• 한국식품과학회지
• /
• 제23권3호
• /
• pp.375-378
• /
• 1991

방아의 단백질 함량은 부위별로 볼 때 잎에서 14.90%로 가장 높았고 꽃대에는 10.63%, 줄기에서는 3.83%로 부위별로 차이가 크게 나타났다. 지방함량은 $5.25{\sim}7.74%$의 범위로 부위별 함량이 비슷하였다. 회분은 잎과 꽃대에 각각 8.43%와 7.71%로 비슷하였으나 줄기에서는 1.42%로 현저히 낮은 함량을 나타내었다. 총 당은 잎과 꽃대에서 각각 27.53%와 14.86%으로 함유되었고, 환원당은 각각 11.80%와 2.75%의 함량으로 부위에 따라 차이를 보이었다. 지방산은 각 부위에서 총 15종이 동정되었으며 그 중 linolenic acid, palmitic acid, lauric acid, linoleic acid 등이 주된 성분으로 나타났는데, 특히 잎과 꽃대에는 linolenic acid 함량이 각각 35.45%와 52.77%로 높게 나타났다. 총 아미노산은 잎과 꽃대에서 17종이 동정되었으며 tryptophan을 제외한 7종의 필수아미노산이 분포되어 있었고, 각 아미노산 함량별로는 glutamic acid, aspartic acid, leucine 등의 순으로 높게 함유되었으며 필수아미노산의 비율이 잎과 꽃대에서 각각 37.82%와 33.49%로 나타났다. 유리아미노산은 잎에서 histidine, serine, glutamic acid, proline 및 alanine 등의 순으로 높게 함유되었으며 꽃대에는 serine, histidine, proline, glutamic acid, arginine 및 aspartic acid 등의 순으로 나타났다. 무기질의 조성은 Ca과 Fe를 제외한 Zn, K, Na, Mg, Cu 및 Mn 등이 줄기에 비하여 잎과 꽃대에서 높은 함량을 나타내었다.

• 전기화학회지
• /
• 제4권2호
• /
• pp.58-64
• /
• 2001

기체/전해질/LSM $(La_{0.85}Sr_{0.15}MnO_3)$ 공기극이 만나는 삼상계면 (triple phase boundary) 주위에 YSZ ($8mol\%$ yttria stabilized zirconia) 코팅막 (coating film) 을 형성하여 추가로 삼상계면을 크게 늘린 새로운 전극 미세구조를 갖는 복합 공기극 (composite cathode) 을 개발하였다. 이 복합 공기극을 전해질 두께가 약 $30{\mu}m$인 연료극 (anode)v 지지체 위에 형성하여 $700\~800{\circ}C$의 온도에서 전류전압 특성 및 교류 임피던스 분석을 실시하였다. $800^{\circ}$, 공기 및 수소 조건에서 교류 임피던스 분석 결과 1000Hz주파수 영역을 대변하는 저항성분 R1은 연료극 분극 저항에 해당하였고 100Hz주파수 영역의 저항성분 R2는 공기극 분극 저항 성분, 그리고 10Hz이하 영역의 저항성분 R3는 전극을 통한 기체확산 저항성분으로 특히, 작동 조건인 공기 및 수소 분위기에서는 연료극 쪽 반응기체에 의한 기체확산 저항 성분임을 알 수 있었다. 전지성능 측정 결과 이 복합 공기극을 장착한 전지는 $800^{\circ}C$, 공기 및 산소 조건에서 각각 $0.55W/cm^2$ $1W/cm^2$의 높은 전지성능을 나타내었다. 전류전압 곡선은 기울기가 다른 두 구간으로 구분되었으며, 낮은 전류밀도 하에서 보이는 급격한 전압감소 구간은 공기극 분극저항이 주된 성능 저하의 원인인 반면, 높은 전류밀도 하에서 나타나는 완만한 전압 감소 구간은 전해질에 관련된 분극저항이 주된 성능 저하의 원인이었다.

• 한국토양비료학회지
• /
• 제32권2호
• /
• pp.123-131
• /
• 1999

우리나라의 주요 조미채소인 고추, 마늘 및 양파 주산지 토양의 물리화학적 특성 및 화학성분함량을 조사하여 토양관리 및 시비 기준설정의 기초자료로 활용하기 위하여 고추(132개지점), 마늘(59개지점) 및 양파(24개지점) 주산지 총 215개 지점의 근권토양을 채취하여 분석하였다. 우리나라 고추, 마늘 및 양파 주산지 토양은 사양토(SL)와 양토(L)가 전체의 68% 이상을 차지하였으며, 토성별 빈도분포는 양토(L. 35.4%) > 사양토(SL,31.6%) > 미사질양토(SiL, 14.9%) > 식양토(CL.7.0%)의 순이었다. 토양 pH는 마늘 및 양파재배지 토양은 평균 6.0 이상이었으나 고추재배지 토양은 5.5로서 낮았으며, 전체조사지역의 58.7%인 126개 지점이 6.0 이하였으며, pH 5.0 이하인 지점도 전체의 21.4%인 46개 지점이었으며, 7.1 이상인 지역은 약 10.3%인 22개 지점이었다. 토양유기물 함량은 전반적으로 $20{\sim}30g\;kg^{-1}$ 수준이H으며 양파재배지 토양에서 다소 높게 나타났다. 유효 $P_2O_5$는 $719{\sim}746mg\;kg^{-1}$ 범위로서 작물간에 큰 차이는 없었으며, 빈도분포는 전체 조사지역중 62.8%가 유효 $P_2O_5$ $600mg\;kg^{-1}$ 이상으로서 기준치를 초과하였으며 $1,000mg\;kg^{-1}$ 이상도 전체의 22.3%를 차지하였다. 치환성 양이온인 K 및 Ca 함량은 마늘(1.27 및 $9.11cmol\;kg^{-1}$) 및 양파(1.20 및 $8.39cmol\;kg^{-1}$)재배지토양이 고추재배지 토양(0.96 및 $5.87cmol\;kg^{-1}$)에 비하여 높았으며, Mg 함량은 마늘재배지 토양이 $2.17cmol\;kg^{-1}$으로서 가장 높았으며, 고추 및 양파재배지토양은 각각 약 1.51 및 $1.80cmol\;kg^{-1}$으로 마늘재배지 토양에 비하여 낮게 나타났으나 치환성 양이온인K, Mg 및 Ca모두 경작지 토양의 적정수준 이상으로 함유되어 있었다. 그리고 미량원소는 Fe는 $54.3{\sim}60.1mg\;kg^{-1}$ 범위, Mn은 $31.3{\sim}42.3mg\;kg^{-1}$ 범위 Cu및 Zn은 각각 1.7~2.3 및 $4.8{\sim}5.5mg\;kg^{-1}$ 범위였다.

• 대한치과보철학회지
• /
• 제36권1호
• /
• pp.166-182
• /
• 1998

The purposes of this study are to evaluate the Korean mandibular dental arch and classify the mandibular dental arch shape and size based on the incisal angle, canine angle, inter second molar width and height. In this study the mandibular study models were fabricated using irreversible hydrocolloid impression material from 225 volunteers with a mean age 23.62 (range 19-29). And the study models were measured with 3-dimensional measuring device and the mandibular dental arch was classified by means of K-means clustering method and visual inspection, then obtained data were analyzed with t-test for the statistical analysis. The results were as follows ; 1. The average canine height was 5.19mm(s.d. 1.17) in both sex, 5.34mm in male, and 4.95mnm in female. And the sexual difference was significant($0). 2. The average second molar height was 39.81mm(s.d. 2.44) in both sex, 40.19mm in male, and 39.21mm in female. And the sexual difference was significant($0). 3. The average inter-canine width was 27.16mm(s.d. 1.78) in both sex, 27.41mm in male, and 26.77mm in female. And the sexual difference was significant($0). 4. The average inter-first molar width was 46.93mm(s.d. 2.67) in both sex, 47.72mm in male, and 45.7mm in female. And the sexual difference was significant($0). 5. The inter-second molar width was average 56.09mm(s.d. 3.01) in both sex, 57.24mm in male, and 54.32mn in woma. And the sexual difference was significant($0). 6. The arch form was classified into three shapes based on the incisal and canine angle. V-shape showed $124.88^{\circ}$ of incisal angle and $141.64^{\circ}$ of canine angle, U-shape showed $152.76^{\circ}\;and\;125.35^{\circ}$, and O-shape showed $138.03^{\circ}\;and \;33.66^{\circ}$ respectively. Each shape distribution was that the V-shape was 14.2%, the U-Shape was 14.7%, and the O-shape was 71.1% of the 225 study models. 7. It was thought that the use of second molar width is more reasonable than height for classifying the dental arch size. The arch size was classified into four sizes based on the second molar width. Size 1 showed range of 42.24-48.23mm, size 2 showed 48.24-54.23mm, size 3 showed 54.24-60.23mm, and size 4 showed 60.24-66.23mm respectively. Each arch size distribution was that the size 1 was 1.3%, the size 2 was 27.1%, the size 3 was 63.6%, and the size 4 was 8.0% of the 225 study models.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.345-350
• /
• 2018

Nanomaterials have considerable potential to solve several key challenges in various electrochemical devices, such as fuel cells. However, the use of nanoparticles in high-temperature devices like solid-oxide fuel cells (SOFCs) is considered problematic because the nanostructured surface typically prepared by deposition techniques may easily coarsen and thus deactivate, especially when used in high-temperature redox conditions. Herein we report the synthesis of a self-regenerated Pd metal nanoparticle on the perovskite oxide anode surface for SOFCs that exhibit self-recovery from their degradation in redox cycle and $CH_4$ fuel running. Using Pd-doped perovskite, $La(Sr)Fe(Mn,Pd)O_3$, as an anode, fairly high maximum power densities of 0.5 and $0.2cm^{-2}$ were achieved at 1,073 K in $H_2$ and $CH_4$ respectively, despite using thick electrolyte support-type cell. Long-term stability was also examined in $CH_4$ and the redox cycle, when the anode is exposed to air. The cell with Pd-doped perovskite anode had high tolerance against re-oxidation and recovered the behavior of anodic performance from catalytic degradation. This recovery of power density can be explained by the surface segregation of Pd nanoparticles, which are self-recovered via re-oxidation and reduction. In addition, self-recovery of the anode by oxidation treatment was confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM).

• 한국환경과학회지
• /
• 제24권2호
• /
• pp.175-188
• /
• 2015

For 63 soil series distributed in Jeju Island, natural uncultivated soils in each soil series were collected, and their physicochemical properties and their concentrations of 19 heavy metals including 8 heavy metals which are regulated by Korean Soil Environment Conservation Law, were analyzed. Moreover, the correlations between physicochemical properties and heavy metal concentrations, and between heavy metal concentrations were analyzed. The heavy metals distributed in the higher concentrations and the lower concentrations with arithmetric mean value, were Mn(730 mg/kg) and Ba(493 mg/kg), and Hg(0.146 mg/kg) and Tl(0.096 mg/kg), respectively. The correlations between pH($H_2O$) and heavy metals(Hg, Ni, Co, Se), between pH(NaF) and heavy metals(Hg, Ba, Se, Tl), and between organic matter content and heavy metals(Hg, Tl) were significant at the 0.01 level. From the correlations between heavy metal concentrations, there were 22 where there were significant at the 0.01 level and they showed positive correlation. Among those, the heavy metals showing the correlation higher than r=0.5, were Sb-V(0.878), Mo-Sn(0.867), Co-V(0.654), Co-Sb(0.648), Be-Sn(0.546), and Sn-Tl(0.528).

• Journal of Welding and Joining
• /
• 제13권3호
• /
• pp.134-146
• /
• 1995

Aluminium nitride(AlN) is currently under investigation as potential candidate for replacing alumium oxide(Al$_{2}$ $O_{3}$) as a substrate material for for electronic circuit packaging. Brazing of aluminium nitride(AlN) to Cu with Ag base active alloy containing Ti has been investigated in vacuum. Binary Ag$_{98}$ $Ti_{2}$(AT) and ternary At-1wt.%Al(ATA), AT-1wt.%Ni(ATN), AT-1wt.% Mn(ATM) alloys showed good wettability to AlN and led to the development of strong bond between brate alloy and AlN ceramic. The reaction between AlN and the melted brazing alloys resulted in the formation of continuous TiN layers at the AlN side iterface. This reaction layer was found to increase by increase by increasing brazing time and temperature for all filler metals. The bond strength, measured by 4-point bend test, was increased with bonding temperature and showed maximum value and then decreased with temperature. It might be concluded that optimum thickness of the reaction layer was existed for maximum bond strength. The joint brazed at 900.deg.C for 1800sec using binary AT alloy fractured at the maximum load of 35kgf which is the highest value measured in this work. The failure of this joint was initiated at the interface between AlN and TiN layer and then proceeded alternately through the interior of the reaction layer and AlN ceramic itself.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권1호
• /
• pp.33-38
• /
• 2004

This study was aimed at testing the gene expression of antioxidant enzymes and apoptosis genes for in vitro culture in porcine embryos produced by in vitro maturation/in vitro fertilization (IVM/IVF). Pocine preimplantation embryos obtainted from IVM/IVF can be successfully culture in vitro, but they are delayed or stop to develop at specific developmental stage. Many factors such as reactive oxygen species and apoptosis in an IVM/IVF system followed by in vitro culture influence the rate of production of viable blastocysts. Porcine embryos derived from IVM/IVF were cultured in the atmosphere of 5% $CO_2$ and 20% $O_2$ at $38.5^{\circ}C$ in NCSU23 medium. The patterns of gene expression for antioxidant enzymes and apoptosis genes during in vitro culture in pocine IVM/IVF embryos were examined by the modified semi-quantitative single cell reverse transcriptase-polymerase chain reaction (RT-PCR). Porcine embryos produced by in vitro procedures were expressed mRNAs for CuZn-SOD, GAPDH and GPX, whereas transcripts for Mn-SOD and catalase were not detected at any developmental stages. Expression of caspase-3 mRNA was detected at 2 cell, 8 cell 16 cell and blastocyst, but p53 mRNA was not detected at any stages. The fas transcripts was only detected in blastocyst stage. These results suggest that various antioxidant enzymes and apoptosis genes play crucial roles in vitro culture of porcine IVM/IVF embryos.

• KSBB Journal
• /
• 제25권1호
• /
• pp.79-84
• /
• 2010

In the present study, we isolated a new bacterial strain producing invertase (EC 3.2.1.26) and determined optimized culture condition in flask culture. The strain was identified as Bacilus flexus determined by the 16S rDNA sequencing method. The invertase was produced only in the sucrose medium as the sole carbon source. Potassium nitrate was an adequate nitrogen source for enzyme production, whereas meat peptone showed the highest bacterial growth. Enzyme production was increased about 2-fold when $MgSO_4\cdot7H_2O$ was supplemented to the growth media. The optimum temperature was found to be $30^{\circ}C$ for both enzyme production and bacterial growth. Invertase exhibited pH optima in the range 5.0-6.0 and have a temperature optimum at $40^{\circ}C$, similarly to other invertases found from different microbial sources. Several mineral ions (K and Fe) stimulated the invertase activity, whereas some bioelements (Ag, Mg, and Mn) inhibited enzyme activity. Under the optimized culture condition, the maximum enzyme production (over 250 units/mL) was achieved at 20 h. To the best of our knowledge, this is the first time to report on invertase production by Bacilus flexus.

• 한국식품조리과학회지
• /
• 제16권5호
• /
• pp.425-430
• /
• 2000

우리 나라에서 재배하여 생산한 식용 지하 부위 채소들(감자, 고구마, 당근, 무, 양파, 마늘)의 생산지역에 따른 무기질 성분의 차이와 중금속 함유 여부를 알아보기 위하여 그 성분을 분석하였다. 먼저 microwave digestion oven에서 시료를 HNO$_3$ 4ml(65%)과 $H_2O$$_2$1ml(30%)로 용액 화하여 hot plate에서 시료를 1 ml까지 휘발시켜서 1% HNO$_3$로 희석한 후 ICP-AES로 무기질 성분을 정성, 정량 분석하였다. 모든 시료에서 가장 많이 분석된 무기성분은 K이었으며 각각의 성분 함유도는 모든 시료마다 다르게 나타났다. 감자는 다른 식용지하 부위 채소에 비해 Na와 Fe의 함량이 상대적으로 낮게 분석되었는데 K, P, Mg순의 함량을 보였고 K은 김포 지방산이, Ca는 삼척 지방산이 많이 함유한 것으로 조사되었다. 고구마는 분석한 거의 모든 지역에서 Ca 함량이 감자의 두 배 이상으로 높게 나타났다. 당근은 Na 함량이 다른 채소에 비해 높았으며 특히 진부 지방산이 많이 함유하고 있었다. 무는 K, Ca, P, Mg 순으로 함량이 높았는데 특히 양구 지방산이 높게 나타났다. 또한 Ca의 함량이 높았는데 감자의 5-8배였고, 다른 지하 부위 채소와 비교하여도 2-3배 이상이었다. 양파는 K, P Ca의 함량이 타 채소에 비해 낮게 분석되었었는데 지역별 차이는 많지 않았으며 문경 지방산이 Ca의 함량이 높았다. 마늘의 경우 K의 함량은 의성 지방산이, Ca의 함량은 서산 지방산이 높았으며 K과 P의 함량이 상대적으로 높았다.