• Journal of radiological science and technology
• /
• v.22 no.2
• /
• pp.33-39
• /
• 1999

This paper included a data analysis of the unit of medical devices using mainternance recording card that had medical devices of unit failure mode, hospital of failure mode and MTBF. The results of the analysis were as follows : 1. Medical devices of unit failure mode was the highest in QC/PM such A hospital as 33.9%, B hospital 30.9%, C hospital 30.3%, second degree was the Electrical and Electronic failure such A hospital as 23.5%, B hospital 25.3%, C hospital 28%, third degree was mechanical failure such A hospital as 19.5%, B hospital 22.5%, C hospital 25.4%. 2. Hospital of failure mode was the highest in Mobile X-ray device(A hospital 62.5%, B hospital 69.5%, C hospital 37.4%), and was the lowest in Sono devices(A hospital 16.76%, B hospital 8.4%, C hospital 7%). 3. Mean time between failures(MTBT) was the highest in SONO devices and was the lowest in Mobile X-ray devices which have 200 - 400 failure hours. 4. Anverage failure ratio was the highest in Mobile X-ray devices(A hospital 31.3%, B hospital 34.8%, C hospital 18.7%), and was the lowest in Sono(Ultrasound) devices (A hospital 8.4%, B hospital 4.2%, C hospital 3.5%). 5. Failure ratio results of medical devices according to QC/PM part of unit failure mode were as follows ; A hospital was the highest part of QC/PM (50%) in Mamo X-ray device and was the lowest part of QC/PM(26.4%) in Castro X-ray. B hospital was the highest part of QC/PM(56%) in Mobile X-ray device, and the lowest part of QC/PM(12%) in Gastro X-ray. C hospital was the highest part of QC/PM(60%) in R/F X-ray device, and the lowest a part of QC/PM(21%) in Universal X-ray. It was found that the units responsible for most failure decreased by systematic management. We made the preventive maintenance schedule focusing on adjustement of operating and dust removal.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.29 no.2
• /
• pp.49-60
• /
• 2023

Purpose: This study aims to establish detailed spatial planning by identifying the needs for a seclusion module for emergency psychiatric patients. Methods: The necessity of medical space with seclusion function was analyzed from spatial, medical, and social perspectives. The needs for a space capable of performing three medical functions: protection, isolation, and treatment, was analyzed. Among various types of mobile medical facilities, seclusion space was considered suitable for utilizing modular construction methods, as it is the most rational method that can satisfy the environmental level of fixed healthcare facilities' space. Therefore, seclusion modules based on modular construction were planned, consisting of two protective units for stabilizing patients with psychiatric illness, one for treatment unit that can accommodate both internal and external treatment, and another one for an infectious disease isolation unit equipped with negative pressure equipment. Implications: This study analyzed the necessary medical functions of the interior space of the mobile stabilization module based on the spatial analysis of existing medical facilities, and proposed alternative spatial configurations according to treatment, seclusion, isolation functions.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.1
• /
• pp.7-21
• /
• 2022

Purpose: As the pandemic period continues, various attempts are being made to new medical spaces in the medical society. Many hospitals, including existing general hospitals, have been effected by infected patients and are showing limitations in patient care capacity. Mobile-hospitals may be the starting point for the development of new environment in the medical society and healthcare facilities which are not replacing the role of existing hospitals. Mobile-hospitals can possibly respond to situations that require medical services and provide emergency care for various demands in connection with existing healthcare facilities. Methods: Through a total of five investigations/analysis, medical functions that can be inserted into mobile-hospitals based on modular architecture are set. The first is the analysis of domestic legal guidelines, the second is the analysis of previous studies, the analysis of emergency medical facilities and other medical spaces of hospitals to be compared, the fourth is the analysis of medical spaces of actual mobile hospital projects. Results: Through five analyses, medical functions applicable to the modular building platform were finally established. Mobile hospitals can be used not only in disaster sites such as infectious diseases, but also in medical underprivileged areas or general hospitals. Therefore, it is necessary to establish medical functions that meet the specificity of mobile hospitals along with the functions of existing fixed medical facilities. Furthermore, various studies such as use in international aid, use in normal times, and connection with other platform-based medical facilities are considered necessary. Implications: Through 5 strategies of analysis, 41 medical functions which can be applied to UNIT are decided and these functions will be placed where medical services will be required.

• Korean Journal of Digital Imaging in Medicine
• /
• v.13 no.3
• /
• pp.139-144
• /
• 2011

The purpose of this report is recommending a standard indicator which reflects the radiation exposure that is incident on a detector after every exposure event and that reflects the noise levels present in the image data. The experiment was performed with mobile digital X-ray unit and used a acrylic phantom for exposure index measurement. Exposure modality was kVp, mAs, SID. After every exposure, make a data sheet for characteristic curve of detector response. The equipment performed Mobile digital X-ray unit provide the user with values ralated to the incident exposure(air kerma)to the digital detector. They are showed as a logarithmic function shaped. As a result, DEI means a relative measure of exposure to the detector, as compared to the expected exposure for a particular anatomical view. Radiographic technique is the combination of factors used to exposure an anatomical part to produce a high quality radiography and technique charts used most commonly by radiographers to produce consistently exposure level which patient dose can be kept acceptably low.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.4
• /
• pp.17-25
• /
• 2019

Purpose: Despite the fact that the needs for disaster emergency medical facilities to minimize casualties are increasing, research for emergency medical facilities is insufficient compared to research for DMAT investment. A management strategy for emergency medical facilities in disaster site needs to be proposed. Methods: Recently there was introduction of mobile hospital system using unit modular method, but it was found out to be used only in disaster emergency training. Emergency medical facilities in disaster site require various tasks. Examination for our research was carried out through consultations with emergency medical and mobile hospital expert because there is no practical use case to apply Emergency Medical Facilities in Korea. Result: In this research we proposed a management strategy to manage and operate emergency medical facilities composed of tent, unit module and container in the aspects of management efficiency. Implications: It is highly expected to establish a foundation for fast and accurate disaster emergency medical facilities deployment by applying the results of our research to Emergency response manual of disaster emergency medical service.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.1
• /
• pp.5-8
• /
• 2010

Opened a court in February 10, 2006, a rule of safety management of the diagnosis radiation system was promulgated for safety of the radiation worker, patients and patients' family members. The purpose of this rule is to minimize the risk of being exposed to radiation during the process of handling X-ray. For this reason, we manufactured shielding device of mobile X-ray unit collimator for diminution of skin dose. Shielding device is made to a thickness of Pb 0.375mm. For portable chest radiography, we measured skin dose 50cm from center ray to 200cm at intervals of 20cm by Unfors Xi detector. As a result, a rule of safety management of the diagnosis radiation system has been strengthened. But there are exceptions, such as ER, OR, ICU to this rule. So shielding device could contribute to protect unnecessary radiation exposure and improve nation's health.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.6
• /
• pp.57-64
• /
• 2017

Recently, the disaster situation has been diversified and compounded worldwide as well as in Korea. And the damage scale of each disasters have increased, and following economic loss is also increasing immensely. In Korea, especially the out break frequency of large-scale disasters has increased. Disasters caused by earthquakes are also very likely to occur. When a major accident such as Mauna resort collapse accident, Ferry sewol sinking accident occurred, systematic emergency medical care at the site at the time of disaster occurred in order to operate an emergency medical facility corresponding to the site, which is not systematic. The need for this service is urgent. If highly reliable emergency medical system function at appropriate times in the disaster site, secondary damage can be reduced and the whole situation would be back to normal shortly. Therefore, it is necessary to provide an emergency medical system capable of quickly and safely responding to disaster sites in relation to various damage scale. For the purpose, thorough analysis on mobile medical units of inside and outside the country was accomplished. As a result, Mobile Medical Unit of outside the country are trailer type, tent type, container type etc. At home, these types have been studied and will be proposed early next year as a temporary solution. Here we introduce suitable types for our country.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.506-508
• /
• 2006

A frequency selective surface (FSS), whose unit cell consists of a ternary tree loop loaded with a modified tripole, is proposed to block multiple frequency bands. Target frequency bands correspond to Korean personal communication services, cellular mobile communication, and 2.4 GHz industrial, scientific, and medical bands. Through the adjustment of inter-element and inter-unit cell gaps, and adjustment of the length of elements, we present an FSS design method that makes the precise tuning of multiple resonance frequencies possible. Additionally, to verify the validity of our approach, simulation results obtained from a commercial software tool and experimental data are also presented.

• The Korean Journal of Emergency Medical Services
• /
• v.23 no.1
• /
• pp.125-134
• /
• 2019

Purpose: The aim of this study was to evaluate the usefulness of video communication with medical staff located at a remote location, through a communication application connected to a long term evolution (LTE) mobile communication network in a moving ambulance. Methods: In this study, we recruited patients who were transferred by mobile intensive care unit ambulance from one hospital to another. In the moving ambulance, the information of the patient was transferred to a physician using the application in real time. Recorded video files were evaluated by emergency physicians with experience in video direct medical control. Results: A total of 18 patients were evaluated, and the average score was 5.9 out of a possible 9. It was expected that applying the use of the technology to actual clinical sites would enable the sites to provide assistance. Conclusion: In this study, we confirmed the possibility of benefiting from the clinical field when using the video-audio communication application which is connected to the remote location in real time through the current LTE mobile communication network in the ambulance.

• Biomedical Science Letters
• /
• v.27 no.4
• /
• pp.310-316
• /
• 2021

Mobile phones used by healthcare workers are not only an indicator of the contamination of healthcare associated bacteria, but can also be another source of infection. The number and time of handwashing, mobile phone operation time and disinfection were highly relation with the bacterial contamination on the surface of mobile phone. Healthcare associated bacteria isolated from the mobile phone surface were 28 MRCoNS (48.3%), 14 S. aureus (24.2%), 3 MRSA (5.2%), 5 A. baumannii (8.6%), 3 MRAB (5.2%), 3 Entrococcus spp. (5.1%), 2 Pantoea spp. (3.4%), 2 A. lowffii (3.4%), 1 E. cloacae (1.7%), 1 P. stutzeri (1.7%), and P. mirabillis (1.7%). For isolation according to department, 2 MRAB from the emergency room and 1 MRSA from intensive unit, the radiology team and the rehabilitation medical team, respectively were isolated. As a result of the relation of isolates from the department of patient contact (ER, RT, GW, CP, ICU, RMT), the bacterial isolation rate was 75% and the department of patient non-contact (MRT) was 10%.