• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.277-284
• /
• 2012

This study developed a new ceramics in which natural zeolite was mixed and calcined with industrial by-product such as converter slag, red mud, and fly ash and evaluated the feasibility of the ceramics for removal of heavy metals in acid wastewater. The removal rate of heavy metal by ceramics increased in the order of ZS (zeolite and slag) > ZR (zeolite and red mud) > ZF (zeolite and fly ash) ceramics. The alkalinity increment and coherence of ceramics were increased in the order of ZS > ZR > ZF ceramics. The mixing ratio of natural zeolite to industrial by-product for maximum removal efficiency of heavy metal was 1:1 for ZS ceramics and 1:3 for ZR and ZF ceramics. The order of removal efficiency of heavy metal was observed to be ZS > ZR > ZF ceramics under the mixing ratio of 1:1 for ZS ceramics and 1:3 for ZR and ZF ceramics. The removal efficiency of heavy metal by ZS ceramics with 1:1 mixing ratio was Al 100%, Cd 54.6%, Cr 99.9%, Cu 98.7%, Fe 99.9%, Mn 42.2%, Ni 59.9%, Pb 99.8%, Zn 87.6%, respectively. In addition, the removal capacity of heavy metal by ZS ceramics was observed to be Al 2.01 mM/g, Cd 0.27 mM/g, Cr 1.02 mM/g, Cu 0.83 mM/g, Fe 0.95 mM/g, Mn 0.41 mM/g, Ni 0.55 mM/g, Pb 0.25 mM/g, Zn 0.70 mM/g, respectively. The comparative evaluation in the light of removal capacity, alkalinity increment, and coherence of ceramics showed the ZS ceramics had higher feasibility as a media than others for removal of heavy metals in acid wastewater.

• Journal of Life Science
• /
• v.26 no.5
• /
• pp.603-607
• /
• 2016

A crude extracellular lipase from solvent-tolerant bacterium Pseudomonas sp. BCNU 106 was highly stable in the broad pH range of 4-10 and at temperature of 37℃. Crude lipase of BCNU 106 exhibited enhanced stability in 25% organic solvents such as xylene (121.85%), hexane (120.35%), octane (120.41 %), toluene (118.14%), chloroform (103.66%) and dodecane (102.94%) and showed excellent stability comparable with the commercial immobilized enzyme. In addition, the stability of BCNU 106 lipase retained above 110% of its enzyme activity in the presence of Cu²⁺, Hg²⁺, Zn²⁺ and Mn²⁺, whereas Fe²⁺ strongly inhibited its stability. The detergents including tween 80, triton X-100 and SDS were positive signals for lipase stability. Because of its stability in multiple organic solvents, cations and surfactants, the Pseudomonas sp. BCNU 106 lipase could be considered as a potential biocatalyst in the industrial chemical processes without using immobilization.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.414-421
• /
• 1995

In order to establish informations important to the measurement of lipoxygenase (LOX) activity, providing conditions most favorable for its action and determining factors that inhibit activity, the influence of extraction buffer, substrate, pH, storage, temperature, NaCl, $CaCl_2$, other cations and antioxidants on LOX activity, and localization of LOX in cucumber tissues were carried out. The most favored substrate for LOX was linolenic acid followed by linoleic and arachidonic acids. LOX activity in both peel and mesocarp tissue extracts was maximum at pH 5.5 and relatively stable at $40^{\circ}C\;and\;50^{\circ}C$ temperature. The condition of 0.2 M NaCl with pH 5.0 was observed to provide optimum LOX stability. The enzyme activity was reduced by addition of cations, $Mn^{2+},\;Cu^{2+}\;or\; Al^{3+}$, except $Ca^{2+}$ which stimulated activity of LOX. Butylated hydroxy anisole (BHA) and propyl gallate decreased LOX activity with increasing concentration. Cucumber peel had higher activity than other tissues, locule or mesocarp, of cucumber.

• Journal of Life Science
• /
• v.20 no.6
• /
• pp.902-906
• /
• 2010

A producer of thermophilic extracellular lipase, Geobacillus kaustophilus DSM 7263, was selected from various microorganisms of the Geobacillus genus. We investigated optimum conditions for mass production of G. kaustophilus lipase. Among the different natural oil media, olive oil was optimal for enzyme production. The maximum amount of enzyme production was obtained when G. kaustophilus was grown in a medium containing 0.5% olive oil as a carbon source. The pH and temperature for optimal growth were pH 8.0 and $55^{\circ}C$, respectively, while the optimum pH and temperature for lipase production were pH 6.0 and $50^{\circ}C$, respectively. In the presence of $Mg^{2+}$ and $Mn^{2+}$, lipase production was dramatically enhanced by 247% and 157%, respectively, whereas enzyme production was inhibited by $Zn^{2+}$, $Cu^{2+}$, and $Cd^{2+}$. The addition of 0.1% (v/v) triton X-100 increased lipase production and cell growth when compared to the negative control.

• Journal of Nutrition and Health
• /
• v.41 no.3
• /
• pp.242-253
• /
• 2008

It is a common clinical practice to recommend taking iron supplements for pregnant women during gestation. Although it is required to ensure adequate iron stores during pregnancy, there has been some debate over the interference effects of excessive iron load, because it is possible to compete in the transport in the intestine and placenta and in binding to serum proteins of other trace minerals. In this study, maternal and neonatal serum concentrations of Fe, Zn, Cu, Se, Cr, Mn, and Co were assessed along with maternal Fe intakes. A total of 124 pregnant women and their term neonates participated voluntarily in this research. The women were divided into one of the three groups {high Fe intake (HFI), median Fe intake (MFI), and low Fe intake (LFI)} by their total Fe intakes and one of the two groups (Anemic and Normal) by their Fe nutritional status. All the data were compared among the three groups and between the two groups also. Total Fe intakes of HFI, MFI, and LFI groups were 140.8 ${\pm}$ 76.1, 68.0 ${\pm}$ 11.2, and 30.2 ${\pm}$ 8.6 mg/day, respectively. Those of Anemic and Normal groups were 90.1 ${\pm}$ 74.8 and 86.6 ${\pm}$ 46.8 mg/day, respectively. Maternal Hb concentration and Hct were not significantly different among HFI, MFI, and LFI groups but those were significantly different between Anemic and Normal groups. However, neonatal Hb concentration was not significantly different among HFI, MFI, and LFI groups and between Anemic and Normal groups either. Maternal serum Fe concentrations of the three groups, HFI, MFI, and LFI, were similar but that of Anemic group was significantly lower compared to Normal group. However, there was no significant difference in neonatal serum Fe concentrations among the three groups and between the two groups either. Serum concentrations of the other trace minerals in both mothers and neonates were not significantly different among HFI, MFI, and LFI groups and between Anemic and Normal groups. In addition, in the maternal serum, Fe concentration was positively correlated to Zn and Se concentration, respectively. As for the neonatal serum, Fe concentration showed a positive correlation to Zn, Cu, Mn, Se, and Co concentration, respectively. No trace mineral concentration was found to correlate negatively to Fe concentration in both maternal and neonatal serum, The results in this study indicate that Fe intakes of pregnant women, even if it is considerably above the level of estimated average requirement (EAR), may not affect serum Fe concentration in both mothers and neonates. In addition it might not influence adversely on the availability of other trace minerals including Zn and Cu in both mothers and neonates.

• Korean Journal of Environmental Biology
• /
• v.19 no.3
• /
• pp.211-217
• /
• 2001

Salicylate is involved in the induction of pathogen-related proteins and plant defense response. The effects of salicylate on the activity isoperoxidase $A_3$ from tobacco callus (Nicotiana tabacum L.) and the protection against the enzyme inactivation by salicylate in the presence of $Fe^{2+}$ were examined. About 20% and 85% activity losses of peroxidase occurred at 0.48 mM and 0.6 mM salicylate, respectively, showing that isoperoxidase $A_3$ was inactivated by salicylate. The inactivation occurred depending on pH and showed noncompetitive inhibition mode. Moreover, inactivation of the enzyme by salicylate was completely protected in the presence of $Fe^{2+}$. Apoperoxidase without heme moiety was constructed and the effects of various metal ions on the recovery of enzyme activities were investigated. More than 80% of the activity was reconstituted by the addition of $Fe^{2+}$ or hemin. However, the enzyme activity was not recovered by $Cu^{2+},\;Zn^{2+},\;Co^{2+},\;or\;Mn^{2+}$.

• Journal of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.494-499
• /
• 1976

The extraction-polarographic method applied to the determination of micro amount of chromium (Ⅵ). Chromium(Ⅵ) was extracted into methylisobuthylketone(MIBK) layer containing diethyldithiocarbamate(DDTC) as Cr(Ⅲ)-DDTC complex from acetate buffered aqueous, solution of pH 5.4 and the direct current polarogram for the extract was recorded after addition of sodium perchlorate as supporting electrolyte. The reduction current was diffusion controlled. And the half wave potential of this reduction wave was -0.81 volt vs. SCE. The diffusion current was proportional to the chromium concentraticn in aqueous solution in the range of 8∼160 ppm. And the chromium(Ⅵ) could be selectively determined in the presence of chromium(Ⅲ), since the chromium(Ⅲ) did not interfere up to twice the amount of chromium(Ⅵ). Many of other metals such as Mn(Ⅱ), Cu(Ⅲ), Zn(Ⅱ), Mg(Ⅱ), Ni(Ⅱ) and Ag(Ⅰ) were found to have no effect even when present in 1000 times the amount of chromium (Ⅵ).

• Applied Biological Chemistry
• /
• v.45 no.3
• /
• pp.179-184
• /
• 2002

To examine utilization of Korean black soybean as a natural pigment, the effects of temperature, carbohydrate, organic acid, vitamin C and metal ion were investigated. Korean black soybean pigment was more stable than other anthocyanin pigments when temperature was abused. There was no darkness effect in carbohydrate. In organic acid, the color intensity was increased. The vitamin C addition negatively affected on color of anthocyanin. Among the metal ions tested, $Cu^{2+}$ and $Zn^{2+}$ was not affected but $Mn^{2+}$ makes it unstable. Results indicate that Korean black soybean pigment was more stable than other anthocyanin pigment in various environment at pH 3.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.3
• /
• pp.348-355
• /
• 1989

This experiment was conducted to investigate the characteristics of alkaline protease from Aspergillus fumigatus which was isolated from soil as a superior strain for the production of the alkaline protease. The optimum temperature for enzyme activity was $50^{\circ}C$ and optimum pH was 9.0. The enzyme was stable at pH 8.0 to 10.0 and thermal inactivation was shown $30^{\circ}C$. The activity of the enzyme was increased by the addition of $Mn^{++},\;Cu^{++},\;Ba^{++},\;Mg^{++},\;$wheras it was inhibitied by $K^+,\;Fe^{+++},\;Ag^+,\;Pb^{++},\;Na^+,\;Ca^{++},\;Hg^+,\;Zn^{++}$. EDTA. 2, 4-DNP, ${\varepsilon}-amino$ caproic acid did not show inhibitory effect on the proteolytic activity of alkaline protease but P-chloromercuribenzoic acid inhibited the enzyme activity, indicating that reactive sulfhydryl group is required for the enzymatic activity. The reaction of this enzyme followed typical Michael-Menten Kinetics with the Km value of $8.33{\times}10^{-4}mole/{\ell}$ with the Vmax of $47.62{\mu}g/min$. This enzyme had stronger proteolytic activity than trypsin on substrate such as casin and hemoglibin.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.300-303
• /
• 2003

[ $0.91(PSN-PZT)-0.05BF-0.04PNW+0.3wt%MnO_2+0.6wt%CuO+xwt%CeO_2$ ] ceramics were fabricated with the variations of $CeO_2$ addition at the sintering temperature of $950^{\circ}C$ and their microstructure and dielectric and piezoelectric characteristics were investigated. As the amount of $CeO_2$ addition increased, the grain size, density and electromechanical coupling factor(kp) were increased and the mechanical quality factor(Qm) was decreased. At the $0.3wt%CeO_2$, density, grain size and electromechanical factor(kp) showed the maximum value of $7.87g/cm^3$, $3.22{\mu}m$ and 0.5, respectively. However, mechanical quality factor(Qm) showed the minimum value of 807 at the $0.5wt%CeO_2$.