• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.45-54
• /
• 2016

In this study, the construction method of new underground continuos impervious wall that the bentonite slurry keeps the stability of excavated trench and the mixture of cement and bentonite plays a role as a constituent of impervious wall in the trench. The merit of homogeneity of the method so called as a cement-bentonite slurry wall enables to accurately make an estimation of hydraulic conductivity of the walls compared with that by other general grouting methods and to verify their waterproof efficiency without difficulty at the design stage. The use of cement-bentonite slurry walls for the containment of groundwater flow has also proven a cost-effective impervious wall technology by employing the simple combination of construction equipments and easy and fast construction procedures. The engineering characteristics of cement-bentonite impervious wall obtained by carrying out the laboratory experiments under various conditions. This study reveals the effect of variation of constituent materials and their mixing methods (Water-Cement-Bentonite) on the engineering characteristics of a composition. Also, this study makes some recommendations on the optimum mixing ratio and mixing sequence for the best quality at the site. That is the most important factors to estimate the construction cost and design of the technique. The comparison is lastly made to evaluate the effect of ordinary Portland and blast furnace slag cement as a bonding material on the behavior of impervious walls.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.6
• /
• pp.1049-1053
• /
• 2009

This study was carried out to investigate the effects of Eucommia ulmoides Oliver (Du-Zhong) as a main ingredient in a mixture of various medicinal herbal extracts on blood pressure, serum lipid concentrations, and hematological variables in hypertensive patients. After 4 weeks on drinking the mixed medicinal herbal teas, systolic blood pressure remarkably decreased from 167.14 to 134.86 mmHg and diastolic blood pressure decreased from 100.00 to 87.10 mmHg. In terms of serum lipid profiles, there were no differences in total-cholesterol, HDL-cholesterol, LDL-cholesterol level, and atherogenic index, However, the level of triglycerol was significantly reduced from 237.1 before the experiment to 145.00 mg/dL after 4 weeks on drinking the mixed medicinal herbal teas. Serum triglyceride were remarkably reduced from 237.1 to 145.00 mg/dL in the hypertensive patients who had taken the combined medicinal herbal extracts. Compared with data obtained from the patients before the experiment, there were no differences in hematological variables (RBC, WBC, hematocrit, hemoglobin, platlets and homocysteine) after the 4 weeks experiments, but mean corpuscular hemoglobin concentration was significantly increased by 2.70% (p<0.05) in the blood samples. Based on these findings, it can be presumed that the examined mixed medicinal herbal tea may be effective in lowering blood pressure and in increasing mean corpuscular hemoglobin concentration due to reduced serum triglyceride levels in hypertension patients.

• Korean Journal of Plant Resources
• /
• v.25 no.2
• /
• pp.271-276
• /
• 2012

To develop antiobese food materials from medicinal plants, isolation of antiobese active compounds in $Yukeuigambitang$ of which activity was already proved in the previous study by animal experiments was performed. Antiobese effect of stepwise solvent fractions from 70% ethanol extract of $Yukeuigambitang$ was determined by the differentiation inhibition activity on 3T3-L1 preadipocytes. CH2Cl2 fraction had significant antiobese activity, and n-Hexane and EtOAc fractions were the next. Three phenolic compounds from $CH_2Cl_2$ fraction were identified by GC/MS analysis and one compound was finally isolated by HPLC. It was revealed as a new compound presumed to be one of the derivatives produced from the medicinal plants mixture in $Yukeuigambitang$.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.135-140
• /
• 1998

Drag reduction produced by dilute solution of water soluble ionic polymer-surfactant complex under turbulent flow in a rotating disk apparatus(RDA) was investigated in this study. Three different molecular weights of polyacrylic acid(PAA) were adopted as drag reducing additives, and distilled water was used as a solvent. Experiments were undertaken to observe the dependence of drag reduction on various factors such as polymer molecular weight, molecular expansions and flexibility, rotating speed of the disk and polymer concentration. Specific considerations were put on conformational difference between surfactant and polymer, and effect of pH on ionic polymer possessing various molecular conformation through pH. The complex of ionic polymer and surfactant(Sodium Dodecyl Sulfate) behaves like a large polyelectrolyte. Surfactant changes the polymer conformation and then increases the dimension of the polymer. The radius of gyration, hydrodynamic volume and relative viscosity of the polymer-surfactant system are observed to be greater than those of polymer itself. Such surfactant-polymer complex has enhanced drag reduction properties.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.511-521
• /
• 2006

Homologue and isomer patterns of polychlorinated dibenzo-p-dioxins(PCDDs) and polychlorinated dibenzofurans(PCDFs) congeners formed from phenols in the gas-phase at $600{\sim}700^{\circ}C$ and via particle-mediated reactions at $400^{\circ}C$ were studied in an isothermal flow reactor. A mixture of 20 phenols in relative concentrations found in a municipal waste incinerator(MWI) stack gas was used for this study. PCDDs and PCDFs homologue and isomer patterns obtained from the phenol. From the phenol experiments, gas-phase formation at $600{\sim}700^{\circ}C$ favors PCDFs formation whereas particle-mediated formation at $400^{\circ}C$ favors PCDDs formation. DD and DF were most abundant homologue groups, PCDDs and PCDFs homologue fraction decreased with increasing number of chlorine substituents. PCDDs and PCDFs homologue and isomer fractions were almost constant from gas-phase formation and particle-mediated formation. Unsubstituted phenol, which was present in high concentration, played a significant role in the formation of PCDD/Fs congeners under both sets of experimental conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.2
• /
• pp.217-222
• /
• 2003

We studied effects of hot water extract of Lentinus edodes (Berk.)sing. and Pleurotus eryngii (De Candolle ex Fries) Quel mushroom on proliferation and apoptosis of the human colon adenocarcinoma, HT-29 and Caco-2.. Cells were maintained with Dulbecco's modified Eagle medium/Ham's F-12 nutrient mixture supplemented with 10% fetal bovine serum at 37$^{\circ}C$ in a humidified $CO_2$. For cell proliferation experiments, cells were seeded in 35 mm dishes, treated with the various concentrations of the extract for the different time course. Apoptosis was measured by caspase-3 activity The more contents of the extract added in HT-29 and Caco-2 were, the more cell proliferation was suppressed. When we incubated HT-29 cells for 24, B\ulcorner72, and 96 hours after treatments, cell proliferation was markedly suppressed after 96 hours. Also, caspase-3 activity in HT-29 was increased by the treatment of Lentinus edodes and Pleurotus eryngii extracts. However, the treatment of the extract to SNU484, Korean stomach adenocarcinoma, did not show any influence on cell proliferation and caspase-3 activity Therefore, Lentinus edodes and Pleurotus eryngii are strongly recommended for the prevention and treatment of colon cancer.

• Journal of Adhesion and Interface
• /
• v.15 no.3
• /
• pp.100-108
• /
• 2014

In this work, a series of molar ratios composed with YD-128 and DDM were chosen based on the viscosity analysis. The mixtures of YD-128 and DDM with the different molar ratios were cured at $170^{\circ}C$ for 15 min followed by post cure at $190^{\circ}C$ for two hours. The thermal properties of the cured samples were investigated with DSC, TGA, DMA, and TMA. The conversion ratio of the mixtures of YD-128 and DDM (1 : 1.1) was calculated by dividing ${\Delta}H$ obtained from DSC experiments for each cured sample by ${\Delta}H$. The TGA data of the cured samples showed that the thermal stability and thermal degradation activation energy were proportional to the amount of DDM in the mixtures. However, the highest tan ${\delta}$, and the lowest thermal expansion data with DMA and TMA respectively were obtained from the stoichiometric mixture of YD-128 and DDM. Furthermore, the different ratio of mixtures were applied to test specimens to be cured at $170^{\circ}C$ to measure single lap shear strength with universal testing machine.

• Journal of the Korean Chemical Society
• /
• v.43 no.4
• /
• pp.438-446
• /
• 1999

The optimum analytical method of aldehydes, ozone by-products, was established by reverse phase liquid chromatography. Six aldehydes including formaldehyde, acetaldehyde, acrolein, propionaldehyde, butylaldehyde and benzaldehyde, and one ketone including acetone were selected as aldehyde test samples through preliminary experiments. Such analytical conditions as the pH of citrate buffer solution, reaction temperature, reaction time, and concentration of DNPH, the component and composition of desorption solvent were optimized. As the result, pH 3.0 of citrate buffer solution, 40$^{\circ}C$ of reaction temperature, 15 minutes of reaction time, and 0.012% of DNPH concentration were chosen as optimum conditions. Aldehydes-DNPH derivatives in water were concentrated on $C_18$ Sep-Pak cartridge and followed by elution of their derivatives fraction with THF/ACN(70/30) mixture, and showed recoveries of the range from 87 to 107%. Separation condition on Nova-Pak $C_18$ column with low pressure gradient elution from ACN/MeOH/water(30/10/60) of an initial condition to 80% ACN of a final condition was found to give a good resolution within 20 minutes of run time. 86% to 103% of recovery for aldehydes using this method was similar to that for aldehyde using EPA Method 554 which is ranged from 84% to 103%.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.527-534
• /
• 2012

The adsorption dynamics of activated carbon (AC) and carbon molecular sieve (CMS) beds were studied to recover ethylene from FCC fuel gas. In this study, the FCC fuel gas used consisted of six-component mixture ($CH_4/C_2H_4/C_2H_6/C_3H_6/N_2/H_2$,32:15:14:2:12:25 vol.%). And the breakthrough experiments of adsorption and desorption were carried out. The breakthrough sequence in the AC bed was $H_2$ < $N_2$ < $CH_4$ < $C_2H_4$ < $C_2H_6$ while the sequence in the CMS bed was $H_2$ < $CH_4$ < $N_2$ < $C_2H_6$ < $C_2H_4$. The separation performance of the CMS bed during the adsorption step was lower than that of the AC bed. However, due to the characteristics of kinetic separation, the CMS bed could remove $CH_4/N_2$ as well asthe molecules that are larger than $C_2H_6$, which was not easy to be done by the AC bed. Since it was hard to regenerate the adsorption bed by simple depressurization, vacuum regeneration should be adopted. As a result, the pressure vacuum swing adsorption (PVSA) process, consisting of CMS pretreatment process and AC main process, was suggested to recover ethylene efficiently.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.783-791
• /
• 2008

The dynamic characteristics of adsorption using an adsorption bed packed with Li-X zeolite (UOP) were studied through the breakthrough experiments of $H_2/CH_4$ (90:10 vol%), $H_2/CO$ (90:10 vol%) and $H_2/CO_2$ (80:20 vol%) mixtures. Effects of feed flow rate (6.24~10.24 LPM) and adsorption pressure (6.1 bar~10.1 bar) in the Li-X zeolite bed with 2.7 cm of inside diameter and 80 cm of bed length were observed. The smaller feed rate or the higher operating pressure, resulted in the longer of the breakthrough time and the breakthrough curve have tailing due to temperature variance in the bed. The adsorption dynamics of the Li-X zeolite bed were predicted by using LDF model with feed flow and pressure dependent diffusivity. The prediction and experimental data were analyzed with a nonisothermal, nonadiabatic model, dual-site langmuir (DSL) isotherm