• 한국환경과학회지
• /
• 제6권5호
• /
• pp.425-435
• /
• 1997

One-dimensional thermodynamic mixed layer model to stimulate variations of meteorological variables wish the planetary boundary layer has been developed In this study. This model consists of 2 prognostic equations, which can predict the variations of potential temperature and mixing ratio and several diagnostic equations. Physics within the surface and mixed layers has been considered seperately in the model. For the variations of the model, Its result has been analysed and compared with observated data over Ole Dukyang Bay for one day, July 23, 1992. The simulated height of mixed layer is comparable to the observation and the variations of temperature and mixing ratio in the mixed layer are also reasonably simulated. Those Imply that the model responds appropriately with given boundary conditions In sprite of Its simplilfied assumptions applied to the model and insufficient boundary and Initial conditions.

• 대기
• /
• 제17권3호
• /
• pp.281-289
• /
• 2007

Micrometeorlogical and upper air observation have been conducted in order to determine the atmospheric boundary layer depth based on data from satellite and automatic weather systems. Terra/MODIS temperature profiles and sensible heat fluxes from the gradient method were used to estimate the mixed layer height over a coastal region. Results of the integral model were in good agreement with the mixed layer height observed using GPS radiosonde at Wolsung ($35.72^{\circ}N$, $129.48^{\circ}E$). Since the variation of the mixed layer height depends on the surface sensible heat flux, the integral model estimated properly the mixed layer height in the daytime. The buoyant heat flux, which is more important than the sensible heat flux in the coastal region, must be taken into consideration to improve the integral model. The vertical structure of atmospheric boundary layer can be analyzed only with the routine data and the satellite data.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.853-858
• /
• 2008

The structure of organic light-emitting diodes(OLEDs) with typical heterostructure consists of anode, hole injection layer, hole transport layer, light-emitting layer, electron transport layer, electron injection layer, and cathode. 4,4bis[N-(1-napthyl)-N-phenyl-amino]-biphenyl(NPB) used as a hole transport layer and 4'4-bis(2,2'-diphenyl vinyl)-1,1'-biphenyl(DPVBi) used as a blue light emitting layer were graded-mixed at selected ratio. Interface at heterojunction between the hole transport layer and the elecrtron transport layer restricts carrier's transfer. Mixing of the hole transport layer and the emitting layer reduces abrupt interface between the hole transport layer and the electron transport layer. The operating voltage of OLED devices with graded mixed-layer structure is 2.8 V at 1 $cd/m^2$ which is significantly lower than that of OLED device with typical heterostructure. The luminance of OLED devices with graded mixed-layer structure is 21,000 $cd/m^2$ , which is much higher than that of OLED device with typical heterostructure. This indicates that the graded mixed-layer enhances the movement of carriers by reducing the discontinuity of highest occupied molecular orbital(HOMO) of the interface between hole transport layer and emitting layer.

• Ocean Science Journal
• /
• 제42권4호
• /
• pp.241-246
• /
• 2007

Northern Arabian Sea (NAS) between $17^{\circ}N-20.5^{\circ}N$ and $59^{\circ}E-69^{\circ}E$ was observed by using Argo float daily data fur about 9 months, from April 2002 through December 2002. Results showed that during April - May mixed layer shoaled due to light winds, clear sky and intense solar insolation. Sea surface temperature (SST) rose by $2.3^{\circ}C$ and ocean gained an average of 99.8 $Wm^{-2}$. Mixed layer reached maximum depth of about 71 m during June - September owing to strong winds and cloudy skies. Ocean gained abnormally low $\sim18Wm^{-2}$ and SST dropped by $3.4^{\circ}C$. During the inter monsoon period, October, mixed layer shoaled and maintained a depth of 20 to 30 m. November - December was accompanied by moderate winds, dropping of SST by $1.5^{\circ}C$ and ocean lost an average of 52.5 $Wm^{-2}$. Mixed layer deepened gradually reaching a maximum of 62 m in December. Analysis of surface fluxes and winds suggested that winds and fluxes are the dominating factors causing deepening of mixed layer during summer and winter monsoon periods respectively. Relatively big]h correlation between MLD, net heat flux and wind speed revealed that short term variability of MLD coincided well with short term variability of surface forcing.

• 한국환경과학회지
• /
• 제2권1호
• /
• pp.17-26
• /
• 1993

The layer that is directly influenced by ground surface is called the atmospheric boutsdary layer in comparison with the free atmosphere of higher layer. In the boundary layer, the changes of wind, temperature and coefficient of turbulent diffusion in altitude are large and have great influences an atmospheric diffusion. The purpose of this paper is to express the structure and characteristics of development of mixed layer by using laboratory experiment and numerical simulation. Laboratory experiment using water tank are performed that closely simulate the process of break up of nocturnal surface inversion above heated surface and its phenomena are analyzed by the use of horizontally averaged temperature which is observed. The result obtained from the laboratory experiment is compared with theoretical ones from ; \textsc{k}-\varepsilon numerical model. The results are summarized as follows. 1) The horizontally averaged temperature was found to vary smoothly with height and the mixed layer developed obviously being affected by the convection. 2) The mean height of mixed layer may be predicted as a function of time, knowing the mean initial temperature gradient. The experimental values are associated well with the theoretical values computed for value of the universal constant $C_r$= 0.16, our $C_r$ value is little smaller than the value found by Townsend and Deardoru et al.

• 한국대기환경학회지
• /
• 제7권1호
• /
• pp.41-47
• /
• 1991

Air pollution potentials of the 7 cities in the central part of Korea were obtained with the mean wind speed within the mixed layer and the mixed layer height calculated by the Jump Model. Seasonal variation of the afternoon mixed layer height in Seoul area shows that low in winter and high in summer. Annual mean of the morning air pollution potential was lowest in Incheon and highest in Wonju. On the other hand annual mean of the afternoon air pollution potential was lowest in Incheon and highest in Chuncheon. Relatively low air pollution potential in Incheon can be explained as high mixed layer height and the effect of sea breeze.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.31-32
• /
• 2008

The structure of OLEDs with conventional heterostructure consists of anode, hole injection layer, hole transport layer, light-emitting layer, electron transport layer, electron injection layer, and cathode. NPB used as a hole transport layer and DPVBi used as a blue light emitting layer were graded-mixed at selected ratio. Interface at heterojunction between the hole transport layer and the elecrtron transport layer restricts device's stability. Mixing of the hole transport layerand the emitting layer removes abrupt interface between the hole transport. layer and the electron transport layer. The stability of OLED with graded mixed-layer developed in this study was improved.

• Ocean and Polar Research
• /
• 제24권2호
• /
• pp.135-146
• /
• 2002

The upper ocean in the western equatorial Pacific warm pool during TOGA-COARE IMET IOP was simulated using a one-dimensional turbulence closure ocean mixed-layer model, which considered recent observations, such as the remarkable enhancement of turbulent kinetic energy near the ocean surface. The shoaling/deepening of the mixed layer and warming/cooling subsurface water in the model were in reasonable agreement with the observations. There was a significant improvement in simulating the cooling trend of the sea surface temperature under a westerly wind burst with heavy rainfall over previous simulations using bulk mixed-layer models. By contrast the simulated sea surface salinity (SSS) departed significantly from the observed SSS, especially during a westerly burst and the subsequent restratification period, which might be due to 3-D control processes, such as downwelling/upwelling or advection.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.253-264
• /
• 2018

GPS 라디오존데는 정밀 기상 센서와 GPS 위성 네트워크에서 생성된 데이터를 사용하여 풍선이 터질 때까지 상승하면서 종관 규모의 연직 관측을 수행하도록 설계되었다. GPS 라디오존데는 정밀한 온도, 습도 및 기압 센서를 내장하고 있다. GPS 라디오존데를 사용하여 2016년 3월 9일 18시부터 2016년 3월 12일 06시까지 서해의 세 섬에서 대기경계층을 집중관측하였고, 야간 안정층이 억제되고 오히려 야간 혼합층이 발달되는 사례를 조사하였다. 야간 혼합층은 3월 9일에 지표 열플럭스에 의해 발달된 반면에 3월 10일 혼합층 높이가 가장 높았던 21시에는 시어 생성이 가장 높았다. 난류운동에너지를 생산하는 수평 바람의 연직 층밀림과 표면 열플럭스가 야간에도 혼합층을 성장시키는 데 중요한 역할을 하였다.

• 한국재료학회지
• /
• 제19권4호
• /
• pp.207-211
• /
• 2009

In this study, we attempted to develop a convenient aluminizing process, using Al-Ti mixed slurry as an aluminum source, to control the Al content of the aluminized layer as a result of a one-step process and can be widely adopted for coating complex-shaped components. The aluminizing process was carried out by the heat treatment on disc and rod shaped S45C steel substrates with Al-Ti mixed slurries that were composed of various mixed ratios (wt%) of Al and Ti powders. The surface of the resultant aluminized layer was relatively smooth with no obvious cracks. The aluminized layers mainly contain an Fe-Al compound as the bulk phase. However, the Al concentration and the thickness of the aluminized layer gradually decrease as the Ti proportion among Al-Ti mixed slurries increases. It has also been shown that the Al-Ti compound layer, which formed on the substrate during heat treatment, easily separates from the substrate. In addition, the incorporation of Ti into the substrate surface during heat treatment was not observed.