• Korean Journal of Environmental Agriculture
• /
• v.29 no.1
• /
• pp.20-26
• /
• 2010

This study was conducted to reclassify Donggui series based on the second edition of Soil Taxonomy and to discuss the formation of Donggui series in Jeju Island. Morphological properties of typifying pedon of Donggui series were investigated and physico-chemical properties were analyzed according to Soil survey laboratory methods manual. The typifying pedon has very dark grayish brown (10YR 3/2) silt loam A horizon (0~17 cm), gravelly very dark grayish brown (10YR 3/2) silt loam BA horizon (17~42 cm), gravelly very dark grayish brown (10YR 3/2) silty clay loam Bt1 horizon (43~80 cm), brown (7.5YR 4/6) silty clay Bt2 horizon (80~105 cm), and brown (10YR 5/4) silty clay Bt3 horizon (105~150 cm). It is developed in lava plain and are derived from basalt and pyroclastic materials. The typifying pedon contains 1.3~2.1% oxalate extractable (Al + 1/2 Fe), less than 85% phosphate retention, and higher bulk density than 0.90 $Mg/m^3$. That can not be classified as Andisol. But it has an argillic horizon from a depth of 22 to 150 cm and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. That can be classified as Ultisol, not as Andisol and Inceptisol. It has udic soil moisture regime, and can be classified as Udalf. Also that meets the requirements of Typic Hapludalf. It has 18-35% clay at the particle-size control section, and have thermic soil temperature regime. Therefore Donggui series can be classified as fine loamy, mixed, thermic family of Typic Hapludalfs, not as fine silty, mixed, thermic family of Dystric Eutrudepts.

• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.33-43
• /
• 2016

Pinellia tripartita(Blume) Schott is a herbaceous perennial plant belonging to the Araceae and distributed on Asia including of Korea, Japan, and China. P. tripartita is often used for gardening but has not been developed mass-breeding methods. In this study, we compared the tuber growth in different combinations of mixed soils used six compositions. Tubers used to study was cultured in vitro and divided into two groups. Type I was diameter more than 1cm and the group of Type II was diameter below than 1cm. Enlargement of tubers and growth of aerial parts were measuring the plant height, number of fresh leaves and dead leaves, number of bullets, tuber size, and fresh / dry weight. The size/weight and numbers of tubers from the mixed soil B (coir 68.0%, peat moss 14.7%, perlite 3.0%, vermiculite 7.0% and zeolite 7.0%) were the best grown up for eight weeks. In case of Type I, GI (Growth index) of tuber size and weight were 45% and 101%, respectively. The difference of growth was doubled compared to the bad growth treatment as the mixed soil E(Coir 14.3%, peat moss 14.3%, perlite 42.9%, vermiculite 14.3%, and zeolite 14.3%). These results could be used as the basic information for the similar experimental design for the P. ternata.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.1
• /
• pp.1-15
• /
• 2021

Additive manufacturing (AM) for dental materials can produce more complex forms than conventional manufacturing methods. Compared to milling processing, AM consumes less equipment and materials, making sustainability an advantage. AM can be categorized into 7 types. Polymers made by vat polymerization are the most suitable material for AM due to superior mechanical properties and internal fit compared to conventional self-polymerizing methods. However, polymers are mainly used as provisional restoration due to their relatively low mechanical strength. Metal AM uses powder bed fusion methods and has higher fracture toughness and density than castings, but has higher residual stress, which requires research on post-processing methods to remove them. AM for ceramic use vat polymerization of materials mixed with ceramic powder and resin polymer. The ceramic materials for AM needs complex post-processing such as debinding of polymer and sintering. The low mechanical strength and volumetric accuracy of the products made by AM must be improved to be commercialized. AM requires more research to find the most suitable fabrication process conditions, as the mechanical properties and surface of any material will vary depending on the processing condition.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.423-429
• /
• 2022

This study is a study on the perceptions of pre-primary early childhood teachers on teaching and learning methods for infants and toddlers in the early childhood teacher training process. This is a mixed study using word cloud analysis and qualitative case analysis on the subject, focusing on literature research and understanding of pre-primary early childhood teachers' 'teaching and learning methods for infants and toddlers'. The purpose of this study was to find out the meaning of a early childhood teacher through thoughts on teaching and learning methods for infants, difficulties, points to be learned, teaching competency to be good as a teacher, and experiences for teaching professionalism. Through the results of this study, it is expected to find a way to increase their sense of efficacy on teaching and learning methods when conducting classes for young children in the future, and to provide basic data for improving the quality of early childhood education.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.1
• /
• pp.77-93
• /
• 2021

Objective : The purpose of this study was to investigate the lifestyle changes in patients with COVID-19 and their effects on health and the quality of life. Methods : A mixed study method was used for 15 confirmed cases admitted to residential treatment centers in September 2020. The YLP was used to evaluate the lifestyle patterns, and the Korean version of WHOQOL-BREF, MSBS-8, ISI-K, and PHQ-9 were used to analyze health and quality of life before and after COVID-19. The results obtained through in-depth interviews were analyzed using Colaizzi's thematic analysis. Results : YLP (p<.01), WHOQOL-BREF (p<.01), MSBS-8 (p<.01), and ISI-K (p=.05) showed statistically significant differences between the assessment outcomes before and after COVID-19. In addition, 179 meaningful statements, 14 sub-themes, 11 themes, and 3 categories were elicited. The final 3 categories are the emotions of the confirmed cases, the experiences in residential treatment centers and the needs from the perspective of the confirmed cases. Conclusion : There are negative effects on lifestyle, health, and quality of life on confirmed cases. In response, the confirmed cases requested several activities and counseling. Therefore, it is necessary to develop a program to improve the lifestyle, quality of life, and health of asymptomatic cases and cases with mild symptoms.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.375-382
• /
• 2015

We classified the forest type and figured out the ecological characteristics for each of the types in order to provide the basic informations for being induced ecologically efficient forest practice plan by vegetation units in the natural forest of Songnisan. We established the 250 sample points and collected the vegetation data of vertical distribution for each sample. A variety of multivariate statistical methods were applied to classify the forest types. The species diversity index were analyzed to estimate the stability and maturity for forest vegetation in each the type. The types were divided from two to ten clusters by cluster analysis. The appropriate number of clusters was estimated five clusters by indicator species analysis. It was verified through the multiple discriminant analysis that the estimated number of clusters had been suitable. Based on the species composition for each the type, this study site was classified into five forest types: 1) Quercus serrata and 2) mixed mesophytic forest in the valley area, 3) Q. mongolica forest in the main ridge, 4) Pinus densiflora forest in the sub-ridge extending from the main, and 5) Q. variabilis-P. densiflora forest between the sub-ridge and valley. The species diversity index of the pine forest that had been a simple species composition was the lowest while that of the mixed mesophytic forest of which the composition had been diverse was the highest. As the forest vegetation was more varied, the index showed a tendency to increase.

• Journal of the Korean Society for Library and Information Science
• /
• v.53 no.4
• /
• pp.255-283
• /
• 2019

The purpose of this study is to identify the factors affecting job burnout by analyzing the job burnout patterns and levels in teacher librarians and to empirically investigate the relationship among the effective factors. For qualitative research 17 teacher librarians were intentionally chosen and in-depth interview was conducted from September 5, 2018 to October 30, 2018. The in-depth interview shows that the factors affecting the job burnout of teacher librarians are the sense of belonging, professional identity, professional development opportunities, reputation of teacher librarians, social support and job engagement which defined as librarians' job specificity. For the reliability and validity of the measurement tools, six teacher librarians were primarily investigated from December 5, 2018 to December 7. After that a survey was carried out through the web questionnaire for two weeks from December 20, 2018 to January 3, 2019. A total of 305 copies were collected, all of which were used for the analysis. The results of the quantitative study are summarized as follows. First, concerning the job specificity of teacher librarians, the factors affecting job burnout were professional identity, reputation of teacher librarians, and social support. Second, concerning the job specificity of teacher librarians, the factors affecting job engagement were sense of belonging, professional identity, and social support. Third, as a result of verifying the mediating effect of job engagement in relation to job specificity and job burnout of teacher librarians, professional identity showed complete mediating effect and social support showed partial mediation effect.

• 한국노년학
• /
• v.37 no.4
• /
• pp.853-870
• /
• 2017

This study examined the changes of depression and life satisfaction among the elderly living together in group-home and congregate housing. And in this course, it was to verify the practical effects of the recent government and local authority community life of elderly people by comparing them with the groups of elders living alone. The study was divided into Time 1 and Time 2, and 205 person's data were used for the final analysis. PASW Statistics 18.0 was utilized to analysis the data of this study, because it is difficult to explain the results of this analysis, secondary qualitative research has been used to identify additional contextual information. The major results of this study are as follows. First, the depression of the subjects was significantly improved in the case of living in group-home and congregate housing, and it was significantly worse in the group of elders living alone. Second, the life satisfaction of survey subjects was significantly improved when living in congregate housing, group-home was significantly worse, and the group of elders living alone were not statistically significant but slightly worse. Third, mixed research methods were applied to make accurate interpretation of changes of life satisfaction of the elderly living in group-home. Based on the results of this study, it is possible to establish appropriate measures for the elderly to improve early adjustment and quality of life in community life. And the community life of the elderly can contribute to a real social safety net by solving the blind spot of welfare. At the national level, it can be utilized as a standard reference to improve and strengthen existing policies by providing data that can simultaneously examine the performances and problems of various policies related to housing or the welfare of the elderly.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.532-544
• /
• 2023

Purpose: To identify and evaluate the risk of chemical fire causative substances by using thermal analysis methods (DSC, TGA) for the hazards and physical property changes that occur when newly used biofuels are mixed with existing fuels It is to use it for identification and evaluation of the cause of fire by securing data related to the method and the hazards of the material according to it. Method: The research method used in this experiment is the differential scanning calorimeter (DSC: Difference in heat flux) through quantitative information on the caloric change from the location, shape, number, and area of peaks. flux) was measured, and the weight change caused by decomposition heat at a specific temperature was continuously measured by performing thermogravimetric analyzer (TGA: Thermo- gravimetric Analyzer). Result: First, in the heat flux graph, the boiling point of the material and the intrinsic characteristic value of the material or the energy required for decomposition can be checked. Second, as the content of biodiesel increased, many peaks were identified. Third, it was confirmed through analysis that substances with low expected boiling points were contained. Conclusion: It was shown that the physical risk of the material can be evaluated by using the risk of biodiesel, which is currently used as a new energy source, through various physical and chemical analysis techniques (DSC + TGA).In addition, it is expected that the comparison of differences between test methods and the accumulation and utilization of know-how on experiments in this study will be helpful in future studies on physical properties of hazardous materials and risk assessment of materials.

• Current Research on Agriculture and Life Sciences
• /
• v.33 no.1
• /
• pp.19-24
• /
• 2015

Due to various environmental changes, the current location of the Gyeongsangbuk-do Agricultural Research & Extension Services needs to be changed to provide an appropriate environment and ecosystem for agricultural research and the efficient provision of public services. Accordingly, this study proposes a standard for selecting the new location. First, the location theory for the transfer of public facilities is investigated, and candidate filtration methods considered for the location selection. The candidate filtration methods include a component inspection, branch shape analysis, and mixed analysis. This study uses a component inspection, where the component criteria include the economic feasibility and ease of development, accessibility and convenience, agricultural conditions, soil conditions, connectivity, fairness, and human resource-richness of the region.