• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.513-516
• /
• 2006

Waste concrete powder(WCP) is a secondary by-product generated while processing waste concrete manufactured to coarse and fine aggregates for concrete. In order to assess the possibility of using WCP as admixture for self-compacting concrete, self-compactability, compressive strength and durability of self-compacting concrete containing waste concrete powder were investigated. Experimental results of this study appeared that in case of SCC mixed with WCP only, self-compactability and compressive strength decreased with increasing mixing ratio of WCP. When Blast-furnace slag(BFS) was added to SCC, self-compactability and compressive strength for a unit amount of cement increased. Also, SCC containing 15% BFS and 15%, 30% and 45% WCP, the dry shrinkage and carbonation depth appeared a tendency to decrease with increasing mixing ratio.

• Journal of Korean Society on Water Environment
• /
• v.21 no.4
• /
• pp.379-384
• /
• 2005

In this research, coagulation was employed as the pretreatment for membrane process. The effective coagulation conditions were decided after the discussion of different coagulant doses and mixing conditions, etc. Raw water was taken from Nakdong River. The best operation occurred when G value was $230s^{-1}$ and the slow mixing lasted around 5 minutes at G value was $23s^{-1}$. To investigate the optimum coagulant dosage, the optimum organics removal was target as organic removal reduces membrane fouling effectively than particle removal. This result indicated that organics are more important causes than turbidity for membrane fouling. However, turbidity becomes an important factor after certain amount of organic matters is removed.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.4
• /
• pp.91-97
• /
• 2000

The objective of this study was to evaluate the possiblity of Foodwaste and co-treatment with other waste for vermistabilization. The value of oxidation-reduction potential(Eh) of the dewaterized foodwaste by a plant of subatmospheric evaporation was a possitive(+) value indicating, but the values of pH, salinity was idicating an unfavorable condition for earthworm life. The paper mill mixing waste properties by ripening for 20days were changed into the favorable range for earthworm. The growth of earthworms in foodwaste and mixing waste of paper mill 30% was found to be 68%, 84% for the survival rate, 227%, 275% for the liveweight increasing rate, respectively. The ingestion rate of foodwaste and mixing waste of paper mill 30% indicate 0.72g/g·d, 0.81g/g·d, respectively. About 62∼75% of ingestion amount produce cast and characteristics of cast indicate pH 6.1∼6.5 organic component 34∼42%, salinity 0.35∼0.4, CEC 73∼94 me/100g, N, P, K concentration 0.8∼1.2%, 0.4∼1.6%, 0.43∼0.5% respectively. Therefore it can be evaluated that the casts are good soil condition and organic fertilizer.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.54-61
• /
• 2017

The purpose of this study is to develop standard reference materials for safety control of construction materials considering the required performance of standard materials including flow performance incorporating particles. The flow characteristics of concrete are very complicated depending on mixing proportions of constituent materials, admixtures, amount of mixing, type of mixer, time of mixing, temperature and so forth. Uncertainties and multidimensional properties of concrete have been evaluated through various studies but there are few researches for the development of standard reference material. In this study, based on the rheological concept, the flow performance of construction materials was evaluated to understand the properties of standard reference materials and was finally obtained representing materials which simulate the standard reference materials.

• Nuclear Engineering and Technology
• /
• v.32 no.6
• /
• pp.549-558
• /
• 2000

A transient model for hydrogen generation in molten metal-water interactions was developed with separate models for two stages of coarse mixing and stratification. The model selves the mechanistic equations (heat and mass transfer correlation, heat conduction equation and the concentration diffusion equation) of each stage with non-zero boundary conditions. Using this model, numerical simulations were performed for single droplet experiments in the Argonne National Laboratory tests and for FITS tests that simulated dynamic fragmentation and stratification. The calculation results of hydrogen generation showed better agreement to the experiment data than those of previous works. It was found from the analyses that the steam concentration to be reached at the reaction front might be the main constraint to the extent of the metal droplet oxidized. Also, the hydrogen generation rate in the coarse mixing stage was the higher than that in the stratification stage. The particle size was the most important factor in the coarse mixing stage to predict the amount of hydrogen generation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.92-93
• /
• 2020

In this study, the analysis was conducted in the aspect of non-hardened concrete of Ternary Mixed Aggregates, and it was determined that flowing and amount of air increased as the mixing combinations of RS increased. However, it is difficult to see the phenomenon only as a result of increasing mixing combinations of RS, and it is thought that the influence of CS and SS also plays a large role. For later analysis, we plan to conduct research on compressive strength and shrinkage according to age, and analyze more suitable mixing combinations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.189-190
• /
• 2023

In this study, the compressive strength and hydration heat of cement paste mixed with cellulose nanocrystal(CNC) and graphene oxide (GO) were evaluated. The difference was compared by mixing 0.1 vol.% ~0.4 vol.% of CNC and 0.05 wt.% ~ 0.1 wt.% of GO in a cement paste with a water cement ratio of 0.3. As a result, it was confirmed that the compressive strength increased as CNC and GO were mixed respectively, and then the compressive strength decreased when the appropriate mixing rate was exceeded. In the hydration heat measurement, there was no significant difference when only CNC was mixed, but it was confirmed that the hydration heat decreased as the amount of CNC mixing increased when used in combination with GO.

• Journal of Mushroom
• /
• v.13 no.2
• /
• pp.139-144
• /
• 2015

This study was done the calculation formula for calculating the below item. That is the moisture content of the substrates raw materials, water content of the mixed substrates; the amount of media, dry weight, amount of liquid, bulk density in the bottle; dried materials volume, water volume, mixing ratio in a substrates mixing materials; water requirement amount, replenishment amount for water content control of the substrates and the total amount of substrates. And each was prepared in an Excel file for automatically calculated. The calculation of the Excel file will be able to take advantage for the mushroom growers; to make raw material costs, per bottle nutrient content and moisture content maintained throughout the year and new media composition. At this time we expect, while minimizing the quantity or deterioration in the daily ups and downs continued growing courses throughout the year contribute to stabilizing production.

• Culinary science and hospitality research
• /
• v.16 no.3
• /
• pp.250-258
• /
• 2010

This study was performed to find the most desirable mixing formula for Sulgidduk added with Cheongkukjang powder for various benefits. The optimal mixing formulas were identified by evaluations of ingredients, the color, and the sensory and textual characteristics. As the amount of Cheongkukjang powder increased, the rice cake appeared redder, yellower and less luminous. The amount of crude ash was significantly smaller in the experimental groups than in the control group, and the amount of crude protein and crude fat was significantly high. The change in texture according to the amount of Cheongkukjang powder was not statistically significant, but hardness, adhesiveness, and cohesiveness showed significant differences(p<0.05). It was also found that chewiness increased while adhesiveness decreased as storage time increased. According to the results of the sensory evaluation, scores in the color and aroma decreased as the amount of Cheongkukjang powder increased. Overall acceptability score was highest in the 5% group, consisting of 68% of rice powder, 5% of Cheongkukjang powder, 10% of sugar, and 17% of water.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.588-593
• /
• 2012

Compatibility of unsaturated polyester (UP) and low profile agent (LPA) of polystyrene (PS) have been investigated under various mixing conditions such as the ratio of UP and LPA, mixing time, mixing temperature, and input amount of 2nd UP. It was possible to obtain mixture with small particle size and low phase separation in condition of 35 g of LPA, 25 g of 1st UP input, 5 min of mixing time, 1700 rpm of mixing speed, and 45 g of 2nd UP input. It was found that compatibility of UP and LPA was very sensitive to mixing conditions. In addition, molded sample using sheet molding compound prepared by stable mixing condition appeared good properties such as low water adsorption, low shrinkage, and high gloss.