• Journal of Environmental Science International
• /
• v.26 no.11
• /
• pp.1297-1306
• /
• 2017

This study identified physical characteristics and aerosol particle sources of $PM_{10}$ and $PM_{2.5}$ in the industrial complex of Busan Metropolitan City, Korea. Samples of $PM_{10}$, $PM_{2.5}$ and also soil, were collected in several areas during the year of 2012 to investigate elemental composition. A URG cyclone sampler was used for collection. The samples were collected according to each experimental condition, and the analysis method of SEM-EDX was used to determine the concentration of each metallic element. The comparative analysis indicated that their mass concentration ranged from 1% to 3%. The elements in the industrial region that were above 10% were Si, Al, Fe, and Ca. Those below 5% were Na, Mg, and S. The remaining elements (1% of total mass) consisted of elements such as Ni, Co, Br and Pb. Finally, a statistical tool was applied to the elemental results to identify each source for the industrial region. From a principal components analysis (SPSS, Ver 20.0) performed to analyze the possible sources of $PM_{10}$ in the industrial region, five main factors were determined. Factor 1 (Si, Al), which accounted for 15.8% of the total variance, was mostly affected by soil and dust from manufacturing facilities nearby, Factors 2 (Cu, Ni), 3 (Zn, Pb), and 4 (Mn, Fe), which also accounted for some of variance, were mainly related to iron, non-ferrous metals, and other industrial manufacturing sources. Also, five factors determined to access possible sources of $PM_{2.5}$, Factor 1 (Na, S), accounted for 13.5% of the total variance and was affected by sea-salt particles and fuel incineration sources, and Factors 2 (Ti, Mn), 3 (Pb, Cl), 4 (K, Al) also explained significant proportions of the variance. Theses factors mean that the $PM_{2.5}$ emission sources may be considered as sources of incineration, and metals, and non-ferrous manufacturing industries.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.555-569
• /
• 2004

Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn＇t pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.

• Applied Biological Chemistry
• /
• v.42 no.2
• /
• pp.134-139
• /
• 1999

The characteristics of anthocyanin pigments extracted from cherry(Prunus serrulata L. var. spontanea Max. Wils.) were investigated at the various conditions, such as light, temperature, organic acid, metal ion and pH. The pigments were fairly stable under the sunlight during the 20 days storage period at room temperature. The pigments covered with the Al-foil, as well as red, blue, green and yellow films, were very stable at pH 2.5. The high thermal stability (over the 64% at $115^{\circ}C$, 30 min) of the pigments in the dark at pH 2.5 was also found. In the presence of organic acid, the hyperchromic effect of red color was greatly increased in the dark at $25^{\circ}C$. Addition of metal ion, such as $Na^+,\;K^+,\;Mg^{2+},\;Ca^{2+}\;and\;Mn^{2+}$, was contributed on the stability in color at pH 2.5 throughout 20 days storage period in the dark at $25^{\circ}C$. However, $Cu^{2+}\;and\;Fe^{3+}$ caused the rapidly degradation of pigments, and $Al^{3+}$ converted red color to blueish violet. The hyperchromic effect of the red color increased, as pH decreased. Therefore, these results indicated that cherry anthocyanin pigments might be used as the potential sources of natural red colorant for foods.

• Economic and Environmental Geology
• /
• v.25 no.1
• /
• pp.27-39
• /
• 1992

Several pyrophyllite deposits occur around the Milyang area where Cretaceous andesitic rocks and spatially related granitic rocks are widely distributed. Pyrophyllite ores consist mainly of pyrophyllite, and quartz with small amount of sericite, pyrite, dumortierite, and diaspore. The andesitic rocks and spatially related granitic rocks in this area suggest that they could be formed from the same series of a calc-alkaline magma series. The contents of $SiO_2$, $Al_2O_3$, LOI(loss on ignition) are enriched, and $K_2O$, $Na_2O$, CaO, MgO, $Fe_2O_3$ are depleted in altered andesitic rocks and ores. Enrichment of As, Cr, Sr, V, Sb and depletion of Ba, Cs, Ni, Rb, U, Y, Co, Sc, Zn are characteristic during mineralization. The pyrophyllite ores can be discriminated from the altered-and unaltered wall-rocks by an increasing of $(La/Lu)_{cn}$ from 4.18~22.13 to 8.98~55.05. In R-mode cluster analysis, Yb-Lu-Y, La-Ce-Hf-Th-U-Zr, $TiO_2-V-Al_2O_3$, Sm-Eu, $CaO-Na_2O-MnO$, Cu-Zn-Ag, $K_2O-Rb$ are closely correlated. In the discriminant analysis of multi-element data, $P_2O_5$, As, Cr and $Fe_2O_3$, Sr are helpful to identify the ores from the unaltered-and altered wall-rocks. In the factor analysis, the factors of alteration of andesitic rocks and ore mineralization were extracted. In the change of ions per unit volume, $SiO_2$, $Al^{3+}$ and LOI are enriched and $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, $Mn^{2+}$ and $Fe^{3+}$ are depleted during the alteration processes. The Milyang and the Sungjin pyrophyllite deposits could be mineralized by hydrothermal alteration in a geochemical condition of low activity ratio of alkaline ions to hydrogen ion with reference to spatially related granitic rocks.

• Analytical Science and Technology
• /
• v.13 no.6
• /
• pp.766-774
• /
• 2000

The major and trace constituents of Mongolian chromite were analyzed by ICP-AES. The dissolution procedures, mixed acid ($HClO_4+H_3PO_4$) digestion and fusion with $Na_2O_2$ flux, have been studied to dissolve the chromite. The optimum dissolution method was found to be a fusion with $Na_2O_2$ flux. The effect of large amount of Na on major and trace constituents was examined when these elements were determined by ICP-AES. There was no effect on major elements at a concentration of Na 250 mg/L solution. The emission intensity of trace constituents containing Na 1,250 mg/L decreased to 1.0-5.2% according to elements and wavelengths. The result of this method was compared with that of neutron activation analysis (NAA) to confirm the accuracy of this procedure. The results between two methods were in a good agreement within less than 5% for $Al_2O_3$, $Cr_2O_3$, MgO and -20 to 8% for Co, Mn, V, Zn, respectively.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.2 s.48
• /
• pp.59-72
• /
• 2007

Kilauea volcano located in the southern part of Hawaii island chains has been formed by continuous and sporadic eruption activities from 16 century to September of 1982. Kilauea volcano was investigated from collecting the samples of basalt to identify the geochemical characteristics of the lavas. Olivine, clinopyroxene, plagioclase, and opaque minerals with glass groundmass are observed. Clinopyroxene formed glomerophopyritic texture with plagioclase and zoning texture was observed in some of plagioclase phenocrysts. Major elements such as $K_2O$, $P_2O_5$, $TiO_2$ increased with respect to MgO. $Al_2O_3$ and CaO show the kink on Marker diagram due to the crystal fractionation of plagioclase and clinopyroxene with plagioclase respectively. Olivine has a wide range of Fo% ranging from 60 to 90, and MnO and FeO in the olivine are decreased with increasing Fo% oppositely increased $SiO_2$, MgO, and NiO. Ni in the whole rock is controlled not only by the mode of olivine but also by the Ni abondance in the olivine.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.4
• /
• pp.229-244
• /
• 2013

Arsenic contamination may be brought about by a variety of natural and anthropogenic causes. Among diverse naturally-occurring chemical speciations of arsenic, trivalent (As(III), arsenite) and pentavalent (As(V), arsenate) forms have been reported to be the most predominant ones. It has been well known that the behavior of arsenic is chiefly affected by aluminum, iron, and manganese oxides. For this reason, this study was initiated to evaluate the applicability of manganese slag (Mn-slag) containing high level of Mn, Si, and Ca as an efficient sorbent of arsenic. The main properties of Mn-slag as a sorbent were investigated and the sorption of each arsenic species onto Mn-slag was characterized from the aspects of equilibrium as well as kinetics. The specific surface area and point of zero salt effect (PZSE) of Mn-slag were measured to be $4.04m^2/g$ and 7.73, respectively. The results of equilibrium experiments conducted at pH 4, 7 and 10 suggest that the sorbed amount of As(V) was relatively higher than that of As(III), indicating the higher affinity of As(V) onto Mn-slag. As a result of combined effect of pH-dependent chemical speciations of arsenic as well as charge characteristics of Mn-slag surface, the sorption maxima were observed at pH 4 for As(V) and pH 7 for As(III). The sorption of both arsenic species reached equilibrium within 3 h and fitting of the experimental results to various kinetic models shows that the pseudo-second-order and parabolic models are most appropriate to simulate the system of this study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1148-1151
• /
• 2002

Dielectric ceramics with nominal composition of $(Ba_{0.93}Sr_{0.07}O)-0.5Sm_2O_3-4.5TiO_2$ was prepared using the conventional mixed oxide process-derived powder. Effect of $SiO_2$, $MnO_2$ and $Al_2O_3$ impurity addition on the microwave properties was examined in some detail. Measured relative permittivity $(\varepsilon_r)$ values were in the range of 53 to 59 and showed little dependence on impurity addition. In contrast, quality factor $(Q{\cdot}f)$ and temperature coefficient of resonant frequency $(\tau_f)$ values were greatly influenced by the type and the amount of impurities. It was found that 0.1~0.2wt% addition of $Al_2O_3$ was most effective for improving the properties, where ${\varepsilon}_r$, $Q{\cdot}f$ and $\tau_f$ values were 57.7, 10000, and +7ppm/$^{\circ}C$, respectively.

• Journal of Environmental Science International
• /
• v.16 no.1
• /
• pp.39-44
• /
• 2007

This study was conducted to investigate the contents of residual solvents and mineral components(11 kinds) in ginseng extracts with different extracting conditions(5 types) and commercial ginseng extract products(domestic, imported). Fine root was extracted with solution having various ethanol concentration after hexane treatment. Among 5 type extracts, residual solvent(hexane) was detected ginseng extracts treated ethanol mixed with hexane. But extracts that dried after soaked in hexane wasn't detected hexane. Mineral components(Al, Mn, Fe, Cu and Zn) were detected in fine root and 5 types of extracts. The contents of mineral components between fine root and extracts with various extracting conditions were similar, however, extracts that dried after soaked in hexane showed the lower amount in Al, Fe, Pb than the others. In comparison with commercial ginseng ex-tract products(domestic, imported), the distribution pattern of mineral was similar but the contents were a little different.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.396.2-396.2
• /
• 2014

백색 유기발광소자는 전색 디스플레이, 조명으로서의 잠재적인 특성으로 차세대 디스플레이 소자 기술로 많은 주목을 받고 있다. 백색 유기발광소자는 주로 R-G-B 영역의 다양한 발광층을 적층하여 제작한다. 하지만 여러 발광층을 적층해야하기 때문에 제작할 때 공정 과정이 복잡해지고, 높은 생산단가를 가지게 된다. 이런 문제를 해결하기 위해 형광체를 이용한 백색 유기발광소자의 연구가 진행되고 있지만, 아직 색순도와 색좌표에 대한 많은 연구가 미흡한 상태이다. 본 연구에서는 무기물 형광체를 활용하여 백색 유기발광소자의 전기적 특성과 광학적 특성을 관찰하였고, 광원으로 사용된 청색 유기발광소자에 녹색과 적색의 무기물 형광체를 결합하는 방법으로 백색 유기발광소자를 제작하였다. 광원으로 사용한 청색 유기발광 소자는 투명전극으로 ITO를 사용하였고, 정공 수송층으로 N,N'-bis-(1-naphthyl)-N,N'-diphenylbenzidine, 발광층으로 4,4-bis(2,2-diphenylethen-1-yl)biphenyl, 정공 저지 층과 전자 수송 층은 각각 bathocuproine 과 4,7-diphenyl-1,10-phenanthroline 을 사용 하였다. 전자 주입 층으로는 lithium quinolate를 사용하였으며 음극으로는 Al을 사용하였다. 색 변환 층으로 사용된 유기물 형광체는 sol-gel 방법으로 제작된 녹색 형광체 Y3Al5O12:Ce, 적색 형광체 Ca2AiO19:Mn 을 사용하였다. Sol-gel 방법으로 제작된 형광체는 X선 회절 분석기를 통해 JCPDS cards를 확인하였고, 형광체의 녹색과 적색의 혼합비율에 따른 색좌표를 확인하여 백색 유기발광소자를 제작 하였다.