• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.356-360
• /
• 2002

The piezoelectric properties of $0.05Pb(Al_{0.5}Nb_{0.5})O_3-0.95Pb(Zr_{0.52}Ti_{0.48})O_3+0.7wt%Nb_2O_5+o.5wt%MnO_2$ ceramics with the additive of BaCO$_3$were investigated. As the addition of BaCO$_3$increased from 0 to 0.4 wt%, the dielectric constant ($\epsilon^T _{33}$), piezoelectric constant ($d_33$), electromechanical coupling factor ($k_p$), and mechanical quality factor ($Q_m$) increased, while the dielectric loss ($tan\delta$) decreased. The highest piezoelectric and dielectric properties were observed at $1200^{\circ}C$ of the sintered temperature with 0.4 wt% of $BaCO_3$, and the properties of $d_33$, $k_p$, and $Q_m$ were 339 pC/N, 60% and 1754, respectively.

• 한국표면공학회지
• /
• 제43권2호
• /
• pp.73-79
• /
• 2010

A chromium-free conversion coating for AZ31 magnesium alloy has been obtained by using a permanganatephosphate solution, which has been developed with acid pickling. Examination have been carried out on the conversion coatings for morphology, composition and corrosion resistance. The morphology of the conversion-coated layer was observed using optical microscope and SEM. It was shown that the conversion coatings are relatively uniform and continuous, with thickness 1.8 to 2.7 ${\mu}m$. The chemical composition of conversion coating was mainly consisted of Mg, O, P, K, Al and Mn by EDS analysis. It was found that the corrosion resistance of the AZ31 magnesium alloy has been improved by the permanganate-phosphate conversion treatment from electrochemical polarization.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권9호
• /
• pp.4788-4813
• /
• 2019

In this paper, we introduce concepts of optimal and near optimal secret data hiding schemes. We present a new digital image steganography approach based on the Galois field $GF(p^m)$ using graph and automata to design the data hiding scheme of the general form ($k,N,{\lfloor}{\log}_2p^{mn}{\rfloor}$) for binary, gray and palette images with the given assumptions, where k, m, n, N are positive integers and p is prime, show the sufficient conditions for the existence and prove the existence of some optimal and near optimal secret data hiding schemes. These results are derived from the concept of the maximal secret data ratio of embedded bits, the module approach and the fastest optimal parity assignment method proposed by Huy et al. in 2011 and 2013. An application of the schemes to the process of hiding a finite sequence of secret data in an image is also considered. Security analyses and experimental results confirm that our approach can create steganographic schemes which achieve high efficiency in embedding capacity, visual quality, speed as well as security, which are key properties of steganography.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1370-1376
• /
• 2018

The electronic structures, magnetic properties and half-metallicity in $Zr_2RuZ$ (Z = Ga, In, Tl, Ge, Sn, and Pb) alloys with $AlCu_2Mn-$ and $CuHg_2Ti$-type structures were investigated using first-principles density functional theory (DFT) calculations. The calculations showed that $Zr_2RuIn$, $Zr_2RuTl$, $Zr_2RuSn$, and $Zr_2RuPb$ compounds with $CuHg_2Ti$-type structures were half-metallic ferromagnets with half-metallic band gaps of 0.18, 0.24, 0.22, and 0.27 eV, respectively. The half-metallicity originated from d-d and covalent hybridizations between the transition metals Zr and Ru. The total magnetic moments of the $Zr_2RuZ$ (Z = In, Tl, Sn, and Pb) compounds with $CuHg_2Ti$-type structures were integer values of $1{\mu}B$ and $2{\mu}B$, which is in agreement with Slater-Pauling rule ($M_{tot}=Z_{tot}-18$). Among these compounds, $Zr_2RuIn$ and $Zr_2RuTl$ were half-metals over relatively wide regions of the lattice constants, indicating that these two new Heusler alloys are ideal candidates for use in spintronic devices.

• 소성∙가공
• /
• 제32권3호
• /
• pp.160-165
• /
• 2023

As the supply of eco-friendly vehicles increases, the application rate of hot stamping components is rising to reduce vehicle weight and improve safety. Although Al-Si coated steel sheets are commonly used in hot stamping processes, their manufacturing costs are elevated due to process patents and royalties. Various hot stamping studies have been conducted to reduce these production costs. In this study, we derived a process control method for suppressing the oxide layer of hot stamping parts using uncoated boron steel sheets. Firstly, hat-shaped parts were hot stamped under atmospheric conditions to analyze the tendency of oxide layer formation by location. Then, the Gleeble system was used to observe oxide layer formation based on oxygen content under various atmospheric conditions. Finally, the oxide layer thickness was quantitatively measured using SEM images.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권3호
• /
• pp.5-8
• /
• 2008

On highly-textured IBAD-MgO templates, we have tried to find proper buffer layers among various candidate materials, including $LaMnO_3$ (LMO), $La_2Zr_2O_7$ (LAO), $LaAlO_3$ (LAO), $LaGaO_3$ (LGO), $NdGaO_3$ (NGO), and $BaZrO_3$ (BZO). All buffer layers were deposited on the IBAD-MgO templates by KrF pulsed laser deposition(PLD). LAO layer showed an armorphous phase. LZO, LGO, and NGO layers showed polycrystalline growth. Only LMO and BZO layers exhibited c-axis oriented biaxially textured films. Optimally processed LMO buffer layer at deposition temperature of $750^{\circ}C$ and $PO_2$ of 100mTorr exhibited ${\triangle}{\phi}$ value of ${\sim}-5.2^{\circ}$ and RMS roughness of 5.6nm. Interestingly, BZO buffer layers with ${\triangle}{\phi}$ values of ${\sim}-6^{\circ}$ could be routinely produced over a wide PLD processing condition.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.162-162
• /
• 2022

This study was carried out to investigate the effects of nitrogen, phosphorus, potassium (three main macro elements of fertilizer) on growth, yield and mineral contents of Platycodon grandiflorum for. duplux and to obtain the basic data of the proper fertilizer application for increasing the yield of P. grandiflorum for. duplux. Plant height showed significantly good results in all fertilization treatments compared to non fertilizer group (the control, T0), and in particular, the highest was 85.7 cm in the complete group (T4). Chlorophyll content showed a high amount in the range of 20.7 to 23.8 against all fertilization treatment groups, except for non fertilizer (T0) and non nitrogen (T1). The fresh weight of roots were higher quantity than other fertilization treatments in the complete group 55.8 g (T4). The mineral nutrient content ofNa, Mg, Cu and Al of the roots of P. grandiflorum for. duplux from T1 group showed the lowest amount compared to other groups. In addition, P from T2 group, Mn from T3 group and Ca, Fe, Zn from T4 group also exhibited the lowest mineral content compared to other groups respectively.

• 자원환경지질
• /
• 제42권3호
• /
• pp.177-193
• /
• 2009

삼광광상은 선캠브리아기 경기육괴의 화강편마암내에 발달된 단열대(NE, NW)를 따라 충진한 8개의 괴상맥으로 구성된 중열수 석영맥광상이다. 이 광상의 광화작용은 여러번의 단열작용에 의해 형성된 두시기의 석영+방해석시기(광화I시기)와 방해석시기(광화II시기)로 구성된다. 광화I시기의 열수작용에 의한 변질작용은 견운모화, 녹니석화, 탄산염화, 황철석화, 규화, 및 점토화작용등이 관찰되며 견운모대는 석영맥과 접촉한 부분에서 녹니석대는 석영맥으로부터 멀어짐에 따라 관찰된다. 견운모대의 모암변질광물은 대부분이 견운모 및 석영이며 일부 일라이트, 탄산염광물, 녹니석으로 구성된다. 녹니석대의 모암변질광물은 주로 녹니석, 석영과 소량 견운모, 탄산염광물 및 녹염석으로 구성된다. 견운모의 Fe/(Fe+Mg) 값은 0.45${\sim}$0.50(0.48$\pm$0.02)이며 백운모-펜자이트족에 해당되고 녹니석의 Fe/(Fe+Mg) 값은 0.74${\sim}$0.81(0.77$\pm$0.03)이고 대부분 브런스비자이트에 해당된다. 견운모와 녹니석에 대한 $Al_{IV}$-FE/(FE+Mg)의 다이어그램은 변질시 같은 광종의 견운모와 녹니석의 형성온도를 나타내는 지시자로써 유용하다. 이것은 계산된 녹니석 단종의 활동도가 $a3(Fe_5Al_2Si_3O_{10}(OH)_6$=0.0275${\sim}$0.0413, $a2(Mg_5Al_2Si_3O_{10}(OH)_6$=1.18E-10${\sim}$7.79E-7, $a1(Mg_6Si_4O_{10}(OH)_6$=4.92E-10${\sim}$9.29E-7로서 삼광광상의 녹니석은 iron-rich 녹니석으로 비교적 고온 (T>450$^{\circ}C$에서 모암과 평형상태에서 온도가 감소함에 따라 형성되었음을 알 수 있다. 모암변질시 ${\alpha}Na^+$, ${\alpha}K^+$, ${\alpha}Ca^{2+}$ 및 ${\alpha}Mg^{2+}$는 각각 ${\alpha}Na^+$=0.0476($400^{\circ}C$), 0.0863($350^{\circ}C$), ${\alpha}K^+$=0.0154($400^{\circ}C$), 0.0231($350^{\circ}C$), ${\alpha}Ca^{2+}$=2.42E-11($400^{\circ}C$), 7.07E-10($350^{\circ}C$), ${\alpha}Mg^{2+}$=1.59E-12($400^{\circ}C$), 1.77E-11($350^{\circ}C$)이며 열수용액의 pH는 5.4${\sim}$6.4($400^{\circ}C$), 5.3${\sim}$5.7($350^{\circ}C$)로서 모암변질시 열수용액는 약산성이었음을 알 수 있다. 모암변질시 이득원소(부화원소)는 $TiO_2$, $Fe_2O_3(T)$,CaO, MnO, MgO, As, Ag, Cu, Zn, Ni, Co, W, V, Br, Cs, Rb, Sc, Bi, Nb, Sb, Se, Sn 및 Lu 등이며 특히 대부분의 광상에서 Ag, As, Zn, Sc, Sb, S,$CO_2$ 등의 원소가 현저하게 증가하므로 중열수 및 천열수 금-은광상의 탐사에 지시원소로서 활용될 수 있을 것이다.

• 자원환경지질
• /
• 제41권1호
• /
• pp.63-79
• /
• 2008

울진광산 지역에 매립된 광미와 방치된 폐광석이 주변 하천에 미치는 영향을 평가하기 위해, 하천수, 침출수, 갱내수 및 지하수의 물리화학적인 특성을 파악하였다. 또한 폐광석 내 황화광물의 풍화 특징을 파악하기 위한 광물학적 연구와, 토양 내 미량원소의 분산 특성을 파악하기 위한 총함량 분석을 수행하였다. 매립된 광미에서 발생하는 침출수의 pH의 범위는 $2.9{\sim}6.0$이며, EC는 $99{\sim}3990{\mu}S/cm$로 주원소(최대 492 mg/l Ca; 83.8 mg/l Mg; 45.2 mg/l Na; 44.7 mg/l K; 50.8 mg/l Si) 및 미량원소(최대 $826,060{\mu}g/l$ Fe; $131,230{\mu}g/l$ Mn; $333,600{\mu}g/l$ Al; $61,340{\mu}g/l$ Zn; $2,530{\mu}g/l$ Cu; $573{\mu}g/l$ Cd; $476{\mu}g/l$ Pb)함량이 높게 나타났다. 하천수의 물리화학적 특성은 침출수와 지류의 유입에 따른 공간적 변화와 강수량에 따른 시기별 변화가 관찰되었다. 침출수의 유입으로 하천수의 용존 이온의 농도는 증가하지만 오염되지 않은 지류와의 혼합에 의한 희석작용으로 하류로 갈수록 감소한다. 건기인 2월에는 침출수 유입량이 줄어 하천수의 용존 이온 함량이 우기보다 낮다. 하지만 건기에는 지류 및 하천수의 유량 감소로 인하여 희석작용이 상대적으로 미약하여 우기에 비해 오염 확산 범위가 더 넓은 것으로 확인되었다. 배경치와 비교한 울진광산 주변의 토양시료의 중금속 농집 순서는 망간>철>납>구리>아연으로 나타났다. 울진광산에서 산출되는 황화광물은 자류철석과 섬아연석이 주를 이루며, 방연석과 황동석이 수반된다. 이 중 자류철석이 가장 풍화가 빠르게 진행되었으며, 광물 내부에 발달된 균열부와 입자 가장 자리를 따라 내부로 산화가 진행되어 철수산화광물이 생성되며, 소량의 Zn을 흡착하는 것으로 밝혀졌다.

• 한국대기환경학회지
• /
• 제29권3호
• /
• pp.325-337
• /
• 2013

The size-fractionated aerosol samples have been collected at Gosan Site of Jeju Island during the spring season of 2010, in order to examine the chemical composition characteristics of the Asian Dust and Non-Asian Dust particles. The concentrations of ${HCO_3}^-$, Al, and nss-$Ca^{2+}$ in $PM_{10}$ had tremendously increased during the heavy Asian Dust (March 20, 2010). The concentration ratios of Asian Dust to Non-Asian Dust for the soil species (nss-$Ca^{2+}$, ${HCO_3}^-$, Al, Fe, Ti, Mn) were 12.2~30.7, meanwhile those for the anthropogenic species (nss-${SO_4}^{2-}$, ${NH_4}^+$, ${NO_3}^-$, $K^+$, Zn, Pb, and Cu) were 2.9~7.8. During the heavy Asian Dust event, the concentration increase of ${NO_3}^-$ in $PM_{2.5}$ were much more apparent than those of nss-${SO_4}^{2-}$ and ${NH_4}^+$, and the soil species (nss-$Ca^{2+}$ and ${HCO_3}^-$) showed much higher concentration increase. The neutralization factor of $NH_3$ was higher than that of $CaCO_3$. However, the neutralization factor of $CaCO_3$ in $PM_{10}$ was exceptionally high during the heavy Asian Dust, showing the evidence of heavy migration of soil particles. From the study for size fractionated particles, it was found that nss-${SO_4}^{2-}$ and ${NH_4}^+$ were mostly distributed in fine particle mode, on the other hand, ${NO_3}^-$ existed evenly in both fine and coarse particle modes, and the soil species (nss-$Ca^{2+}$, Al, Fe, etc.) were mainly in the latter mode. During the heavy Asian Dust, in particular, the concentrations of ${NH_4}^+$, nss-${SO_4}^{2-}$, $K^+$, Zn, and Pb had increased in coarse particle mode as well.