• Journal of the Korea Safety Management & Science
• /
• v.11 no.1
• /
• pp.15-26
• /
• 2009

This research has so far found out problems including the second damage of extinguishant and the short time of emission when using the existing dry chemical extinguisher and gas type extinguisher, and impossibility of constant extinguishing due to the inability of recharge at the field. To solve such problems, a mobile water mist system was developed and used. However, it is judged that more improved mobile water mist system is necessary because the force of the fire changed diversely and remote villages in mountains or islands where the force of fire extinguishing is short or delayed, require high capacity of fire extinguishing. Therefore a new equipment was developed and tested focusing on the improvement of extinguishing capacity and the performance of extinguishing was found out to be improved, compared to the existing mobile water mist system. It also showed a superior extinguishing capacity to dry chemical extinguisher or gas type extinguisher. Afterward an additional research is required of simplification of equipment, price cutting and the development of additive to enable high performance even with just small extinguishant.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.69-81
• /
• 2000

Under the co-sponsorship of UNIDROIT and I.C.A.O., a preliminary draft Convention on International Interests in Mobile Equipment and a preliminary draft Protocol on Matters Specific to Aircraft Equipment has been prepared. The purpose of the Convention is to provide for the creation and effect of a new international interest in mobile equipment. The Convention's approach is quite novel in that it purports to create an international interest based upon the convention itself. The Convention is intended to be supplemented by Protocols, each of is intended to provide equipment-specific rules necessary to adapt the rules of the Convention to fit the special pattern of financing for different categories of equipment. To date, two sessions of governmental experts were held in Rome and Montreal. Korean delegations attended the two sessions. One of the members of the Korean delegation published a report on the first session. He expressed his objection to the so called self-help remedy contemplated by the current preliminary draft of the Convention which enables the holder of a security interest to repossess and dispose of the subject of the security interest by private sale rather than public auction on the occurrence of an event of default of the debtor. His view is based upon his understanding that under Korean law, the only remedy available to the holder of a security interest in mobile equipment, such as an airplane, is to apply to the competent court for a public auction. In my view, his understanding is not quite correct and is inconsistent with the current practice in Korea. Under Korean law, the parties' agreement for private sale is in principle valid unless there is an interested party who has acquired a security interest after the creation of the prior security interest or a creditor who has caused the subject of the security interest to be attached by a competent court. In this article, I discuss the current Korean law and practice relating to the enforcement of security interests by private sale in more detail.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.7
• /
• pp.543-551
• /
• 2016

This paper presents the analysis and implementation of traveling surface characteristics test equipment using optical mice in connection with the velocity estimation of a mobile robot equipped with optical mice. In the traveling surface characteristics test equipment, a traveling surface sample is made to rotate toward stationary optical mice instead of a mobile robot equipped with optical mice moving over a traveling surface. First, the conceptual design and operational principle of the traveling surface characteristics test equipment is explained. Second, the velocity kinematics of the traveling surface characteristics test equipment is formulated; based on this, the parameter setting of the traveling surface characteristics test equipment is described. Third, the implementation of the traveling surface characteristics test equipment is described in detail, including the mechanical design and construction and the hardware and software development. Fourth, using the prototype of the traveling surface characteristics test equipment, the experimental results of the statistical parameter extraction for different traveling surface samples are given. Finally, some potential usages of the traveling surface characteristics test equipment are discussed.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.736-743
• /
• 2022

Construction workers experience a high rate of fatal incidents from mobile equipment in the industry. One of the major causes is the decline in the acoustic condition of workers due to the constant exposure to construction noise. Previous studies have proposed various ways in which audio sensing and machine learning techniques can be used to track equipment's movement on the construction site but not on the audibility of safety signals. This study develops a novel framework to help automate safety surveillance in the construction site. This is done by detecting the audio sound at a different signal-to-noise ratio of -10db, -5db, 0db, 5db, and 10db to notify the worker of imminent dangers of mobile equipment. The scope of this study is focused on developing a signal processing model to help improve the audible sense of mobile equipment for workers. This study includes three-phase: (a) collect audio data of construction equipment, (b) develop a novel audio-based machine learning model for automated detection of collision hazards to be integrated into intelligent hearing protection devices, and (c) conduct field experiments to investigate the system' efficiency and latency. The outcomes showed that the proposed model detects equipment correctly and can timely notify the workers of hazardous situations.

• Journal of Advanced Navigation Technology
• /
• v.12 no.1
• /
• pp.15-21
• /
• 2008

In this paper, person monitoring and personal identification information management by using the location positioning device and the location management system based on GPS is analysed and developed. Mobile HTE(Mobile HTE : Mobile Home Terminal Equipment) of the developed system uses the module for transmitting PID(Personal Identification Device) information and the module based on GPS's location information. HTE transmits the received information from Mobile HTE to the Location Management System through the internet system. The Location Management System is developed for person location management and information management.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.56-63
• /
• 2020

The Avengers film produced by Marvel Comics shows visual effects that were impossible to produce in the past. Companies that produce film special effects were initially equipped with large personnel and equipment, but technology is gradually evolving to be feasible for smaller companies that do not have high-priced equipment and a large workforce. The development of hardware and software is becoming increasingly available to the general public as well as to experts. Equipment and software which were difficult for individuals to purchase before quickly popularized high-performance computers as the game industry developed. The development of the cloud has been the driving force behind software costs. As augmented reality (AR) performance of mobile devices improves, advanced technologies such as motion tracking and face recognition technology are no longer implemented by expensive equipment. Under these circumstances, after implementing mobile-based facial capture technology in animation projects, we have identified the pros and the cons and suggest better solutions to improve the problem.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.661-667
• /
• 2010

A lot of existence e-learning are connected SCORM and LMS. And u-learning was researching as one of the new trend. But there are few research paper to connect the existing SCORM and LMS. In this paper, we proposed u-learning framework with connect the SCORM and LMS. And we used the mobile equipment transform module and learning object reconstruction module to apply each different characteristics of mobile equipment. Especially, information of the mobile equipment was stored and managed using the meta-data of the equipment.

• Korean Journal of Digital Imaging in Medicine
• /
• v.11 no.2
• /
• pp.85-92
• /
• 2009

This study, "The study about performance evaluations of mobile cover for X-ray's diffusion and distribution in mobile radiation" is based on the rules of mobile defense apparatus for radiation producer in 2006. To use the mobile cover for X-ray for diagnosis has been compulsory in common wards except operation rooms, emergency rooms and intensive care units. we have confirmed the effect in arbitrary shielding material after Qualitiy Control was carried out for accuracy in an experiment of mobile photographing equipment. The performance evaluation was conducted with the fabrics of selenium, 0.2 mmPb, 0.1 mmPb and aluminiums. Considering the result, we choosed 0.1 mmPb and attached cover to mobile photographing equipment. We have finished making the cover after drew up the draft to attach cover to mobile photographing equipment through the modeling and the structural analysis. the process of the study is that we assembled the manufactured structures and carried out the practical experiment to take the photograph after attaching the fabric of 0.1 mmPb to mobile photographing equipment. It is need of additional thesises hereafter that we compare the result between the part to improve for safety besides convenience in photographic experiment about clinical radiation and the effect of covering the diffusion in condition attached the cover.

• Journal of Internet Computing and Services
• /
• v.22 no.5
• /
• pp.9-16
• /
• 2021

Recently, the traffic volume of mobile communications increases rapidly and the small-cell is one of the solutions using two offload schemes, i.e., local IP access (LIPA) and selected IP traffic offload (SIPTO), to reduce the end-to-end delay and amount of mobile data traffic in the core network (CN). However, 3GPP describes the concept of LIPA and SIPTO and there is no decision algorithm to decide the path from source nodes (SNs) to destination nodes (DNs). Therefore, this paper proposes a dynamic mobile data traffic offload scheme using small-cells to decide the path based on the SN and DN, i.e., macro user equipment, small-cell user equipment (SUE), and multimedia server, and type of the mobile data traffic for the real-time and non-real-time. Through analytical models, it is shown that the proposed offload scheme outperforms the conventional small-cell network in terms of the delay of end-to-end mobile data communications and probability of the mobile data traffic in the CN for the heterogeneous networks.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.938-945
• /
• 2008

Rockfall and landslide bring about a great social loss with loss of property such as obstruction of traffic and damage of the crops as well as casualty. The purpose of this study is to develop a mobile equipment for local risk factors detecting of road slope. The mobile equipment is designed to receive the sensing data from the measurement sensors, which are installed to detect the dangerous signs from the slopes, as loaded on a vehicle which is moving around to the places where the sensors are installed. In general, more than one mandatory data logger, which is very expensive, must be installed at each slope for the automatic measuring system, but in case of this developmental system, the inexpensive routine measurement can be performed regardless of the number of slopes due to the single unit of information gathering vehicle. This study is going to develop technologies that are expected to be applied to not only slope but also tunnel and bridges which might have the partial risk and need measuring.