association
• /
• v.25 no.3
• /
• pp.139-164
• /
• 2009

The purpose of this paper is to investigate the value chain efficiency of Korean port investment by using the newly developed multi-year and multi-stage value chain efficiency model of DEA(Data Envelopment Analysis). Inputs[port investment amount, cargo handling capacity, and berthing capacity], and outputs[cargo handling amount, number of ship calls, revenue, and score of customer service satisfaction] are used during 14 years(1994-2007) for 20 Korean seaports by using two kinds of DEA models. Empirical main results are as follows: First, Model 1 shows that the ranking order of multi-stage value chain efficiency is Stage 2, Stage 3-1, Stage 1, and Stage 3-2. And according to the value chain average efficiency scores, ranking order is stages 2, 1, 3-1, and 3-2. In Model 2, 3(Incheon, Mogpo, and Jeju) out of 9 ports show the ranking order of Stages 2, 3-2, 3-1, and 1. And value chain average efficiency scores rank in order of Stages 2, 3-2, 3-1, and 1. Second, the difference among the value chain efficiency scores of each stage comes from the efficiency deterioration of all ports except Stages 2 and 1 in Model 1. In Model 2, value chain efficiency scores among the Stages 3-1, 3-2 compared to Stage 1 were deteriorated. The main policy implication based on the findings of this study is that the manager of port investment and management of Ministry of Land, Transport and Maritime Affairs in Korea should introduce the multi-year, multi-stage value chain efficiency method for deciding the port investment amount and evaluating the effect of port investment after considering the empirical results of this paper carefully.

• Economic and Environmental Geology
• /
• v.45 no.3
• /
• pp.307-315
• /
• 2012

In this paper, a laboratory model test was conducted to evaluate grouting efficiency of ordinary portland cement(OPC) and micro cement used in MIS(Micro-Injection Process System). For this research, a injection equipment was developed for pressure permeation which can evenly simulate various grouting tests in a laboratory and suggested a standard for the production of the test specimen. Using the injection device, the laboratory injection tests of grouts were prepared with water/cement ratio of 1:1, 2:1, 3:1, 4:1, and 5:1. The analysis of injection test for pressure permeation showed that the efficiency of injection increases linearly as the water/cement ratio increases. Comparison of efficiency of the injection indicates that MIS with a relatively smaller average diameter shows more efficient injection than the OPC. In the low ratio of water/cement as 2:1~1:1, the injection efficiency of OPC was especially poor. Also, a nonlinear grout volume-injection time is represented by a hyperbolic model and grout volume predicted by hyperbolic model was compared with the value measured. From the comparison, it shows that the hyperbolic model has the potential of evaluating the efficiency of grouting.

• Environmental and Resource Economics Review
• /
• v.30 no.1
• /
• pp.79-105
• /
• 2021

In the circumstance of standing out the climate change issue, the purpose of this study is to compare the efficiency of offshore and coastal fisheries according to whether or not greenhouse gas (GHG) emissions are considered, and then to present policy alternatives based on the analysis results. For analysis, the traditional data envelopment analysis (DEA), the slacks-based measure (SBM) and the SBM-undesirable models were used, and robust analysis of variance (ANOVA) and Wilcoxon Signed-rank tests were performed. As a result, the study showed that the average efficiency of fisheries decreased as the traditional DEA extended to the SBM model considering the slack and the SBM-undesirable model including the GHG emissions. Specifically, the average efficiency of the traditional DEA model, SBM model, and SBM-undesirable model was analyzed as 0.7350, 0.5820 and 0.4976 respectively. In addition, the results of the robust ANOVA and Wilcoxon Signed-rank tests all showed that there are statistically significant differences in efficiency between offshore and coastal fisheries as well as among traditional DEA, SBM and SBM-undesirable models. As a policy alternative to the analysis, it was suggested that to improve the efficiency of coastal and offshore fisheries, it is necessary to actively implement the new fishing vessel project and develop smart and electric hybrid fishing vessels.

• The Journal of Information Systems
• /
• v.29 no.1
• /
• pp.93-111
• /
• 2020

Purpose The purpose of this paper is to observe the relative priorities of importances among the modified versions of Block chain system, being based on AHP decision support model which should be also proposed in this paper. Design/methodology/approach Four versions modified from the beginning of Block chain were divided into Public& Permissionless, Private&Permissionless, Public&Permissioned and Private&Permissioned types. Five criteria for evaluating the four versions whether the version were suitable for Medical information system were introduced from five factors of Technologies Accept Model, which were Security, Availability, Variety, Reliability and Economical efficiency. We designed Decision support model based on AHP which would select the best alternative version suitable for introducing the Block chain technology into the medical information systems. We established the objective of the AHP model into finding the best choice among the four modified versions. First low layer of the model contains the five factors which consisted of Security, Availability, Variety, Reliability and Economical efficiency. Second low layer of the model contains the four modified versions which consisted Public&Permissionless, Private&Permissionless, Public&Permissioned and Private& Permissioned types. The structural questionnaire based on the AHP decision support model was designed and used to survey experts of medical areas. The collected data by the question investigation was analyzed by AHP analysis technique. Findings The importance priority of Security was highest among five factors of Technologies Accept Mode in the first layer. The importance priority of Private&Permissioned type was highest among four modified versions of Block chain technologies in second low layer. The second importance priority was Private&Permissionless type. The strong point of Private&Permissioned type is to be able to protect personal information and have faster processing speeds. The advantage of Private& Permissionless type is to be also able to protect personal information as well as from forging and altering transaction data. We recognized that it should be necessary to develop new Block chain technologies that would enable to have faster processing speeds as well as from forging and altering transaction data.

• Journal of Biosystems Engineering
• /
• v.38 no.1
• /
• pp.33-40
• /
• 2013

Purpose: The goal of this study was to build an accurate digital factory that evaluates the performance of a factory using computer simulation. To achieve this goal, we evaluated the effect of worker-related variables on production in a simulation model using comparative analysis of two cases. Methods: The overall work process and worker-related variables were determined and used to build a simulation model. Siemens PLM Software's Plant Simulation was used to build a simulation model. Also, two simulation models were built, where the only difference was the use of the worker-related variable, and the total daily production analyzed and compared in terms of the individual process. Additionally, worker efficiency was evaluated based on worker analysis. Results: When the daily production of the two models were compared, a 0.16% error rate was observed for the model where the worker-related variables were applied and error rate was approximately 5.35% for the model where the worker-related variables were not applied. In addition, the production in the individual processes showed lower error rate in the model that included the worker-related variables than the model where the worker-related variables were not used. Also, among the total of 22 workers, only three workers satisfied the IFRS (International Financial Reporting Standards) suggested worker capacity rate (90%). Conclusions: In the daily total production and individual process production, the model that included the worker-related variables produced results that were closer to the real production values. This result indicates the importance of worker elements as input variables, in regards to building accurate simulation models. Also, as suggested in this study, the model that included the worker-related variables can be utilized to analyze in more detail actual production. The results from this study are expected to be utilized to improve the work process and worker efficiency.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2696-2707
• /
• 2021

The purpose of this study is to investigate the efficiency of various structural modeling schemes for evaluating seismic performances and fragility of the reactor containment building (RCB) structure in the advanced power reactor 1400 (APR1400) nuclear power plant (NPP). Four structural modeling schemes, i.e. lumped-mass stick model (LMSM), solid-based finite element model (Solid FEM), multi-layer shell model (MLSM), and beam-truss model (BTM), are developed to simulate the seismic behaviors of the containment structure. A full three-dimensional finite element model (full 3D FEM) is additionally constructed to verify the previous numerical models. A set of input ground motions with response spectra matching to the US NRC 1.60 design spectrum is generated to perform linear and nonlinear time-history analyses. Floor response spectra (FRS) and floor displacements are obtained at the different elevations of the structure since they are critical outputs for evaluating the seismic vulnerability of RCB and secondary components. The results show that the difference in seismic responses between linear and nonlinear analyses gets larger as an earthquake intensity increases. It is observed that the linear analysis underestimates floor displacements while it overestimates floor accelerations. Moreover, a systematic assessment of the capability and efficiency of each structural model is presented thoroughly. MLSM can be an alternative approach to a full 3D FEM, which is complicated in modeling and extremely time-consuming in dynamic analyses. Specifically, BTM is recommended as the optimal model for evaluating the nonlinear seismic performance of NPP structures. Thereafter, linear and nonlinear BTM are employed in a series of time-history analyses to develop fragility curves of RCB for different damage states. It is shown that the linear analysis underestimates the probability of damage of RCB at a given earthquake intensity when compared to the nonlinear analysis. The nonlinear analysis approach is highly suggested for assessing the vulnerability of NPP structures.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.359-369
• /
• 2014

Due to the severe market conditions, pre-entrepreneur seeks to start their business through franchise company. This paper, using the data envelopment analysis(DEA) method, examines efficiency of a group of franchise company in order to provide efficiency information with pre-entrepreneur. Output-oriented DEA model is applied in the investigation of efficiency, and the overall efficiency score is decomposed into pure technical efficiency and scale efficiency. The input variables selected to evaluate the efficiency are franchise deposit, franchise contribution cost and the output variables are sales and number of franchises, and length of business. The results of this paper show franchise industry have the low level of overall efficiency and the main sources of inefficiency is found technical rather than scale. As a result, this paper provides not only the current status of efficiency information of a franchise with pre-entrepreneur but also give warning when they sign-up with franchise business.

• Journal of Digital Convergence
• /
• v.11 no.5
• /
• pp.119-133
• /
• 2013

This study aims to provide power generating plants with eco-efficiency information. To implement the purposes, of study, both DEA(Data, Envelopment Analysis) model and interview were incorporated in terms of methodologies. To analyze the managerial efficiency, total labor cost and number of employees were considered as input factors. CO2, NOx, and water also were considered as input factors to analyze eco-efficiency. Both annual total power product and annual total revenue were used as output factors. CRS(Constant Return to Scale) and VRS(Variable Return to) model were facilitated in this analysis. According to the findings, most of the power plants were evaluated as 'Efficient'' taking into consideration of average value, both 0.928 from CCR model and 0.969 from VRS model. 7 DMUs including DMU3 and DMU12 are efficient out of 35 DMUs relatively, other DMUs are inefficient. For results of inefficient output factors distribution, it was found that inefficiency for NOx was marked relatively higher than CO2. In order to improve the eco-efficiency in the power plants in the long term, the target amount of Co2 as well as NOx reduction needs to be properly proposed in consideration of particularity of power plants. In the long run, renewable energy, alternative fuels should be adapted to reduce the eco-inefficient.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.817-823
• /
• 2017

In the past, research has been conducted on the development of an adaptive cruise control algorithm considering fuel efficiency, and an adaptive cruise control system considering fuel efficiency have been developed. However, research on optimizing vehicle and adaptive cruise control parameters in order to maximize performances is insufficient. In this study, the design optimization of vehicle and control parameters considering fuel efficiency, trackability, ride comfort and safe distance is performed. This paper proposes performance measures of vehicle behavior and develops an adaptive cruise control system. In addition, based on the screening of vehicle parameters that significantly influence performances, kriging surrogate models are constructed through a sequential design of experiment, and kriging surrogate model-based design optimization is performed to maximize fuel efficiency and satisfy target performances.

• Journal of Korea Port Economic Association
• /
• v.36 no.1
• /
• pp.183-196
• /
• 2020

Until now, there have been few studies analyzing the efficiency of the Port of Mokpo and comparing it with other seaports in the country to identify the future direction of development for the port. In this paper, we use the data envelopment analysis (DEA) model in combination with the Malmquist Productivity Index (MPI) to measure the efficiency and productivity of major ports in Korea, focusing on the Port of Mokpo. First, the study identifies which ports are efficient or inefficient based on technical or operational scale. Second, by using the MPI to overcome the shortfalls of the DEA model, the study can compare a port's performance across the years and evaluate the productivity of a port during the research period. Moreover, this study also applies fuzzy C-means (FCM) clustering to classify port groups based on the size of their infrastructure and their efficiency scores. Finally, it is possible to find ways to enhance the efficiency and future direction of development of the Port of Mokpo.