• 한국분말재료학회지
• /
• 제7권1호
• /
• pp.6-11
• /
• 2000

Two kinds of Bi2Te3 powders, pure Bi2Te3/2vol.%ZrO2, have been prepared by a mechanical grinding process process. Effect of mixing of the powders on thermoelectric of the sintered body has been investigated by measuring Seebeck Coeffcient, specific electric resistivity and thermal conductivity. With an increase in the weight fraction of the Bi2Te3/2vol.%ZrO2 powder from 0 to 40wt.%. Especially, the figure of merit of the mixedBi2Te3 sintered body increases and thereafter dedreases above 40wt.%. Especially. the figure of merit of the mixed Bi2Te3 sintered bodies with mixing of Bi2Te3/2vol.%ZrO2 powder increased about 1.3time in comparison with the value of the specimen before mixing. Mixing of two kinds of Bi2Te3 powders which have different theramal and electric propertries with each other seemed to be useful methob to increase the figure of merit of Bi2Te3 sintered body.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1997년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.24-25
• /
• 1997

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권2호
• /
• pp.135-141
• /
• 2013

본 연구에서는 CaO-$SiO_2-Al_2O_3$가 다량 함유된 산업폐기물과 산업부산물을 소성하여 개발한 분말형 속경성 분말을 초기강도의 향상을 위해 기능성 분쇄조제로 처리하여 분쇄한 속경성 미분말을 제조하였다. 이렇게 제조된 미분말을 BFS 분말과 일정비율로 혼합한 후, 시멘트에 첨가하여 모르타르 압축강도 실험을 실시하였다. 그 결과 BFS 조기강도 향상 실험 (Series I)에서는 클링커 분쇄시 기능성 분쇄조제가 첨가되어 분쇄된 속경재가 혼합된 BFS의 초기강도 발현이 우수하며 OPC 조기강도 향상 실험 (Series II)에서는 Clinker-C에 본 실험의 기능성 분쇄조제가 첨가되어 분쇄된 속경성의 분말형 자극제가 첨가된 경우에 가장 압축강도가 높은 사실을 알 수 있었다.

• 생명과학회지
• /
• 제9권2호
• /
• pp.194-200
• /
• 1999

Pefloxacin을 15분간 분쇄한 분쇄품에 있어서는 $D_10$, $D_50$ 및 $D_90$은 각각 2.79 $\mu$m, 15.94 $\mu$m 및 39.75 $\mu$m로 나타나 표준품에 비해서 입도가 현저하게 작아짐을 알수 있었으며, 이 보다 분쇄시간이 길어질 경우 입자가 점점 더 커지는 경향을 나타내어 분쇄에 의해 입도가 점점 작아지다가 정점을 지난 후부터는 재응집에 의해 입자가 다시 커지는 경향을 나타냄을 알 수 있었다. 분쇄한 peflocacin의 XRD패턴, 열분석 측정 및 IR-Spectrum 관측 결과 분쇄의 유무와 관계없이 패턴의 양상이 변하지 않음을 알 수 있었으며, 분쇄라는 물리적인 조작에 의해 pefloxacin의 물성과 안정성에는 특이한 변화가 없음을 알 수 있었다. 이상의 결과들은 분쇄에 의한 pefloxacin의 화합물질 변화나 기능의 변화, 원자간의 결합상태, 분자의 구조 등에 있어서 물성적 변화의 차이가 없음을 나타내고 있다. Pefloxacin 표준품에 비해서 분쇄를 하였을 경우 용해도가 개선됨을 알수 있었으며, 특히 15 분간 분쇄한 분쇄품의 경우에 있어서 가장 양호한 용해도 곡선을 얻을 수 있었다. 즉, 난용성 항균제 pefloxacin은 분쇄라는 조작에 의해 입도가 작아지고, 비표면적의 증가로 인한 그 물리적인 특성중의 하나인 용해도가 개선되므로 속효성 제형으로의 전환이 가능함을 시사하였다［1,11］.

• 한국세라믹학회지
• /
• 제53권4호
• /
• pp.435-443
• /
• 2016

Coal ash, a material generated from coal-fired power plants, can be classified as fly ash and bottom ash. The amount of domestic fly ash generation is almost 6.84 million tons per year, while the amount of bottom ash generation is 1.51 million tons. The fly ash is commonly used as a concrete admixture and a subsidiary raw material in cement fabrication process. And some amount of bottom ash is used as a material for embankment and block. However, the recyclable amount of the ash is limited since it could cause deterioration of physical properties. In Korea, the ashes are simply mixed and used as a replacement material for cement. In this study, an attempt was made to mechanically activate the ash by grinding process in order to increase recycling rates of the fly ash. Activated fly ash was prepared by controlling the mill types and the milling times and characteristics of the mortar containing the activated fly ash was analyzed. When the ash was ground by using a vibratory mill, physical properties of the mortar mixed with such fly ash were higher than the mortar mixed with fly ash ground by a planetary mill.

• Journal of Ceramic Processing Research
• /
• 제23권2호
• /
• pp.165-170
• /
• 2022

Using electromagnetic shielding technology, the exterior walls of buildings can prevent the penetration of electromagnetic waves. This effectively reduces the electromagnetic field intensity and electromagnetic pulse inside buildings. Therefore, in recent years, researchers have focused on developing electromagnetic shielding technology. In this study, we analyzed the physical properties and EMP shielding efficiency of shielding materials, such as silicon carbide (SiC), obtained as a byproduct of the semiconductor manufacturing processes, and graphite mixed with mortar, used in the external walls. The shielding materials underwent pretreatment, such as grinding, before mixing them with mortar. Because shielding materials are expensive, the shielding efficiency was calculated by mixing the respective shielding materials with mortar in only the outermost 10% of the sample mortar volume. Moreover, we calculated the shielding efficiency of the different samples of mortar with shielding materials throughout the volume of the samples using shielding effectiveness (SE) estimation formula. The predicted SE values of the samples of mortar mixed with granular SiC, graphite powder, and SiC powder were 20 dB, 18 dB, and 28 dB, respectively. The SE of the sample of mortar mixed with SiC powder is approximately equal to 30 dB, that is, the maximum shielding efficiency (99.9%).

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.115-122
• /
• 1999

A friction tester to measure friction force generated at the interface between the piston ring and the cylinder liner was developed. Modified piston ring is bar-shaped and 100mm long. Surface of the modified piston ring is machined by the profile grinding machine to be formed as a shape of an arc of a circle. Measured data are treated as mean effective friction force and power loss. From this test it can be confirmed that friction force is deeply affected by surface shape of the piston ring and viscosity of supplied oil. Friction force is deeply affected by surface shape of the piston ring and viscosity of supplied oil. Friction force is decreased and power loss is increased with increasing velocity. And it is known that region of mixed lubrication is broader than estimated with theoretical analysis. it is expected that this tester can be used as the optimization tool of the surface shape of the piston ring at the first stage of development of the piston rings.

• The Journal of Advanced Prosthodontics
• /
• 제11권1호
• /
• pp.65-74
• /
• 2019

PURPOSE. To evaluate and compare the effect of different materials and techniques on the shear bond strength of veneering ceramic materials to zirconia. MATERIALS AND METHODS. 136 sintered zirconia cubes were prepared and randomly divided into four study groups according to corresponding methods of surface treatment and materials: GLN (grinding followed by laser scanning using Noritake Cerabien ZR), SLN (sandblasting followed by laser scanning using Noritake Cerabien ZR), GLV (grinding followed by laser scanning using VITA VM 9), and SLV (sandblasting followed by laser scanning using VITA VM 9). Spraying technique was performed to coat the core. Profilometer, SEM, XRD, EDS, universal testing machine, and stereomicroscope were used to record surface roughness Ra, surface morphology, phase transformation, elemental compositions, shear bond strength SBS values, and failure types, respectively. Specimens were investigated in unaged (not immersed in artificial saliva) and aged (stored in artificial saliva for a month) conditions to evaluate SBS values. RESULTS. Grinding and GLN as first and second surface treatments provided satisfactory Ra values in both conditions ($1.05{\pm}0.24{\mu}m$, $1.30{\pm}0.21{\mu}m$) compared to sandblasting and other groups (P<.05). The group GLN showed the highest SBS values in both conditions ($30.97{\pm}3.12MPa$, $29.09{\pm}4.17MPa$), while group SLV recorded the lowest ($23.96{\pm}3.60MPa$, $22.95{\pm}3.68Mpa$) (P<.05). Sandblasting showed phase transformation from t-m. Mixed failure type was the commonest among all groups. CONCLUSION. GLN showed to be a reliable method which provided satisfactory bond strength between the veneer ceramic and zirconia. This method might preserve the integrity of fixed dental crowns.

• Bulletin of the Korean Chemical Society
• /
• 제25권3호
• /
• pp.357-360
• /
• 2004

We developed in the present study molecular imprinted polymers (MIPs), using single templates (pentoxifylline, caffeine and theophylline) and mixed-templates (pentoxifylline-caffeine, pentoxifylline-theophylline and caffeine-theophylline). The MIPs were prepared with methacrylic acid (MAA) as the monomer, ethylene glycol dimetharylate (EGDMA) as the crosslinker and 2,2'-azobis(isobutyronitrile) (AIBN) as the initiator. The obtained polymer particles (particle size after grinding was about 25-35 ${\mu}$m) were packed into a HPLC column (3.9 mm i.d. ${\times}$ 150 mm). The selectivity and chromatographic characteristics of the MIPs were studied using acetonitrile as the mobile phase at a flow rate of 0.8 mL/min. UV detector wavelength was set at 270 nm. Different single template MIPs showed different molecular recognitions to the templates and the structurally analogues, according to the rigidity and steric hindrance of the compounds. Recognition was improved on the mixed-template MIPs as a result of the cooperation or sum effect of the templates, whereas on the pentoxifylline-theophylline imprinted polymer, the highest selectivity and affinity were obtained. Separations of the test compounds on different polymers were also investigated.

• 보존과학회지
• /
• 제31권2호
• /
• pp.125-130
• /
• 2015

전통 칠기의 보존처리에 있어 수리 복원 기술이나 재료 등에 관한 명확한 기록이나 전승이 제대로 이루어지지 않고 있다. 본 연구는 목칠기 보존처리 중 하지층 복원에 사용되는 충진제의 기초적인 특성을 비교하여 칠기 하지층 복원시 적합한 재료를 선택적으로 사용하는데 목표를 두고 있다. 토회와 3종의 첨가제를 혼합한 토회, 곡수를 사용하여 시료를 제작하여 건조속도, 색도, 내충격성, 연마도를 비교하였다. 건조 속도는 토회, 목분 혼합, 목탄분 혼합, 와분 혼합, 곡수, 맥칠 시료의 순이었으며, 상대적으로 토분의 비율이 많아질수록 건조속도는 빠르고, 표면의 균열이 심해졌다. 내충격성 또한 토분의 비율이 많아질수록 낮은 값을 보였다. 첨가제의 종류에 따른 차이는 크지 않았으며 곡수와 첨가제를 혼합한 시료 모두 상대적으로 높은 내충격성을 보였다. 연마도의 경우 토분의 양이 많아질수록 커지고, 목분과 목탄분을 혼합한 시료 역시 큰 연마도를 보였다. 맥칠과 곡수 시료는 가장 큰 연마도를 보였고 와분을 혼합한 시료의 경우 가장 낮은 연마도를 보였다.