• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.113-115
• /
• 2015

In this paper, we proposed an algorithm based on movement prediction using rate of change of the attribute information of nodes what is called WRC(Weighted Rate Control) in delay tolerant networks(DTNs). Existing DTN routing algorithms based on movement prediction communicate by selecting relay nodes increasing connectivity with destination node. Thus, because the mobile nodes are in flux, the prediction algorithms that do not reflect the newest attribute information of node decrease reliability. In this paper, proposed algorithm approximate speed and direction of attribute information of node and analysis rate of change of attribute information of node. Then, it predict movement path of node using proposed weight. As the result, proposed algorithm show that network overhead and transmission delay time decreased by predicting movement path of node.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.372-379
• /
• 2014

When a hand-held device with limited battery transmits and receives data using short-range wireless communication systems, such as WLAN(Wireless Local Area Network) or high speed WPAN(Wireless Personal Area Network), instead of mobile communication systems, the device is able to reduce the power consumption due to the reduced transmission distance. However, if there are many WLAN or high speed WPAN systems around the device, non-negligible power may be consumed by receiving and decoding the packets which have nothing to do with the device. In this paper, we propose a scheme reducing the power consumption by including physical-layer ID in WLAN or WPAN packets and avoiding unnecessary packet receptions. Also, we describe a method to determine the optimum number of physical-layer IDs.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.55-63
• /
• 2007

Multicast is an efficient transport mechanism for community communications and MANET is recently regarded as a promising solution for support ubiquitous computing as an underlying network technology. However, it is hard to deploy multicast mechanism into MANET owing to scarce resources in wireless networks and unpredictable changes in network topology. Several multicast mechanisms have been proposed in the literature to overcome the limitations. Especially, overlay multicasting schemes present several advantages over network based multicasting schemes. Yet, the overlay multicasting schemes still introduce redundant data transmissions that waste network bandwidth and battery of relay nodes. As a result the performance of the network is degraded. To reduce the redundancy, we propose an efficient way to construct an overlay structure as a multicast data delivery tree that utilizes a branch node which belongs to the tree. By using network simulation, we show that the proposed scheme presents higher packet delivery ratio and lower transmission cost than previously proposed schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.892-899
• /
• 2006

In this paper, we propose an automatic switching technology between the ad-hoc and the infrastructure modes without user intervention in the IEEE 802.11b wireless LAN. Also, we design our proposed technology and implemented on the Linux machine. For this operation, the area within an Access Point (AP) coverage is defined as a switching area, and a node without any transmission in this area is assumed to be able to relay frames between the AP and nodes in the shaded area that is outside the coverage and cannot reach the AP. By using the proposed technology, it is possible to provide the seamless Internet access service to nodes at the ad-hoc mode in the shaded area. In this paper, we explains the operation of the detection method of the switching area, presents the flowchart and implementation environment. To prove the operation of our technology, we obtain the results of captured packets transmitted between nodes and throughput results through ftp transmission experiment. Hence, we can see that our proposed scheme can be improve the wireless access service in wireless and mobile networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.403-410
• /
• 2008

In this paper, we investigate the performance of MMR system in Non-transparent mode. The IEEE 802.16j MMR system has two node of operation, Single-frame (in band) and Multi-frame (out band) mode. In the analysis, we assume that channel interference between MR-BS and RS, or between RSs anywhere in the given area is ignored. The performance is presented in terms of the delay and the frame efficiency by varying number of RS and BS coverage to RS coverage ratio and the maximum coverage area of a BS by varying traffic density. Analytical results show that the Single-frame is more efficient than Multi-frame in frame efficiency and coverage extension.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.2
• /
• pp.46-53
• /
• 2007

Extension of the mobile communication and the rapidly developing services connected with wireless multimedia(W-CDMA, DMB, Wibro, and so on) need great many base station transceiver systems, antennas, and many signal transmission line to embody these services. The min communication appliances system is exposed always in danger of transient overvoltage by direct stroke or induced lightning surge flowing in through antenna because the antenna of base station transceiver system or relay equipment is combined with expensive communication network equipments through signal transmission line. Now, gas discharge tube(GDT) or narrow band stub arrestor which is used by the surge protector for communication use is exposing limitations as for lightning surge protective means of the communication facility with high speed and wide frequency band. Therefore, for improving performance of surge arrestor, we applied ceramic filter which can reduce lightning surge invading from antenna effectively, and proved that ceramic filter is effective in residual voltage reduction through the experimental research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.189-197
• /
• 2016

Mobile ad-hoc networks (MANETs) experience frequent link disconnections due to non-uniform node distribution and mobility. Thus, end-to-end path establishment-based routing protocols cause frequent transmission failures in MANETs, resulting in heavy control messages for path reestablishment. While location-based MANET routing protocols, such as Greedy Perimeter Stateless Routing (GPSR), use location information to forward messages in a hop-by-hop routing fashion without an end-to-end path establishment procedure, such protocols encounter communication void problems when message forwarding to the next hop fails due to the absence of a relay node. Therefore, to solve this problem, this paper proposes a Delay Tolerant-GPSR (DT-GPSR) protocol, which combines Delay Tolerant Networking (DTN) technology with the GPSR protocol. The performance of DT-GPSR is compared with the performances of the original GPSR and PRoPHET routing protocols through simulation using NS-2. The simulation results confirm that DT-GPSR outperforms GPSR and PRoPHET in terms of the message delivery ratio and message delivery delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2113-2119
• /
• 2006

In this paper, we design the r-Sensor protocol for reliable data transmission in the Intelligent Home Service based on the wireless sensor network environment. The r-Sensor protocol improve the reliability of data transmission and node fairness using simple routing algorithm, congestion control, and loss recovery method that minimize the load of relay node. Reposed routing algorithm find out upstream and downstream nodes using the Network Management packet. Meanwhile, loss recovery algorithm uses the Aggregated-Nack. To apply supposed algorithm, the IHS-AMR(Intelligent Home Service - Automatic Meter Reader) and sensor node are designed and implemented in hardware. The IHS-AMR provides remote metering service and also offers home safety service by internetworking with sensor network, mobile phone network and internet.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.3
• /
• pp.48-58
• /
• 2009

Geo-graphical routing protocols as GPSR are known to be very suitable and useful for vehicular ad-hoc networks. However, a corresponding node can include some stale neighbor nodes being out of a transmission range, and the stale nodes are pone to get a high priority to be a next relay node in the greedy mode. In addition, some useful redundant information can be eliminated during planarization in the recovery mode. This paper deals with a new recovery mode, the Greedy Border Superiority Routing(GBSR), along with an Adaptive Neighbor list Management(ANM) scheme. Each node can easily treat stale nodes on its neighbor list by means of comparing previous and current Position of a neighbor. When a node meets the local maximum, it makes use of a border superior graph to recover from it. This approach improve the packet delivery ratio while it decreases the time to recover from the local maximum. We evaluate the performance of the proposed methods using a network simulator. The results shown that the proposed protocol reveals much better performance than GPSR protocol. Please Put the of paper here.

• Journal of Digital Contents Society
• /
• v.15 no.4
• /
• pp.481-489
• /
• 2014

In this paper, the automatic standby power blocking socket outlet to reduce standby power by blocking power threshold is implemented. Where, the standby power means a flowing power when a disused power electronic is plugged into the socket outlet. The proposed socket outlet can cut off the standby power by establishing a proper block power threshold electronic device according to each electronic device because it can monitor the amount of power through the smart machines such as the real-time PC or mobile phone and directly control the blocking power threshold. The software is implemented by using Visual Studio software, code vision and SN8 C studio, and the hardware is embodied in ATmega128, SN8F27E93S, USB to UART, and relay etc. Through the simulation, we find that the standby power of the proposed method is similar to that of the conventional method in case of the cellular phone but the standby power of the proposed method is much less than that of the conventional method in case of the computer, air conditioning, and set-top box. Therefore, it is proved that the proposed socket outlet has a superior performance in terms of the standby power.