• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.699-720
• /
• 1995

This study was conducted to evaluate the effect of benzalkonium chloride solution as a wetting agent instead of water on dentin bonding with NTG-GMA/BPDM system (All-bond 2, Bisco.) and DSDM system (Aelitebond, Bisco.). Benzalkonium chloride solution is a chemical disinfectant widely used in medical and dental clinics for preoperative preparation of skin and mucosa due to its strong effect of cationic surface active detergent. Eighty freshly extracted bovine lower incisor were grinded labially to expose flat dentin surface, and then were acid-etched with 10 % phosphoric acid for 15 second, water-rinsed, and dried for 10 second with air syringe. The specimens were randomly divided into 8 groups of 10 teeth. The specimens of control group were remoistured with water and the specimens of experimental groups were remoistured with 0.1 %, 0.5 %, and 1.0 % benzalkonium chloride solution respectively. And then, the Aelitefil composite resin was bonded to the pretreated surface of the specimens by use of All-bond 2 dentin bonding system or Aelitebond dentin bonding system in equal number of the specimens. The bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured, the mode of failure was observed, the fractured dentin surface were examined under scanning electron microscopy, and FT-IR spectroscopy was taken for the purpose of investigating the changes of the dentin surface pretreated with benzal konium chloride solution followed by each primer of the dentin bonding systems. The results were as follows : In the group of bonding with NTG-GMA/BPDM dentin bonding agent(All-bond 2), higher tensile bond strength was only seen in the experimental group remoistured with 0.1 % benzal konium chloride solution than that in water-remoistured control group(p<0.05). In the group of bonding with DSDM dentin bonding agent (Aelitebond), no significant differences were seen between the control and each one of the experimental group(p<0.05). Higher tensile bond strength were seen in NTG-GMAIBPDM dentin bonding agent group than in DSDM dentin bonding agent group regardless of remoistur ization with benzal konium chloride solution. On the examination of failure mode, cohesive and mixed failure were predominantly seen in the group of bonding with NTG-GMAIBPDM dentin bonding agent, while adhesive failure was predominantly seen in the group of bonding with DSDM dentin bonding agent. On SEM examination of fractured surfaces, no differences of findings of primed dentin surface between the groups with and without remoisturization with benzal konium chloride solution. FT-IR spectroscopy taken from the control and the experimental group reve::.led that some higher absorbance derived from the primers binding to dentin surface was seen at the group pretreated with 0.1 % benzal konium chloride solution than at the control group of remoisturizing with water.

• Korean Journal of Weed Science
• /
• v.5 no.1
• /
• pp.73-84
• /
• 1985

25 tank-mixed combinations between Haloxyfop-methyl at 0, 0.05, 0.1, 0.15 and 0.2 kg ae/ha and Acifluorfen at 0, 0.082, 0.163, 0.245 and 0.326 kg ai/ha were applicated at post-emergence on the late-season cropped soybean(Glycine max) fields predominated by grasses and assessed on the weeding efficacy. A most abundant weed species on the experimented fields were found at September (25 species). The broadleaved weed species and sedges were successively and proportionately emerged by the control rate of grass species. From the mono-treatment of each herbicide, Haloxyfop-methyl was recognized as a highly selective one between grasses and soybean, and Acifluorfen between broadleaf weeds and soybean, respectively. By combined application with both herbicides a synergistic weeding efficacy was detected on total weed species, however antagonistic or additive on each weed groups. Among other traits of soybean, stem dry weight was influenced by weed competitions during October, number of pods per plant during August and seed yields during whole periods. For most effective and reasonable weeding, no less than 0.4 kg ai/ha of each herbicides should be applicated in combinations.

• Korean Journal of Organic Agriculture
• /
• v.23 no.3
• /
• pp.549-565
• /
• 2015

This study was conducted to investigate the growth characteristics and functional materials of baby vegetables as affected by different LEDs and luminous intensity at Anseongsi, Gyeonggi Province, in 2014. Test crops were beet, chicory, spinach, red leaf lettuce, crown daisy and red mustard purchased from the seed company of Dongbu Hannong and Jinheung. Growth characteristics were measured and the content of functional materials was analyzed 40 days after seeding at plug plate. Treatment of Red+Blue (4:1) at $150{\mu}mol\;m^{-2}s^{-1}$ luminous intensity showed the highest number of leaves in five baby vegetables of beet, chicory, red leaf lettuce, crown daisy and red mustard. The highest shoot length of chicory, spinach, red leaf lettuce, crown daisy and red mustard was obtained from the treatment of Red+Blue (4:1) at $150{\mu}mol\;m^{-2}s^{-1}$ luminous intensity. Fresh weight and dry weight of all six baby vegetables were the highest in treatment of Red+Blue (4:1) at $150{\mu}mol\;m^{-2}s^{-1}$ luminous intensity. Content of chlorophyll a and chlorophyll b of spinach, red leaf lettuce and red mustard showed the highest in Fluorescent lamp at $150{\mu}mol\;m^{-2}s^{-1}$ luminous intensity whereas other crops did not show definite trend under different LEDs lights and luminous intensity. The highest total content of anthocyanins and polyphenol were obtained from the treatment of Red+Blue (4:1) at $150{\mu}mol\;m^{-2}s^{-1}$ luminous intensity in all six baby vegetables. Free radical scavenging activity was highest in all six vegetable crops at $150{\mu}mol\;m^{-2}s^{-1}$ luminous intensity, but it was not different significantly between LEDs. As a result, the growth and the content of functional material of baby vegetables are generally to be increased in Red+Blue (4:1) at $150{\mu}mol\;m^{-2}s^{-1}$ luminous intensity. Mixed light of Red+Blue is thought to give good effect on the growth and the content of functional material in baby vegetable crops. Because there are many differences in regard of LED lights, crop varieties, cultivation and experimental methods in their impact on the growth and functional materials of baby vegetables among researchers, it is considered that a more precise studies are needed for the crop responses to LED light and luminous intensity.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.767-774
• /
• 1998

This study has been carried out to measure the amount of the daily intake by Korean on preservatives (Dehydroacetic acid, Benzoic acid and ρ-Hydroxybenzoic acid asters) in foods. The amounts of preservatives were determined by HPLC in foods such as butter, cheese, margarine, aloe gel, carbonated beverages, mixed beverage, ginseng beverage, red ginseng drink, soy sauce, fruit and vegetable juices (except unheated fruit-vegetable juice), vineger, seasonings, fruit and vegetables only on the peel, fruit wine, rice wine and unrefined rice wine. The recovery ranges were found to be 99.2% for dehydroacetic Acid, 95.8% for benzoic acid and $94.2{\sim}97.2%$ for ${\rho}-hydroxybenzoic$ acid in foods, respectively. The data of average food intake for each food items per capita per day were obtained from the report of national nutrition survey carried by the Ministry of Health and Welfare in 1997. The detected number of samples and average intake range of preservatives have been figured cut to $ND{\sim}290.0{\;}ppm$ for dehydroacetic acid, $ND{\sim}400.0{\;}ppm$ for benzoic acid and $ND{\sim}93.9{\;}ppm$ for ${\rho}-hydroxybenzoic$ acid esters, respectively. Estimated daily intake (EDI) of each additives per capita per day were shown as follows; 1.56 mg for dehydroacetic acid, 2.25 mg for benzoic acid and 0.44 mg for ${\rho}-hydroxybenzoic$ acid esters in total respectively and these values were evaluated to be much lower than that of FAO/WHO's acceptable daily intake (ADI) $0{\sim}5{\;}mg/kg$ b.w./day for benzoic acid and $0{\sim}10{\;}mg/kg$ b.w./day for ${\rho}-hydroxybenzoic$ acid esters.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.361-364
• /
• 2002

This study was performed to establish a simple and accurate method for the determination of oxygen that is a processing aid in various beverage. The quantitative determination of dissolved oxygen (DO) contents in 30 cases of samples were performed by traditional titration method and polarography. As a result of the study, the analysis of DO contents in fruit-extract beverages containing oxygen by titration method was time consuming and large sample volumes were needed. Besides, serious interferences with compounds such as hydroxylamine and nitric oxide were observed, leading to false response. Although the polarography is easily affected by $H_2S$, proteins, and various organic compounds, it is a simple and practical method that provides inexpensive and relatively rapid analysis. The polarography is best suited to the routine determination of DO in a large number of samples and it is expected that the polarography can directly be applied to the quality control of the beverages containing added oxygen. The analysis results of DO contents in various fruit-extract beverages with oxygen and without oxygen were as follows: 23.10 ppm to 32.60 ppm for various frutis extract beverages with oxygen, 0.70 pp to 2.54 ppm for mixed beverages without oxygen, 7.63 ppm to 8.28 ppm for drinking water.

• Restorative Dentistry and Endodontics
• /
• v.30 no.1
• /
• pp.49-57
• /
• 2005

The purpose of this study was to evaluate the effect of multiple application of all-in-one dentin adhesive system on microtensile bond strength to caries-affected dentin. Twenty one extracted human molars with occlusal caries extending into mid-dentin were prepared by grinding the occlusal surface flat. The carious lesions were excavated with the aid of caries detector dye. The following adhesives were applied to caries-affected dentin according to manufacturer's directions; $Scotchbond^{TM}$ Multi-Purpose in SM group, Adper Prompt $L-Pop^{TM}$ 1 coat in LP1 group, 2 coats in LP2 group, 3 coats in LP3 group, $Xeno^{(R)}$ III 1 coat in XN1 group, 2 coats in XN2 group. and 3 coats in XN3 group. After application of the adhesives, a cylinder of resin-based composite was built up on the occlusal surface. Each tooth was sectioned vertically to obtain the $1{\times}1\;mm^2$ sticks. The microtensile bond strength was determined. Each specimen was observed under SEM to examine the failure mode. Data were analyzed with one-way ANOVA. The results of this study were as follows; 1. The microtensile bond strength values were; SM ($14.38{\pm}2.01$ MPa), LP1 ($9.15{\pm}1.81$ MPa), LP2(14.08{\pm}1.75$ MPa), LP3 ($14.06{\pm}1.45$ MPa). XN1 (13.65{\pm}1.95$ MPa). XN2 ($13.98{\pm}1.60$) MPa, XN3 ($13.88{\pm}1.66$) MPa, LP1 was significantly lower than the other groups in bond strength (p < 0.05). All groups except LP1 were not significantly different in bond strength (p > 0.05). 2. In LP1, there were a higher number of specimens showing adhesive failure. Most specimens of all groups except LP1 showed mixed failure.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.453-462
• /
• 1998

Macrobenthic community structure was studied at thirteen stations in Taebudo subtidal area, Korea, from July to October 1996. Triple macrobenthos samples were collected using a van Veen grab (0.1 $m^2$) at each station during the study period. A total of 209 species of macrobenthos was sampled with a mean density of 1,093 ind./$m^2$ and biomass of 134,86 g/$m^2$. Of these, there were 72 species of polychaetes ($34.5\%$), 69 crustaceans ($33.0\%$) and 49 molluscs ($23.4\%$). Polyalaetes were represented as a density-dominant faunal group with a mean density of 608 ind./$m^2$, comprising $55.6\%$ of the total benthic animals. It was followed by crustaceans with 307 ind./$m^2$($28.1\%$ of the total density), Echinoderms were represented as a biomass-dominant faunal group with a mean biomass of 54.21 g/$m^2$($40.2\%$ of total biomass). Total number of species and diversity were low in the inner part of the study area with high mud content and high in the offshore stations of mixed sediments. Major dominant species were three polychaetes, Heteromastus filifomis, Scoloplos armiger and Tharyx sp. whose mean densities were 70 ind./$m^2$, 67 ind./$m^2$, and 66 ind./$m^2$, respectively. Cluster analysis showed that the study area could be divided into five stational groups based on the faunal composition, that is, the innermost stations, coastal stations, transitional stations and two offshore station groups. The species diversity of these groups increased from the inner stational group toward the outer groups.

• The Journal of Art Theory & Practice
• /
• no.5
• /
• pp.217-229
• /
• 2007

Many historical research and facet about modern art in Indonesia which formulating background of contemporary Indonesian Art. Indonesian art critic Sanento Yuliman states that Modern art has been rapidly developing in Indonesia since the Indonesian Independence in 1945. Modern Art is a part of the super culture of the Indonesian metropolitan and is closely related to the contact between the Indonesian and Western Cultures. Its birth was part of the nationalism project, when the Indonesian people consists of various ethnics were determined to become a new nation, the Indonesian nation, and they wished for a new culture, and therefore, a new art. The period 1960s, which was the beginning of the creation and development of the painters and the painters associations, was the first stage of the development of modern art in Indonesia. The second stage showed the important role of the higher education institutes for art. These institutes have developed since the 1950s and in the 1970s they were the main education institutes for painters and other artists. The artists awareness of the medium, forms or the organization of shapes were encouraged more intensely and these encouraged the exploring and experimental attitudes. Meanwhile, the information about the world's modern art, particularly Western Art; was widely and rapidly spread. The 1960s and 1970s were marked by the development of various abstractions and abstract art and the great number of explorations in various new media, like the experiment with collage, assemblage, mixed media. The works of the Neo Art Movement-group in the second half of the 1970s and in the 1980s shows environmental art and installations, influenced by the elements of popular art, from the commercial world and mass media, as well as the involvement of art in the social and environmental affairs. The issues about the environment, frequently launched by the intellectuals in the period of economic development starting in the 1970s, echoed among the artists, and they were widened in the social, art and cultural circles. The Indonesian economic development following the important change in the 1970s has caused a change in the life of the middle and upper class society, as has the change in various aspects of a big city, particularly Jakarta. The new genre emerged in 1975 which indicates contemporary art in Indonesia, when a group of young artists organized a movement, which was widely known as the Indonesian New Art Movement. This movement criticized international style, universalism and the long standing debate on an east-west-dichotomy. As far as the actual practice of the arts was concerned the movement criticized the domination of the art of painting and saw this as a sign of stagnation in Indonesian art development. Based on this criticism 'the movement' introduced ready-mades and installations (Jim Supangkat). Takes almost two decades that the New Art Movement activists were establishing Indonesian Installation art genre as contemporary paradigm and influenced the 1980's gene ration like, FX Harsono, Dadang Christanto, Arahmaiani, Tisna Sanjaya, Diyanto, Andarmanik, entering the 1990's decade as "rebellion period" ; reject towards established aesthetic mainstream i.e. painting, sculpture, graphic art which are insufficient to express "new language" and artistic needs especially to mediate social politic and cultural situation. Installation Art which contains open possibilities of creation become a vehicle for aesthetic establishment rejection and social politics stagnant expression in 1990s. Installation art accommodates two major field; first, the rejection of aesthetic establishment has a consequences an artists quest for medium; deconstruction models and cross disciplines into multi and intermedia i.e. performance, music, video etc. Second aspect is artists' social politic intention for changes, both conclude as characteristics of Indonesian Installation Art and establishing the freedom of expression in contemporary Indonesian Art until today.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.243-256
• /
• 2018

The purpose of this study was to investigate the effects of the anodization and cyclic calcification treatment on the surface characteristic and bioactivity of the titanium thin sheet in order to obtain basic data for the production of bioactive titanium membrane. A $30{\times}20{\times}0.08mm$ titanium sheets were prepared, and then they were pickled for 10 seconds in the solution which was mixed with $HNO_3:HF:H_2O$ in a ratio of 12: 7: 81. The $TiO_2$ nanotube layer was formed to increase the specific surface area of the titanium, and then the cyclic calcification treatment was performed to induce precipitation of hydroxiapatite by improvement of the bioactivity. The corrosion resistance test, wettability test and immersion test in simulated body solution were conducted to investigate the effect of these surface treatments. The nanotubes formed by the anodization treatment have a dense structure in which small diameter tubes are formed between relatively large diameter tubes, and their inside was hollow and the outer walls were coupled to each other. The hydroxyapatite precipitates were well combined on the nanotubes by the penetration into the nanotube layer by successive cyclic calcification treatment, and the precipitation of hydroxyapatite tended to increase proportionally after immersion in simulated body solution as the number of cycles increased. In conclusion, it was confirmed that induction of precipitation of hydroxyapatite by cyclic calcification treatment after forming the nanotube $TiO_2$ nanotube layer on the surface of the titanium membrane can contribute to improvement of bioactivity.

• Review of Culture and Economy
• /
• v.21 no.2
• /
• pp.141-173
• /
• 2018

In this article, we explore how artistic fame is formed by analyzing antecedents of fame the extent to which the name of an actor or his/her work is positively known by his/her audiences among Korean handicraft artists. Drawing on prior literature on reputation and fame, we clarify the differences between the concept of reputation and the concept of fame and further distinguish three types of reputation among individual artists, depending on its sources expert reputation, market reputation, and peer reputation. We employ the mixed method in this study, in which we first conducted open-end interviews with three kinds of constituents (i.e., critics, market intermediaries, and artists) and then developed and tested the hypotheses derived from the insights we had obtained from the interviews. We further considered the impact of reputational work, defined as the level of effort devoted and activities performed by an artist him(her)self geared toward promoting his(her) work, on artistic fame. We find that there are large differences in factors associated with artistic fame between non elite and elite Korean handicraft artist groups, where elite status is captured by artists' educational background (i.e., Seoul National University and Hongik University, which are considered elite schools in accordance with prior research). Specifically, findings suggest that among non elite status artists, recognition by experts, or what we call expert reputation, acquired through national awards and invitations from prominent exhibitions as well as artists' own reputational work that incurs high cost, such as self-financed exhibition openings, were shown to be highly significant factors associated with artistic fame, which was measured as the number of media exposures related to her/his art work. By contrast, among elite status artists, peer reputation acquired through an artist's institutional affiliations and relatively low cost artists' own reputational work, such as self listing on a highly publicized magazine, were shown to be significant factors associated with fame. Taken together, this paper contributes to research on cultural industries and markets by highlighting the importance of understanding artistic fame not just as the outcome of her/his talent but as the social product that arises at the intersection of actors (artists) and her/his audiences in the social evaluation process.