• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.130-135
• /
• 1999

The enhanced slag fineness and the batch water of low water-to-cement ratio(W/C) were employed in order to improve the early strength of blast-furnace slag blended cement at low temperature. A grinding aid was used to grind the blast-furnace slag into the fineness of 6,280$\textrm{cm}^2$/g (Blaine), and this fine slag was then homogeneously mixed with the ordinary Portland cement to produce the blast-furnace slag blended cement containing 40% slag by weight composition. On the other hand, the batch water could be reduced from W/C=0.50 (KS L 5105) to W/C=0.33 through a commercial, naphthalene type superplasticizer. Through the method mentioned above, the early strength of the blast-furnace slag blended cement at low temperature could be enhanced even somewhat higher than the Portland cement strength. And the microsturcture of the cement was studied by both the pore structure analysis and the A.C. impedance measurement.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.147-152
• /
• 2000

For the probiotic feed production from residual food waste by using the yeast Kluyveromyces marxianus, aerobic liquid fermentation was attempted at $35^{\circ}C$. After grinding finely, optimal fermentation conditions of the substrate was investigated in shaking incubator. By controlling water content yeast growth was studied at each different solid content of 5, 10 and 15% respectively. The most active growth of the yeast was shown at 10%. For the stimulation of the cell growth, mixed culture with Aspersillus oryzae was conducted in a 2 litre-jar fermenter. As the results, the yeast growth rate was increased, but the maximum viable cell count amounted was slightly higher as $3.5{\times}10^9/ml$ than single culture.

• Korean Journal of Veterinary Research
• /
• v.41 no.1
• /
• pp.89-98
• /
• 2001

This study was conducted to detect the toxoplasma specific-DNA in circulating blood and organs collected from slaughtered pigs at slaughtering house and experimentally infected pigs with Toxoplasma gondii tachyzoites by polymerase chain reaction(PCR), and also PCR was applied to diagnose for acute phase of swine toxoplasmosis as a newly developed diagnostic test. The sensitivity of oligonucleotide primer, T-1 & T-2, designed from toxoplasma B1 gene amplification method was compared with Tp parasite detection by mouse inoculation(MI). On the other hand, latex agglutination test(LAT) was conducted to detect the serum antibodies comparing with the detection of toxoplasma by PCR and MI. The results obtained were summarized as follows. PCR was able to determine at the lowest level of $10^0/ml$ T. gondii in blood samples which were blended with a serial diluted T gondii in vitro. On the other hand, $10^2/5g$ of T gondii could detect from a variety of tissues including lung, diaphragm, liver, heart, spleen and brain in vitro. The primer was proved to specifically determine T gondii in blood and tissues in vitro but it did not detect Neospora caninum used as a negative control. DNA of T. gondii was effectively extracted by freezing, thawing and grinding twice both tissues mixed with T gondii in vitro and in experimentally infected pig's tissues. PCR detected specific DNA in the blood of experimentally infected pigs at 108 hrs and 120 hrs post-infection, it was the same time that the pigs showed fever and parasitaemia. In case of tissue, specific DNA was, however, detected only lung from experimentally infected pigs. Even though the duration of acute phase was from 3 to 7 days post-infection, but the latex agglutination test (LAT) results appeared from 8 days post-infection. A comparison of sensitivity in determining T gondii in blood samples between PCR and MI, PCR positive rate ranged from 25 to 33.3%, but that of MI covered from 75 to 100%.

• Korean journal of food and cookery science
• /
• v.22 no.6 s.96
• /
• pp.799-807
• /
• 2006

This study was designed to assess the perception and use of weaning diets and to serve as a guideline of processed weaning diets through a survey focused on the Gwangju-Jeonnam regions. The following results were obtained. Most subjects mixed 'home-made' and 'commercial' weaning diets and considered weaning diets as 'a diet for supplementing insufficient nutrition'. The most frequently used type of weaning diet was 'a kind of gruel with vegetables or meat', followed by 'boiling powder with water' and 'grinding or crushing fruits'. Two thirds (68%) of subjects had experienced buying weaning diets, mainly a powder type. The most common reason to buy weaning diets was 'troublesome', followed by 'excellent nutrition', 'convenient to go out', and 'don't know how to make'. The following results according to factors were found. The types of provided and of weaning diets were significantly different by age; the understanding of weaning diets, by education and mothers' employment; and where to get information about weaning diets, by economic status. The highest request for developing weaning diets was a type of 'powder' and 'gruel', and the highest cooking type was 'adding boiling water', followed by 'a semi-cooking product' and 'a finished product'. 'Retort pouch' package, a 'single' package unit, and 'keeping cold' were also requested by the participants. A desirable package unit in developing weaning diets was significantly different by mother's employment; the cooking type of product, by economic status; a way to keep product, by mother's employment; and package types, by education and economic status. When weaning diets were made by environmentally friendly agriculture, 69.5% of subjects were willing to purchase them. With the increase in economic status, education, and employment rate, the use of weaning diets on the market will increase. For this reason, correct nutrition education is needed. With the increasing demand for environmentally friendly agriculture, a variety of weaning diets should be developed to meet this demand.

• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.663-668
• /
• 2013

The effects of polymers on the cocrystallization of adefovir dipivoxil (AD) and suberic acid (SUB) were investigated. The polymeric additives in the present study were poly(ethylene glycol) (PEG) and poly(acrylic acid) (PAA). When the polymers were added to the solution of AD and SUB, their effects were limited to the morphology and crystallinity of the AD/SUB cocrystal, which could be also achieved without polymeric additives by the excess amount of SUB in the solution or through the solvent-assisted grinding. When the polymers were mixed with AD before adding SUB in the solution, PEG was dramatically more effective at the same amount with possible alteration of the cocrystal structure. Also, PAA completely inhibited the formation of crystals. The present study demonstrated that the effects of polymers on the cocrystallization could be tuned by simply modifying the mixing strategy.

• Korean Journal of Materials Research
• /
• v.33 no.8
• /
• pp.337-343
• /
• 2023

3Y-TZP (3 mol% yttria-stabilized tetragonal zirconia polycrystals) ceramics have excellent mechanical properties including high fracture toughness, good abrasion resistance as well as chemical and biological stability. As a result, they are widely used in mechanical and medical components such as bearings, grinding balls, and hip implants. In addition, they provide excellent light transmittance, biocompatibility, and can match tooth color when used as a dental implant. Recently, given the materials' resemblance to human teeth, these ceramics have emerged as an alternative to titanium implants. Since the introduction of CAD/CAM in the manufacture of ceramic implants, they've been increasingly used for prosthetic restoration where aesthetics and strength are required. In this study, to improve the surface roughness of zirconia implants, we modified the 3Y-TZP surface with a biocomposite of hydroxyapatite and forsterite using room temperature spray coating methods, and investigated the mixed effect of the two powders on the evolution of surface microstructure, i.e., coating thickness and roughness, and biological interaction during the in vitro test in SBF solution. We compared improvement in bioactivity by observing dissolution and re-precipitation on the specimen surface. From the results of in vitro testing in SBF solution, we confirmed improvement in the bioactivity of the 3Y-TZP substrate after surface modification with a biocomposite of hydroxyapatite and forsterite. Surface dissolution of the coating layer and the precipitation of new hydroxyapatite particles was observed on the modified surface, indicating the improvement in bioactivity of the zirconia substrate.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.718-724
• /
• 1999

This study was investigated the changes of the properties of matter such as the gel formation of the combined fish based on the mixed rate between the ocean jumbo squid and Alaska pollock surimi, and compared the relationships between the gel formation and water holding capacity. The changes of the gel formation based on 20 min fish grinding time and $2.5\%$ salt concentration according to the mixed rate was thought as the optimal addition limit. There was no significant function of gel product more than $20\%$ Jumbo squid meat. The more squid meat in the mixed meat could make the lower breaking stress but 7:3 rate of pollock : squid could retain breaking strain. The effect of the moisture content on mixed fish meat was studied and the drastic decrease of the gel formation and water holding capacity was indicated in $78\%$.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.362-367
• /
• 2006

Waste activated sludge(WAS) collected from domestic wastewater treatment plant is biomass that contains large quantities of organic matter. However, relevant literature show that the bio-hydrogen yield using WAS was too low. In this study, the effect of pretreatment of WAS on hydrogen yield was investigated. Pretreatment includes acid and alkali treatments, grinding, heating, ozone and ultrasound methods. After pretreatment organic matters of WAS were solubilized and soluble chemical oxygen demand(SCOD) was increased by 14.6 times. Batch experiments were conducted to investigate the effects of pre-treatment methods and buffer solution, hydrogen partial pressure, and sodium ion on hydrogen production from WAS by using heated anaerobic mixed cultures. Experimental results showed that addition of buffer solution, efficient pre-treatment method with alkali solution, and gas sparging condition markedly increased the hydrogen yield to 0.52 mmol $H_2/g$-DS.

• Steel and Composite Structures
• /
• v.34 no.5
• /
• pp.681-698
• /
• 2020

The paper addresses contribution to the modeling and optimization of major machinability parameters (cutting force, surface roughness, and tool wear) in finish dry hard turning (FDHT) for machinability evaluation of hardened AISI grade die steel D₃ with PVD-TiN coated (Al₂O₃-TiCN) mixed ceramic tool insert. The turning trials are performed based on Taguchi's L₁₈ orthogonal array design of experiments for the development of regression model as well as adequate model prediction by considering tool approach angle, nose radius, cutting speed, feed rate, and depth of cut as major machining parameters. The models or correlations are developed by employing multiple regression analysis (MRA). In addition, statistical technique (response surface methodology) followed by computational approaches (genetic algorithm and particle swarm optimization) have been employed for multiple response optimization. Thereafter, the effectiveness of proposed three (RSM, GA, PSO) optimization techniques are evaluated by confirmation test and subsequently the best optimization results have been used for estimation of energy consumption which includes savings of carbon footprint towards green machining and for tool life estimation followed by cost analysis to justify the economic feasibility of PVD-TiN coated Al₂O₃+TiCN mixed ceramic tool in FDHT operation. Finally, estimation of energy savings, economic analysis, and sustainability assessment are performed by employing carbon footprint analysis, Gilbert approach, and Pugh matrix, respectively. Novelty aspects, the present work: (i) contributes to practical industrial application of finish hard turning for the shaft and die makers to select the optimum cutting conditions in a range of hardness of 45-60 HRC, (ii) demonstrates the replacement of expensive, time-consuming conventional cylindrical grinding process and proposes the alternative of costlier CBN tool by utilizing ceramic tool in hard turning processes considering technological, economical and ecological aspects, which are helpful and efficient from industrial point of view, (iii) provides environment friendliness, cleaner production for machining of hardened steels, (iv) helps to improve the desirable machinability characteristics, and (v) serves as a knowledge for the development of a common language for sustainable manufacturing in both research field and industrial practice.

• Food Science and Preservation
• /
• v.13 no.3
• /
• pp.344-350
• /
• 2006

Soaking and drying were studied for seven grains and legumes including glutinous rice, brown rice, glutinous brown rice, glutinous barley, Seoritae, Heuktae and red bean to improve taste of cooked mixed grams and make easy to cook then Seoritae and Heuktae showed the highest water absorption and the rest were in the order of glutinous barley, glutinous rice, milled rice, brown glutinous rice, brown rice, and red bean. In regards with water absorption index by soaking temperature, the higher the temperature showed, the more water absorption and the shorter time to reach the water absorption balance, the more grinding legumes. showed the more water absorption and the shorter time to reach to the water absorption balance. The soaked samples were dried at mom temperature $30^{\circ}\C,\;50^{\circ}\C$, and microwave 300 W, 700 W and 1000 W power. As a result 700 W drying method br microwave can dry samples in the shortest time without damage to the samples. Therefore, it was considered as the best pretreatment conditions for mixed stains to dry with 700 W microwave after one-hour soaking at $30^{\circ}C$.