• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.307-312
• /
• 2016

Lead molybdate ($PbMoO_4$) was successfully synthesized using a facile surfactant-assisted hydrothermal process and characterized by XRD, Raman, TEM, PL, BET and DRS. We also investigated the photocatalytic activity of these materials for the decomposition of Rhodamine B under UV-light irradiation. From XRD and Raman results, well-crystallized $PbMoO_4$ crystals were successfully synthesized with the particle size of 52-69 nm. $PbMoO_4$ catalysts prepared in the presence of cetyltrimethyl ammonium bromide (CTAB) enhanced the photocatalytic activity compared to that of using P-25 and pure $PbMoO_4$ catalysts. The maximum photocatalytic activity of $PbMoO_4$ catalyst were observed when preparing it in pH 9 solution. The The PL peak at about 540 nm were observed for all catalysts and the excitonic PL signal increased proportionally with respect to the photocatalytic activity of Rhodamine B.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.435-439
• /
• 2010

Pt-$MoO_3$ electrodes were fabricated on ITO-coated glass by electrodeposition method using 20 mM hydrogen hexachloroplatinate ($H_2PtCl_6$) and 10 mM Mo-peroxo electrolyte. Deposition order was varied, and catalytic activities of synthesized electrodes were compared with that of pure Pt electrode. Scanning Electron Microscopy (SEM) was utilized to examine surface morphology. The crystallinity of synthesized films was analyzed by X-ray Diffraction (XRD), and the oxidation state of both the platinum and molybdenum were determined by X-ray Photoelectron Spectroscopy (XPS) analyses. The catalytic activity and stability for methanol oxidation were measured using cyclic voltammetry (CV) and chronoamperometry (CA) in a mixture of 0.5 M $H_2SO_4$ and 0.5 M $CH_3OH$ aqueous solution. $MoO_3$ electrodeposited on the surface of Pt showed much higher catalytic acitivity and stability than pure Pt electrode due to the good contact between Pt and $MoO_3$.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.9
• /
• pp.766-771
• /
• 1994

A number of molybdenum(VI), -(V), and -(IV) oxo complexes with S-methyl 3-(2-hydroxyphenyl)methylenedithiocarbazate and its derivatives as the ONS-donor metal-binding substrate are synthesized. The Mo(VI)-dioxo complexes are cis-dioxo Mo$O_2$L(D), where D is solvent molecules such as MeOH, DMF, Py(pyridine), DMSO, and ${\gamma}$-Pic(${\gamma}$-picoline). The Mo(V)-oxo complexes are of the type (PyH)[MoO(NCS$)_2$L] with an octahedral geometry. The Mo(IV)-oxo complexes, MoOL are derived from corresponding Mo(VI)-dioxo complexes by oxo abstraction with PP$h_3$. The complexes are characterized by IR, $^1$H-NMR, UV-Vis spectroscopy and cyclic voltammetry. On the basis of ligand displacement reaction, the qualitative order of D binding for Mo$O_2$L(D) complexes is also discussed.

• Advances in materials Research
• /
• v.1 no.3
• /
• pp.191-204
• /
• 2012

In this paper, we report on the obtention of nanocrystalline $SrMoO_4$ synthesized through modified combustion process. These powders were characterized by X-ray diffraction, Fourier Transform Raman and Infrared Spectroscopy. These studies reveal that the scheelite-type $SrMoO_4$ crystallizes in tetragonal structure with I41/${\alpha}$ (N#88) space group. Transmission electron microscopy image shows that the nanocrystalline $SrMoO_4$ powders have average size of 18 nm. The optical band gap determined from the UV-V is absorption spectra for the as prepared sample is 3.7 eV. These powders showed a strong green photoluminescence emission. The samples are sintered at a relatively low temperature of $850^{\circ}C$. The morphology of the sintered pellet is studied with scanning electron microscopy. The dielectric constant and loss factor values obtained at 5 MHz for a well sintered $SrMoO_4$ pellet has been found to be 9.50 and $7.5{\times}10^{-3}$ respectively. Thus nano $SrMoO_4$ is a potential candidate for low temperature co-fired ceramics and luminescent applications.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.24-31
• /
• 1999

Ammonia gas sensors were fabricated with ZnO-based thin films grown by RF-magnetron sputtering method. The films which were doped with $MoO_3$ catalysts of various weight percents were grown in different sputtering gases to fabricate the sensors with a high sensitivity, low working temperature and rapid response time. To improve electrical stability, the films were aged in various conditions. The sensors doped with the catalysts and grown in oxygen sputtering gas showed the improvement of sensitivity. These exhibited the increase of surface carrier concentration and electron mobility. The sensor with 0.875wt.% $MoO_3$ catalysts showed the maximum sensitivity of 70 in ammonia gas concentration of 160 ppm at a working temperature of $300^{\circ}C$. The sensor which is aged at $330^{\circ}C$ for 72hrs in oxygen ambient exhibited tourer sensitivity of 57, but more stable properties, excellent linearity.

• Journal of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.54-61
• /
• 1984

The species and equilibrium of molybdate and tungstate have been investigated from the elution behaviors of those in various concentrations of nitric acid and the UV spectra obtained at the various Z values. In higher concentrations than 0.05M nitric acid, the nitarte complex species of $MoO_2(NO_3)_2$ seems to form from the $MoO_2^{2+}$ ions formed by the following equation: $Mo_8O_{26}^{4-} + 20H^+$ ${\rightleftharpoons}$ $8MoO_2^{2+}$ + $10H_2O$. In the case of tungstate, the elution behaviors of tungstate in nitric acid medium are similar to those of perchloric acid, so we think the equilibrium of tungstate existed in perchloric acid could be also existed in nitric acid. These elution behaviors of tungstate are compared with the UV spectra obtained at the various Z values.

• Bulletin of the Korean Chemical Society
• /
• v.2 no.2
• /
• pp.37-41
• /
• 1981

The elution behaviors of molybdate and tungstate through anion exchange column have been investigated in the various concentration of hydrochloric and perchloric acid. A discussion is made to evaluate the existing these equilibrium and constant according to acidity. In both acids of 0.01-2.0 M concentration range, the existing equilibrium for molybdate and its constant calculated at $20^{\circ}C$ is $10^{18.9}$ for $Mo_8O_2^{4-} + 20H^+ {\rightleftharpoons} 8MoO_2^{2+} + 10H_2O$. In the 3-3.5 M hydrochloric acid it is 0.16 for $MoO_2Cl_2 + Cl^- {\rightleftharpoons} MoO_2Cl^{3-}$ and for the case of tungstate, in the both acids of 0.01-1.0 M concentration range $10^{6.6}$ for $W_{12}O_{39}^{6-} + 6H^+ {\rightleftharpoons} 12WO_3{\cdot}3H_2O$. In higher concentration than 1.0 M both acids the following equilibrium seems to be existed. $12WO_3{\cdot}3H_2O {\rightleftharpoons} 12WO_3 + 3H_2O$

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.314-320
• /
• 2014

$La_{2-x}(MoO_4)_3:Er^{3+}/Yb^{3+}$ particles with doping concentrations of $Er^{3+}$ and $Yb^{3+}$ ($x=Er^{3+}+Yb^{3+}$, $Er^{3+}$=0.05, 0.1, 0.2 and $Yb^{3+}$ = 0.2, 0.45) were successfully prepared by the microwave-modified sol-gel method, and the upconversion photoluminescence properties were investigated. Well-crystallized particles, formed after heat-treatment at $900^{\circ}C$ for 16 h, showed a fine and homogeneous morphology with particle sizes of $2-5{\mu}m$. Under excitation at 980 nm, $La_{1.7}(MoO_4)_3:Er_{0.1}Yb_{0.2}$ and $La_{1.5}(MoO_4)_3:Er_{0.05}Yb_{0.45}$ particles exhibited a strong 525 nm emission band, a weak 550 nm emission band in the green region, and a very weak 655 nm emission band in the red region. The Raman spectra of the doped particles indicated the presence of strong peaks at higher frequencies of 752, 846, 922, 1358 and $1435cm^{-1}$ and lower frequency of $314cm^{-1}$ induced by the disorder of the $[MoO_4]^{2-}$ groups with the incorporation of the $Er^{3+}$ and $Yb^{3+}$ elements into the crystal lattice or by a new phase formation.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.559-564
• /
• 2011

In order to investigate the behavior of $SiO_2$ in the molybdenum silicide powders, crystal structure of these powders was measured by XRD, in addition, surface composition and surface phase (or chemical states) and microstructure were analysed by XPS and TEM, respectively. Mo-silicide powders containing $SiO_2$ were synthesized by SHS (Self-Propagating High-Temperature Synthesis) technique. In XRD result, according to increase of $SiO_2$ contents, the crystal structure for synthesized $MoSi_2$ powders was still typical $MoSi_2$ bct without any other phases. By XPS analysis, the surface of Mo and Si source powders was covered with $MoO_3$ and $SiO_2$, respectively, and the surface of synthesized $MoSi_2$ powder was also covered with $MoO_3$ and $SiO_2$, which were stable oxides at room temperature. However, according to increase of $SiO_2$ addition, $MoSi_2$ phase in XPS spectra decreased and $SiO_2$ phase increased relatively in synthesized $MoSi_2$ powders. From the results by XPS and XRD, we found that the existent $SiO_2$ has amorphous structure. In the microstructure, the small particulates of the synthesized products added $SiO_2$ agglomerated together to form larger clusters (from ~10 nm to ~1 ${\mu}m$). From TEM, XPS, and XRD results, we found that the out layer of agglomeration of synthesized $MoSi_2$ powder is surrounded by amorphous $SiO_2$.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1403-1409
• /
• 2018

In the present study, the $SrMoO_4:Eu^{3+}$ phosphors has been synthesized through hydro-thermal co-precipitation method, and single factor and orthogonal experiment method was adopted to find optimal synthesis condition. It is interesting to note that hydro-thermal temperature is a prominent effect on the luminescent intensity of $SrMoO_4:Eu^{3+}$ red phosphor, followed by co-precipitation temperature, calcining time, and the doping amount of $Eu^{3+}$. The optimal synthesis conditions were obtained: hydro-thermal temperature is $145^{\circ}C$, co-precipitation temperature is $35^{\circ}C$, the calcining time is 2.5 h, and the doping amount of activator $Eu^{3+}$ is 25%. Subsequently, the crystalline particle size, phase composition and morphology of the synthesized phosphors were evaluated by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The results show that these phosphors possess a scheelite-type tetragonal structure, and the particle size is about $0.2{\mu}m$. Spectroscopic investigations of the synthesized phosphors are carried out with the help of photo-luminescence excitation and emission analysis. The studies reveal that $SrMoO_4:Eu^{3+}$ phosphor efficiently convert radiation of 394 nm-592 and 616 nm for red light, and the luminescence intensity of $SrMoO_4:Eu^{3+}$ phosphors is improved. $SrMoO_4:Eu^{3+}$ phosphors may be a potential application for enhancing the efficiency of white LEDs.