• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.719-728
• /
• 2023

Purpose: Mobile cranes are machines that contribute to high mortality, and the High Risk Factor (SIF) information, which analyzed 2,574 accidental deaths in the construction industry in the past 6 years (2016~2021), resulted in a total of 61 mobile crane accidents. Despite safety measures in the field, it is not used properly. In this study, we present standard risk assessment indicators that contribute to accident prevention. Method: Through expert interviews, fatal accident case analysis, field analysis, and literature research, we present the standard risk assessment index method of the 4M risk assessment method. Result: As a result of analyzing the risk assessment of eight sites, it was concluded that it cannot make a significant contribution to disaster prevention and should be applied as an improvement measure of the Standard Risk Assessment Index Law. Conclusion: Switching to the standard risk assessment index method at construction sites has been proposed to make it easier for health and safety personnel and workers to use, contributing to the reduction of accidents.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.7
• /
• pp.629-636
• /
• 2010

A Mobile Harbor is a new transportation platform which can load and unload has containers to and from very large container ships on the sea. Currently designed Mobile Harbor a catamaran type which is equipped with precisely controlled gantry crane on the deck, and can transport 250 TEUs at a time. Loading and unloading works by crane require very small motion of Mobile Harbor in waves, because it may be operated outside of harbors. In this project, applicability of both tuned-type anti-rolling tank and maglev-type active mass driver is studied as anti-rolling systems.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.41-52
• /
• 1992

An algorithm of transforming continuous-time state feedback gains into equivalent discrete-time feedback gains or vice versa is proposed using bilinear transformation. The proposed method is evaluated experimentally by an application control of a mobile crane system which is implemented by 16bits micro computer with A/D and D/A converters. It has been shown from the experimental result that the transformed feedback gains are virtually identical to the optimal discrete gain over range of significant sampling time. Since the transformed matrix is composed by a distinct relationship between continuous-time gain and discrete-time gain, it is noted that the proposed method can be regarded as an explicit gain transformation method compared to the other methods using series expansion.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.227-235
• /
• 2017

In this paper, a systematic 5-mode(road steering, all-wheel steering, crab steering, reduced swing out mode and independent steering) steering algorithm design process for an all-terrain mobile crane with 5 axles and all steerable wheels is proposed. Steering angles for each steering mode are designed based not only on basic theory but also on vehicle specification, design limitation and requirements. A multi-body dynamic analysis is carried out to investigate the feasibility of the steering algorithm. According to the results, the proposed steering algorithm meets the objective of each steering mode.

• Plant Journal
• /
• v.8 no.2
• /
• pp.59-69
• /
• 2012

This study focuses on avoiding the failures from the wrong selections by experiences as simulation programs is not available, and suggests the methods which effectively select the alternatives when the selected model is not appropriate for the original plan. First, CC8800-1K of DEMAG has the longest boom whose length is 216 m at the maximum. The combination of the boom is feasible to second level except for MANITIWOC M 2250 (M-1200 RINGER) which is possible to third level. Second, the angle of boom is from 20 degrees to 82 degrees. Suitable angle to work is in the 55-78 degrees. The working load of crawler type and hydraulic one to be applied is 75-85% in the critical loads capacity. As increasing operating radius, crawler type is a favorable position over hydraulic one. Lastly, related problems were verified through examination by suggestions for the design of the selection methods for the case analysis. The major problems are stemming from the selection based on its experiences, unreasonable demand for the existing facility and repeated selections by the designer who accumulates his experiences via same or similar projects.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.3
• /
• pp.115-122
• /
• 2007

As buildings become higher, larger, and more complex, safety issues for construction workers working at such environments become more important. We analyzed 83 critical accident cases reported to the KOSHA(Korea Occupational Safety & Health Agency) for construction cranes by types of cranes and by patterns of accidents and causes. There are more number of accidents related to mobile cranes than that related to tower cranes, but the numbers of dead were similar in both cases. The most dominant cause of crane accidents was "fall of materials". We also analyzed the cases of crane accidents using the FMEA(Failure Mode and Effect Analysis) in order to set up a priority for safety management and also to prioritize research and development items relating tower cranes. In the process, we tried to eliminate subjective indexes such as an expert group survey and use objective and quantitative indexes. As a result, it was found that critical crane accidents occurs most during the "lifting and translating" activity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.467-468
• /
• 2010

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.597-604
• /
• 2010

This study focuses on the design of a mechanical joint for a zero moment crane (ZMC), which is a specialized loading/unloading system used in a mobile harbor (MH). The mechanical joint is based on the concept of zero moment point (ZMP), and it plays an important role in stabilizing a ZMC. For effective stabilization, it is necessary to ensure that the mechanical joint is robust to a wide variety of loads; further, the joint must allow the structures connected to it to perform rotational motion with two degrees of freedom By adopting a traditional design process, we designed a new mechanical joint; in this design, a universal joint is coupled with a spherical joint, and then, deformable rolling elements are incorporated. The rolling elements facilitate load distribution and help in decreasing power loss during loading/unloading. Because of the complexity of the proposed system, Kriging-based approximate optimization method is used for enhancing the optimization efficiency. In order to validate the design of the proposed mechanical joint, a structural analysis is performed, and a small-scale prototype is built.

• Ocean Systems Engineering
• /
• v.2 no.3
• /
• pp.217-228
• /
• 2012

As the size of container ships continues to increase, not many existing harbors can host the super-container ship due to its increased draft and the corresponding dredging requires huge budget. In addition, the minimization of waiting and loading/offloading time is the most important factor in harbor competitiveness. In this regard, mobile-harbor concept has been developed in Korea to achieve much improved harbor capacity and efficiency. In developing the concept, one of the most important elements is the operability of crane between two or more floating bodies in side-by-side arrangement. The container ship is to be stationed through a hawser connection to an outside-harbor fixed-pile station with the depth allowing its large draft. The mobile harbors with smart cranes are berthed to the sides of its hull for loading/offloading containers and transportation. For successful operation, the relative motions between the two or more floating bodies with hawser/fender connections have to be within allowable range. Therefore, the reliable prediction of the relative motions of the multiple floating bodies with realistic mooring system is essential to find the best hull particulars, hawser/mooring/fender arrangement, and crane/docking-station design. Time-domain multi-hull-mooring coupled dynamic analysis program is used to assess the hydrodynamic interactions among the multiple floating bodies and the global performance of the system. Both collinear and non-collinear wind-wave-current environments are applied to the system. It is found that the non-collinear case can equally be functional in dynamics view compared to the collinear case but undesirable phenomena associated with vessel responses and hawser tensions can also happen at certain conditions, so more care needs to be taken.

• Steel and Composite Structures
• /
• v.21 no.5
• /
• pp.963-980
• /
• 2016

The jib system with middle strut is widely used to achieve the large arm length in the large scale tower crane and the deployability in the mobile construction crane. In this paper, an analytical solution for the out-of-plane buckling of the jib system with middle strut is proposed. To obtain the analytical expression of the buckling characteristic equation, the method of differential equation was adopted by establishing the bending and torsional differential equation of the jib system under the instability critical state. Compared with the numerical solutions of the finite element software ANSYS, the analytical results in this work agree well with them. Therefore, the correctness of the results in this work can be confirmed. Then the influences of the lateral stiffness of the cable fixed joint, the dip angle of the strut, the inertia moment of the strut, and the horizontal position of the cable fixed joint on the out-of-plane buckling behavior of the jib system were investigated.