• Korean Journal of Ecology and Environment
• /
• v.52 no.2
• /
• pp.171-177
• /
• 2019

Smart farm is a breakthrough technology that can maximize crop productivity and economy through efficient utilization of space regardless of external environmental factors. This study was conducted to investigate the optimal growth and physiological conditions of Chinese matrimony vine (Lycium chinense) with LED light sources in a smart farm. The light source was composed of red+blue and red+blue+white mixed light using a LED system. In the red+blue mixed light, red and blue colored LEDs were mixed at ratios of 1:1, 2:1, 5:1, and 10:1, with duty ratios varied to 100%, 99%, and 97%. The experimental results showed that the photosynthetic rate according to the types of light sources did not show statistically significant differences. Meanwhile, the photosynthetic rate according to the mixed ratio of the red and the blue light was highest with the red light and blue LED ratio of 1:1 while the water use efficiency was highest with the red and blue LED ratio of 2:1. The photosynthetic rate according to duty ratio was highest with the duty ratio of 99% under the mixed light condition of red+blue+white whereas the water use efficiency was highest with the duty ratio of 97% under the mixed light of red+blue LED. The results indicate that the light source and light quality for the optimal growth of Lycium chinense in the smart farm using the LED system are the mixed light of red+blue (1:1) and the duty ratio of 97%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.153-154
• /
• 2015

This study is alkali-activated slag-red mud soil mixed pavement of efflorescence characteristics analysis of mitigation measures is drawn to the red mud substitution rate in accordance with the alkali-activated slag-red mud soil mixed pavement of efflorescence characteristics were exhibited. As a result of alkali-activated slag-red mud soil mixed pavement is more substitution rate increases appeared to efflorescence is increased.

• Structural Engineering and Mechanics
• /
• v.50 no.5
• /
• pp.665-677
• /
• 2014

A numerical method, using a special mixed finite element associated with the virtual crack extension technique, has been developed to evaluate the energy release rate for kinking cracks. The element is two dimensional 7-node mixed finite element with 5 displacement nodes and 2 stress nodes. The mixed finite element ensures the continuity of stress and displacement vectors on the coherent part and the free edge effect. This element has been formulated starting from a parent element in a natural plane with the aim to model different types of cracks with various orientations. Example problems with kinking cracks in a homogeneous material and bimaterial are presented to assess the computational accuracies.

• Asian Journal of Turfgrass Science
• /
• v.13 no.1
• /
• pp.29-36
• /
• 1999

This study was conducted to make the utmost use of the good traits and to improve the poor traits of zoysiagrass through the production technology for mixed lines sod in addition to breeding. Mixed lines sod was produced by mixing broad or middle leaf line with narrow leaf line by volume, a ratio of 1 to 2. The mixed lines sod of zoysiagrass was superior to the single ling sod, which is used commonly, for the establishment rate, coverage rate, shoot density, texture, leaf color, dormancy period cnd color, and visual quality.

• IE interfaces
• /
• v.9 no.2
• /
• pp.39-45
• /
• 1996

This paper investigates the problems of grouping N products on an assembly line with an objective of maximizing the option grouping rate. Before developing a mixed model grouping algorithm, simulation studies are committed for developing operating rules and evaluating the layout production systems. A mixed model grouping algorithm is suggested and it is applied to the color selection lane in automobile production system, which reveals a high mixed model grouping rate.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.461-465
• /
• 1996

Position and rate control modes arc the two common modes for controlling remote manipulators with joysticks or hand controllers. Generally, position mode is easier for teleoperation than rate modes, when the manipulation work space is small or comparable to the human operator's control space. When the telemanipulator's work space is very large, human operator's control motion range must be large to allow telemanipulator's full range of motion resulting poor control resolution. One way to solve the poor resolution problem is to use indexing. However, rate mode can provide any higher degree of resolution without use of indexing. If two modes are mixed, master controller will be more convenient. The mixed mode algorithm, changes operating mode from position mode to rate mode or vise versa using fuzzy logic. The fuzzy logic algorithm, which has been designed to recognize the teleoperator's intended motion properly, provides an intelligence to a master controller.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.96-98
• /
• 2003

Many of research efforts have been focused on the improvement of critical current density Jc of silver-sheathed Bi-2223 tapes for practical applications of material. Bi-2223 superconducting wires with 55 filaments were fabricated by stacking, drawing process with different heat-treatment histories. After rolling process, Bi-2223 tapes were heat-treatment at 780~826$^{\circ}C$ with variable mass flow rate of mixed gas. In this study, the effect of changes in the variable mass flow rate of mixed gas during the heat treatment of Bi-2223/Ag tapes has been investigated. Distinct differences were observed in the Bi-2223 phase and critical current as flow rate of mixed gas. We could achieve proper conditions of mass flow rate of mixed gas for Ag-alloy clad Bi-2223 superconducting tapes.

• Journal of Korean Society for Quality Management
• /
• v.30 no.4
• /
• pp.68-77
• /
• 2002

EM algorithm has good convergence rate for numerical procedures which converges on very small step. In the case of proportion estimation in a mixed distribution which has very big incomplete data or of update of new data continuously, however, EM algorithm highly depends on a initial value with slow convergence ratio. There have been many studies to improve the convergence rate of EM algorithm in estimating the proportion parameter of a mixed data. Among them, dynamic EM algorithm by Hurray Jorgensen and Titterington algorithm by D. M. Titterington are proven to have better convergence rate than the standard EM algorithm, when a new data is continuously updated. In this paper we suggest dynamic EM algorithm and Titterington algorithm for the estimation of a mixed Poisson distribution and compare them in terms of convergence rate by using a simulation method.

• Journal of Welding and Joining
• /
• v.15 no.2
• /
• pp.72-80
• /
• 1997

The spatter generation rate of GMA welding with $CO_2$ gas shielding was measured with the change of welding conditions such as wire feeding rate and welding voltage and then the results were analized with the accompanying changes in metal transfer mode and in bead geometry. The spatter generation rate (SGR) was relatively low not only wit the short circuit transfer but with the truely globular transfer mode. However, the SGR resulted with the mixed mode were consistantly high. The resultant wave pattern of mixed mode was due to the coexistance of short-circuit and globular transfer and characterized by the frequent appearance of instantaneous short circuit. Considering the result of SGR and that of bead geometry, it could be concluded that when the wire feeding rate (or welding current) was either low or high, the optimum bead shape could be obtained along with the low spatter generation. However, in the middle range of wire feeding rate, the optimum bead shape was only obtained in the mixed mode condition resulting in the high spatter generation.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.123-128
• /
• 2010

The continuous transesterification of mixed fat was done on the plug flow reactor packed with the static mixers. The transesterification using 0.5 wt% KOH, 0.8 wt% TMAH and mixed catalyst[40 v/v% KOH(0.5 wt%)+60 v/v% TMAH(0.8 wt%)] was conducted with the changes of molar ratios, weight percentage of beef, flow rates and number of static mixer's elements at $65^{\circ}C$. The overall conversion of mixed fat at 1:8 molar ratio, 50 wt% of beef and 24 of static mixer's elements increased until 0.7mL/min of flow rate. The overall conversion of mixed fat showed 96% at those conditions. So, the optimum operating conditions on tublar reactor were 1:8 molar ratio, 50 wt% of beef, 0.7 mL/min of flow rate and 24 of static mixer' s elements.