• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.1011-1017
• /
• 2004

Ultra Wideband(UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as Korean Cellular CDMA and WCDMA. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum CDMA(DS-CDMA) UWB source and an impulse radio UWB source, to a Cellular CDMA and WCDMA digital transmission system. The average frame error rate degradation of each system are presented. From these experimental results, the interference effects of DS-CDMA UWB source is not severe compared to the Impulse UWB.

• Journal of KIISE:Information Networking
• /
• v.37 no.6
• /
• pp.483-488
• /
• 2010

Due to the prevalence of various mobile devices and wireless broadband networks, there has been a significant increase in interest and demand for multimedia streaming services. Moreover, the user can service the participatory video broadcasting service in the mobile device and it can be used to deliver the real-time news and more variety information in the user side. Live multimedia service of user participation should consider not only the video quality but also the delay bounds and continuity of video playback for improving the user perceived QoS (Quality of Service) of streaming service. In this paper, we propose an adaptive rate control scheme, called DeBuG (Delay Bounds Guaranteed), to guarantee the delay bounds and continuity of video playback for the real-time streaming in mobile devices. In order to provide those, the proposed scheme has a quality adaptation function based on the transmission buffer status and network status awareness. It also has a selective frame dropper, which is based on the media priority, before the transmission video frames. The simulation results demonstrate the effectiveness of our proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.26-34
• /
• 2002

Mobile telecommunication systems such as IS-95 and IMT-2000 employ frame based communication using frames up to 20 msec in length and the receiving end has to store the whole frome before it is being processed. The size of the frame buffer ofter dominates those of the processing unit such as soft decision Viterbi decoder. The frame buffer for IMT-2000, for example, has to be increased 80 times as large as that of IS-95. One of the parameters deciding the number of bits in a frame will be obviously the number of bits in soft quantization. Start after striking space key 2 times. This paper has studied a new aspect of offset and quantization step size on BER performance and proposes a new 3-bit soft quantization algorithm which shows similar performance as that of 4-bit soft decision Viterbi receiver. The optimal offset values and step sizes for the other practical quantization levels ---16, 8, 4, 2--- have also been found. In addition, a new optimal symbol metric table has been devised which takes the accumulation value of various repeated signals and produces a rescaled 3-bit valu.tart after striking space key 2 times.

• Journal of IKEEE
• /
• v.13 no.1
• /
• pp.94-100
• /
• 2009

In recent years, the wireless mesh network (WMN) has been an emerging technology to provide Internet access to fixed and mobile wireless devices. The main goal of this paper is the design and simulation of a new MAC protocol based on the multi-path routing information for wireless mesh networks. The information about multiple paths discovered in the network layer is exploited by the MAC layer in order to forward a frame over the best hop out of multiple hop choices. The performance of our approach is compared with conventional 802.11 MAC through the simulation. The results show that our scheme exhibits a significantly better performance rather than conventional 802.11 MAC protocol in terms of packet overhead, end-to-end throughput and delay.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.588-591
• /
• 2004

This paper describes a new approach to Internet host mobility. We argue that local mobility, the performance of existing mobile host protocol can be significantly improved. It proposes Fast Moving Detection scheme that based on neighbor AP channel information and moving detection table. And, it composes Local Area Clustering Path (LACP) domain that collected in AP's channel information and MN interface information. It stored the roaming table to include channel information and moving detection. Those which use the proposal scheme will need to put LACP information into the beacon or probe frame. Each AP uses scheme to inform available channel information to MN. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of the burst blocking probability and the link utilization.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.529-532
• /
• 2005

In this paper, we propose a motion picture processor for CSTN LCD. In order to eliminate flicker phenomenon, the proposed processor suggests a new driving scheme, SFP(Subgroup Frame Pattern). We use an input image compression methode from RGB(:8:8;8) to RGB(5:6:5) to improve quality of the image and apply the image to CSTN Module. The proposed hardware architecture has been implemented and verified using a FPGA on prototype board. The proposed Algorithm provide a lower computational complexity. Therefore the processor can be used in the display devices such as PDA, mobile phone and PMP(Portable Multimedia Player).

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.591-594
• /
• 2001

In the W-CDMA system, cell search is one of the imporant functions of the mobile station searching for a cell and achieving spreading code and time synchronization to its downlink scrembling code. For the methods of cell search to optimize codes, three stages are considered: 1) slot synchronization, 2) frame synchronization, and 3) scrambling code identification. Channels for cell search are Primary Synchronization Channel (P-SCH), Secondary Synchronization Channel(S-SCH), and Common Pilot Channel (CPICH). In this paper, cell search is analyzed based on simulation. Rake receiver provides improvement of Performance as an increase of bandwidth because there are more available multipaths. In this paper, the performance of W-CDMA system employing RAKE receiver is evaluated by computer simulation over the types of ITU_R wideband channel model and spreading rate. The result shows that the performance of CDMA adapting RAKE receiver is improved by the increase of multipath components in equal level of the received power.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.41-46
• /
• 2000

In this paper, we analyze the performance of W-CDMA systems using turbo code in the wideband multipath channel. The strength of each multipath component is assumed to be Rayleigh distributed. Turbo codes of long block sizes have been known to show very good performance in a AWGN channel. Recently, turbo codes of short block sizes suitable for real time communication systems have attracted a lot of attention. Thus, in this paper we consider the turbo code of 1/3 code rate and short frame size of 192 bits in wideband mobile multipath channel. We analyze the performance of W-CDMA systems with 10MHz bandwidths in the case of employing RAKE receiver with not only MRC diversity but also turbo code.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.3
• /
• pp.314-323
• /
• 1999

This paper introduces a methodology of active calibration of a camera pose (orientation and position) using the images of cylindrical objects that are going to be manipulated. This active calibration method is different from the passive calibration where a specific pattern needs to be located at a certain position. In the active calibration, a camera attached on the robot captures images of objects that are going to be manipulated. That is, the prespecified position and orientation data of the cylindrical object are transformed into the camera pose through the two consecutive image frames. An ellipse can be extracted from each image frame, which is defined as a circular-feature matrix. Therefore, two circular-feature matrices and motion parameters between the two ellipses are enough for the active calibration process. This active calibration scheme is very effective for the precise control of a mobile/task robot that needs to be calibrated dynamically. To verify the effectiveness of active calibration, fundamental experiments are peformed.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.3
• /
• pp.99-104
• /
• 2003

Ad-hoc is the wireless network and consists of moving Hosts in environments which don't have a network-based Frame. Because ad-hoc is considered as broadcast network and network which has useful benefits, multicast muting protocols have been studied on ad-hoc network For this work we scrutinized ad-hoc and multicast routing protocols presented in previous works. And we presents a protocol for Ad-hoc network.