• Journal of the Korean Magnetic Resonance Society
• /
• v.27 no.2
• /
• pp.5-9
• /
• 2023

t ENOD40B, a plant peptide hormone, was doubly labeled with C-13 and N-15 by recombinant production in Escherichia coli. The peptide was prepared by affinity chromatography followed by protease cleavage and reverse-phase chromatography. To elucidate the mode of action against its receptor, sucrose synthase, we proceeded to assign the backbone and side-chain resonances using a set of double and triple resonance experiments. This result will be used to determine the three-dimensional structure of the peptide at its bound state as well as to observe the chemical shift changes upon binding.

• Journal of Welding and Joining
• /
• v.23 no.1
• /
• pp.48-54
• /
• 2005

Laser keyhole welding is investigated using a three-dimensional Gaussian heat source, and the heat source parameters such as the keyhole depth, welding efficiency and power density distribution factor are determined in a systematic way. For partial penetration, the keyhole depth is same as the penetration and is predicted using the experimental data. The welding efficiency is calculated using the ray-tracing method and the power density distribution factor is determined from the bead shape. Full penetration is classified into the transition, normal and excessive modes depending on the degree of keyhole opening. Thermal analysis of the bead-on-plate welds is conducted using the Gaussian heat source, and the calculated weld geometries show reasonably good agreements with the experimental results.

• Structural Engineering and Mechanics
• /
• v.3 no.5
• /
• pp.463-474
• /
• 1995

When a tubular cantilever beam is loaded by a dynamic force applied transversely at its tip, the strain hardening of the material tends to increase the load carrying capacity and local buckling and cross-sectional overlization occurring in the tube section tends to reduce the moment carrying capacity and results in structural softening. A theoretical model is presented in this paper to analyze the deformation of a tubular beam in a dynamic response mode. Based on a large deflection analysis, the hardening/softening M-${\kappa}$ relationship is introduced. The main interest is on the curvature development history and the deformed configuration of the beam.

• Journal of Korean Society for Quality Management
• /
• v.29 no.1
• /
• pp.113-127
• /
• 2001

Skip-lot sampling plans for lot-by-lot inspection are more desirable than the continuous sampling plans for units in modern mass production system under the condition of the submitted product is good. Perry(1973a, 1973b) extended the Dodge(1955)′s skip-lot sampling plans to single and two-level skip-lot sampling plans and Parker & Kessler (1981) modified Perry(1973a)′s plans so that a sample of size one is taken from every lot skipped during the skipping mode. In this paper, Perry(1973b)′s two-level skip-lot sampling plans are modified by applying Parker & Kessler′s plan, designated as MTSkSP1, MTSkSP2, MTSkSP3. Operating characteristic(OC) functions, average sample numbers(ASN) and average outgoing qualities(AOQ) for the proposed plans are derived using Markov chain properties and compared each other and Perry′s plans. The proposed plans not only reduce the ASN but also avoid the danger skipping lots entirely when the lots are produced during sudden "out-of-control".

• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.487-494
• /
• 2013

Purpose: In this study, we propose the precision guided munitions verification methodology using the statistical analysis method has been proposed. and it can be applied to the precision guided munitions quality assurance work. Methods: This modeling is based on Failure Mode and Effects Analysis, Statistical Process Control, Defense Quality Managerment System, Production Readiness Review, Manufacturing Readiness Assesment and so on. Results: The Process Control Modeling that has the following procedures ; searching the critical to quality, statistical analysis by process, verify process. Moreover, the effectiveness of the methodology is verified by applying to the precision guided munitions. Conclusion: To achieve a analysis methods of statistical process control and verify process for precision guided munitions.

• Microbiology and Biotechnology Letters
• /
• v.18 no.5
• /
• pp.501-505
• /
• 1990

Streptomyces sp. KISl3 isolated from soil was found to produce low molecular weight thiol protease inhibitors. The protease inhibitor production was closely linked to the cell growth and regulated by growth condition. The inhibitor was purified from the culture broth through butanol extraction, silicagel 60 column chromatography, Sephadex LH-20 gel filtration and preparative HPLC. The inhibitor showed specific inhibitory activity to thiol protease such as papain, picin and bromelain. The mode of inhibition against papain to Hammersten casein as a substrate was non-competitive.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.06a
• /
• pp.10-20
• /
• 1986

I. 윤활기유 제조시설소개 개요 1) 고급 윤활기유(HVI)생산공장으로서 그간 수입에만 의존하던 최고급 품질의 기유를 국내 수요업체에 안정공급 2) 세계 최신 공정인 Gulf Lube Oil Hydrotreating Process Type III (수소첨가 개질공정)채택 3) 국내 최초일뿐 아니라, 세계에서도 일본, 카낟에 이어 3번째로 건설 1. 고품질 제품 생산-고점도 지수, 산화안정성 및 열안정성 우수, 잔류탄소분, 윤황분, 질소분 극소, 방향족 성분 및 회분 극소, 색상 양호 2. 첨가제(특히 산화방지제 및 점도 지수 향상제)사용효과 상승으로 완제품 생산시 생산비 감소 3. 동일 VI 제품 생산기준 수율이 높음 - Hydrocarbon Structure 변화로 원료 유중 부적합성분의 윤활기유화 4. Severity 조절로 Production Mode 변경 용이 5. 양질의 부산물 생산 - HDT Naphtha, Middle distillate 6. 용제 추출기유는 원유종류 및 성상에 따라 제품특성이 결정되나, 사용가능 원유가 다양 하면서도 제품특성 및 품질이 일정함.

• Journal of Broadcast Engineering
• /
• v.3 no.2
• /
• pp.138-145
• /
• 1998

최근 ATM(Asynchronous Transfer Mode) 네트워크를 비롯한 많은 데이터 전송 기술이 등장하였고, 이를 이용하여 동영상을 전달하는 연구가 진행되고 있다. 그러나 이러한 연구들은 대부분 동영상 데이터의 스트리밍에 주안점을 두고 있기 때문에, ATM 네트워크 기반으로 손실없는 방송 제작 환경을 구축하기 위해서는 에러가 발생하더라도 고속으로 복원할 수 있는 알고리즘이 필요하다. 본 논문에서는 ATM 네트워크 상에서 방송 제작 품질로 압축된 동영상을 TCP(Transport Control Protocol) 기반으로 전송하는 경우에 대하여 연구하였다. 실제 데이터의 송수신에는 잡음으로 인한 ATM 셀의 손실이 발생하게되는데, ATM 셀의 손실로 인한 패킷의 손실은 송신측의 재전송과 재전송 타임 아웃을 유발하므로 전송 성능에 지대한 영향을 미친다. 본 논문에서는 손실된 패킷의 연속적인 재전송을 통하여, 재전송 시간의 단축과 송신측 재전송 타임 아웃의 제거된 고속의 손실 복구 알고리즘을 제안하였고, 그 성능을 기존의 알고리즘과 비교하였다. 또한, 본 논문에서는 영상을 전송하는 과정에서 데이터 수신 버퍼의 오버플로우가 발생하지 않도록 충분한 버퍼 크기를 계산하는 방법에 관해서도 고찰하였다. 특히, 방송 제작 품질의 화질을 처리하는 경우에 대한 시스템 모델링을 하였고, 이 모델에 대하여 오버플로우를 일정 수준 이하로 낮추기 위한 수신 버퍼의 크기를 결정하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.387-390
• /
• 2007

Advanced-MVA(A-MVA) for LCD-TV application was proposed to yield high performance LCD-TV. By utilizing Additional Refresh Technology(ART), which has 2-TFTs but with single source and gate line only. The A-MVA can yield low color washout, fast response, and optimized brightness. AMVA has become the promising solution of advanced LCDTV panels for mass-production.

• Journal of architectural history
• /
• v.11 no.4 s.32
• /
• pp.71-86
• /
• 2002

Since Modern period which is characterized by the governing of technology and capitalism, the production and aesthetics of building became a main issue of architectural discourse. Morever, Modern architecture tends to be a kind of media in which the visual image of building plays a far more important role than building itself. Institutionalized discipline of Architecture in modern system set aside the dwelling aspect of building and destructed close relationship between dwelling and building. This study analyzes the essential meaning of dwelling with a viewpoint of building and vise virsa in order to have a deep reflection on contemporary architecture and modern crisis of dwelling. For this purpose this study first reviewed linguistic and mythical narratives on the origin of dwelling and building. Secondly, reviewed the thought of Heidegger on dwelling and building and his thinking on authenticity of dwelling. Thirdly, reviewed drastic change of idea and reality of dwelling recent days, especially from settlement to nomad. Lastly reviewed E. Levinas' thinking on bodily dwelling or primordial mode of dwelling before poetic dwelling of Heidegger. With these review we can figure out following things on dwelling and building. Physical building or its visual image can not take the place of dwelling in itself. Dwelling and Building happens simultaneously and understood as an event in life world. Today's alienation of dwelling from building reduced our conception of architecture to a physical setting and mere technique. Building must be a ontological and cultural phenomenon beyond physical building. Nomad in this age of information and globalization may be a new mode of dwelling. But it can not exclude traditional way of dwelling on concrete space, because human being as a physical being can not abandon dwelling place that gives a primordial comfort with and within our body.