• 대한환경공학회지
• /
• 제39권5호
• /
• pp.282-287
• /
• 2017

본 연구의 목적은 방사능 사고로 인한 오염물질 유입으로 인한 영향을 최소화하기 위한 제염제의 혼합확산장치 개발에 앞서 장치 가동으로 인한 혼합 및 확산영향을 예측하는데 있다. 유동특성분석을 위해 사용된 추적자는 방사성 동위원소는 Gy, To이며, 이를 검측하기 위해 2인치 NaI 방사선 검출기를 사용했다. 본 연구에 적용된 제염제 혼합확산장치의 임펠러는 3가지 type으로 제작하였다. 방사혼합형 임펠러는 상향류 흐름을 이용하여 수표면으로 확산이 가능하며, 최적의 조건을 찾기 위해 핀 구조를 조정하였다. 방사능 동위원소를 이용한 제염제 혼합확산장치의 유동특성을 분석한 결과, 모델별 혼합확산과 유동패턴특성을 획득하였다. Model 3 type은 별도의 Fin유도부와 보조 Fin이 구성되어 있어 다른 type의 임펠러보다 확산속도가 크고 완전혼합에 도달하는 시간이 짧게 나타났다.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.382-393
• /
• 2010

Thermal mixing by steam jets in a pool is dominantly influenced by a turbulent water jet generated by the condensing steam jets, and the proper prediction of this turbulent jet behavior is critical for the pool mixing analysis. A turbulent jet flow induced by a steam jet discharged through a vertical upward single hole into a subcooled water pool was subjected to computational fluid dynamics (CFD) analysis. Based on the small-scale test data derived under a horizontal steam discharging condition, this analysis was performed to validate a CFD method of analysis previously developed for condensing jet-induced pool mixing phenomena. In previous validation work, the CFD results and the test data for a limited range of radial and axial directions were compared in terms of profiles of the turbulent jet velocity and temperature. Furthermore, the behavior of the turbulent jet induced by the steam jet through a horizontal single hole in a subcooled water pool failed to show the exact axisymmetric flow pattern with regards to an overall pool mixing, whereas the CFD analysis was done with an axisymmetric grid model. Therefore, another new small-scale test was conducted under a vertical upward steam discharging condition. The purpose of this test was to generate the velocity and temperature profiles of the turbulent jet by expanding the measurement ranges from the jet center to a location at about 5% of $U_m$ and 10 cm to 30 cm from the exit of the discharge nozzle. The results of the new CFD analysis show that the recommended CFD model of the high turbulent intensity of 40% for the turbulent jet and the fine mesh grid model can accurately predict the test results within an error rate of about 10%. In this work, the turbulent jet model, which is used to simply predict the temperature and velocity profiles along the axial and radial directions by means of the empirical correlations and Tollmien's theory was improved on the basis of the new test data. The results validate the CFD model of analysis. Furthermore, the turbulent jet model developed in this study can be used to analyze pool thermal mixing when an ellipsoidal steam jet is discharged under a high steam mass flux in a subcooled water pool.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제41권8호
• /
• pp.586-597
• /
• 2014

최근 고성능 센서가 집적된 스마트폰과 웨어러블 디바이스 기술이 부각됨에 따라 이와 같은 플랫폼을 활용한 차세대 모바일 컴퓨팅 기술이 크게 주목받고 있다. 기존 행위인지는 지속적인 움직임에 따른 고유 패턴을 포착하는 반면, 자세인지는 급격한 순간 변화나 신체 방향의 변화를 포착하는 방법으로 접근되어 왔다. 그러나 이 두 가지의 패턴을 함께 고려하고 실제 활용 가능한 수준의 성능 확보와 그 시스템에 대한 연구는 다소 부족한 실정이다. 이에 본 논문에서는 최근 부각되는 스마트폰과 웨어러블 디바이스의 센서 데이터를 함께 고려하고 각각이 갖는 장점을 혼합한 사용자 행위 및 자세인지 기법과 스마트폰 플랫폼을 기반으로 실제 환경에서의 그 활용 방법을 제안한다. 스마트폰과 웨어러블 센서 데이터를 함께 운용하기 위한 전처리 방법을 설계하고 고유 진동 패턴과 수직, 수평 방향 패턴 특징을 혼합적으로 활용하여 인지 모델을 구축하였다. 이 과정에서 자전거 타기와 빠르게, 천천히 걷기, 뛰기와 같이 보다 다양한 행위와 서기, 앉기, 누워있기와 같은 자세 패턴을 고려하였다. 실험 결과 제안하는 기법의 성능과 타당성을 입증하였고 실제 환경에서의 적용을 통해 그 활용 가능성을 보였다.

• 한국농공학회지
• /
• 제33권3호
• /
• pp.81-90
• /
• 1991

The purpose of the this study was to investigate and analyze the various statistical data on the actual state of farmland uses given in Korea and Hokkaido of Japan. The results of this research are as follows ; 1. The rate of farmland uses was marked 118% and 99% in Korea and Hokkaido of Japan in 1988, respectively. That of Korea was higher than that of Hokkaido of Japan. The tendency of the value for Korea has been decreased since the value was shown peak in 1980, but that of the value for Hokkaido was found gradually the increased value. It was analyzed that the reason why the value was decreased in Korea was referred to avoid the crops culture, and the reason why the value was increased in Hokkaido was dueto increase the area of pasture. 2. The farmland use system according to region were d ue to be the mixing pattern of rice culture and dry-field crops in East region of korea and the type of mainly rice culture in West region. The pattern of farmland use system was used to be performed mainly the rice culture in Central region, the mixing type of rice culture and dry-field crops in South region, and the agriculture of mainly dry-field crops and dairy in East-North region in Hokkaido. 3. In the light of the rate of planting, the rate of rice culture and dry-field crops were 49% and 51% in Korea, respectively. As the values were 13% and 87% in Hokkaido of Japan, respectively, the dry-field crops attained the superiority. The main crop kinds was shown the rice culture in Korea and the feed plant in Hokkaido of Japan, respectively. 4. In considering the above results, there are much differences in agricultural style and industrialization processes in both country Korea and Japan. Especially much more differences were evident from farmland use system of Hokkaido Island where had unique agricultural style in Japan.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.174-180
• /
• 2015

8자 진동교반조에 대해 실험적으로 유동상태를 관찰하여 혼합 가시화, 소요동력, 고-액 및 기-액 물질이동에 대한 여러가지의 특성을 측정하였다. 진동수가 증가하면 유동상태, 혼합시간 소요동력 및 물질이동계수는 규칙적으로 변하지 않으므로 조작조건의 선정이 중요하다. 어떤 진동수에서라도 Fr = 0.095 이상에서는 실험적으로 명확하게 되었다. 이때 교반조내 유체는 선회류형으로 되어 혼합에 적합한 상태가 되고, 8자 진동교반에서의 최적 조작범위는 왕복 진동교반 보다도 넓었다. 8자 진동교반과 기존의 선회진동교반내의 고-액간 물질이동계수는 완전히 같은 식으로 상관되었다. 또한 기-액간 물질이동용량계수도 기존의 선회진동교반에서의 식과 같은 형태의 상관식으로 나타났다.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.225-233
• /
• 2008

The analysis in this paper is focused on the pattern of mixing of filaments over a cross-section of hybrid yarns according to different combinations of reinforcement and matrix filament yarns through microscopic view. The volume content of filament in hybrid yarn cross-section was maintained at 50% for both reinforcement and matrix, and the hybrid yarns count at 600 tex throughout the experiments. It was observed from the experiments that diameters of reinforcement and matrix filaments have strong effects particularly on the pattern of mixing of filaments over a cross-section of hybrid yarns such that the hybrid yarns with more or less equal diameters of reinforcement and matrix filaments showed considerably even distributions over the hybrid yarn cross-section. This paper also investigates the possibility of hybridizing carbon/aramid, carbon/glass and aramid/glass matrices through the commingling process. In the experiment, several process parameters were selected and they include pressure, yarn oversupply-rate and different nozzle types. As a result of these experiments, it was concluded that the hybridized materials show better performance than individual reinforced filament yarns in terms of mechanical properties. For small tensile forces, the carbon/glass/matrix combination turned out to be good enough for general purpose applications.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년도 추계학술발표대회 논문집
• /
• pp.146-150
• /
• 2009

Present family pattern of Korean society has been changed into nuclear family pattern based on the married couple from traditional expanded family pattern. As the entire social consciousness has been changed into private disposition, the number of independent household for 1 person has increases. Also, as the delivery age of first child became late according to the elongation of average period for the national education, the increment of average age for the first marriage and women's participation in the society, the family pattern of married couple lasts longer than used to be. Like this, considering the family formed period comprised from a household for 1 person to a household for 1married couple and senescence increase, as any response is inevitable for the requirement of residential space where 1~2 dwellers' life can be accepted economic and functionally within smaller scaled space, development and research on a plan system(flexible-typed plan) increasing the degree of freedom is required in developing plan of unit household. In the study for this, considering the change of population and social structure, I suggest the method in developing economic design responding to the differentiation, designing the change of support-system and infill-system based on the systemic comprehension about the residing environment in the family formation period and the research for main life pattern and residing environment in the family formation period in the present city life. I will set (family) composing system, develop basic and mixing typed standard model and establish the stage of applied development for the development of economic design.

• 복식
• /
• 제43권
• /
• pp.259-282
• /
• 1999

To analyze the characteristics of Orientalism which is expressed in the fashion of the 1990's this study was examined according to three aspects such as form textiles and pattern and the aspects was considered with regard to Chinese Indian Japanese Korean, Southeas Asian and North African style. 1. In form Orientalism which is influenced by latest other fashion trend; Naturalism and Minimalism is expressed as a comfortable casual style which simplifies the way of wearing and mixes the characteristic elements of folk costume with western costume. The way of layerd wearing like knotting wrapping draping and the symbolic from which is inspired by the unique are of each country are shown. 2. In textiles Chinese Japanese and Indian silk as well as Southeast Asian and North African cotton show a splendid oriental impression using vivid color. On the other hand the linens of Korea like hemp and ramie emphasize natural characteristics and show a simple and unartificial oriental beauty. But in the use of material and color it shows a remarkable tendency to break the preconceived idea by coordinating a luxurious silk with a practical denim or harmonizing technical new-masterials with traditional materials. 3. In pattern the decorative elements of Orientalism such as a traditional pattern skills to dye embroidery and other decorations are emphasized on the form of western costume. The sketchy patterns of Chinese Korean and Japanese styles which include the pattern of a flower a bamboo and a butterfly are expressed using embroidery or textile printing. The geometrical seriate patterns of Southeast Asian and North African styles use traditional dyeing methods like Batik. Also the Indian technique of decoration like Mirro Work satisfies handcrafted royalty and feminine romantic taste in modern minimal fashion. The Orientalism expressed in the fashion of 1990's emphasizes the characteristics of people wearing colthing which break the preconceived idea by simplifying the form harmonizing differences between oriental and western cultures and mixing the elements of traditional costumes among countries. Most of all. Ethno using geonmetrical seriate pattern and technical new metal material and Romantic Ethnic using flower embroidery precious stones and beads are appearing as a distinctinve feature.

• Fisheries and Aquatic Sciences
• /
• 제9권2호
• /
• pp.75-82
• /
• 2006

We evaluated the utility of applying isozyme analysis and two tagging methods, visible implant fluorescent elastomer (VIE) injection and uropod-cutting, to monitor the effects of releasing nursery-reared fleshy prawn (Fenneropenaeus chinensis) into natural habitat in Korea. One hundred thousand farmed prawns (70 mm long) were tagged by clipping off the outer left uropod and injecting them with VIE. This marked seed population was released at Muchangpo, Korea, on 11 and 19 July 2002. Two months later, total catch and catch per unit effort (CPUE) at three locations (Hongwon, Muchangpo, and Anmyundo) were determined. Total catch and CPUE increased nearly 18% over the previous year in Hongwon and Muchangpo. The mixing rate, estimated by uropod regeneration pattern, was 0.33% at Hongwon, 0.53% at Muchangpo, and 0.21% at Anmyundo. The recapture rate was about 3.5%. Isozyme analysis confirmed that the mixing rate was highest at Muchangpo. Moreover, fleshy prawns from Muchangpo were genetically most related to the seed population, indicating that the released prawns had largely remained near the released site. We also confirmed that isozyme genes are valuable as genetic markers for qualitative analyses of a released seed population.

• 한국유체기계학회 논문집
• /
• 제11권5호
• /
• pp.50-56
• /
• 2008

Metal cutting operations involve generation of heat due to friction between the tool and the pieces. This heat needs to be carried away otherwise it creates white spots. To reduce this abnormal heat cutting fluid is used. Cutting fluid also has an important role in the lubrication of the cutting edges of machine tools and the pieces they are shaping, and in sluicing away the resulting swarf. As a cutting fluid, water is a great conductor of heat but is not stable at high temperatures, so to improve stability an emulsion type mixed fluid with water and oil is often used. It is pumped over the cutting site of cutting machines as a state of atomized water droplet coated with oil by using jet. In this paper, to develop cutting fluid supplying nozzle to obtain ultra thin oil film for coating water droplet, a numerical analysis of three dimensional mixed fluid Jet through multi-stage nozzle was carried out by using a finite volume method. Jet flow characteristics such as nozzle exit velocity, development of mixing region, re-entrance and jet intensity were analyzed. Detailed mixing process of fluids such as air, water and oil in the nozzle were also investigated. It is easy to understand complex flow pattern in multi-stage nozzle. Important flow Information for advance design of cutting fluid supplying nozzle was drawn.