• Computers and Concrete
• /
• v.32 no.2
• /
• pp.185-206
• /
• 2023

This article aimed to explore the optimization of mineral admixtures and retarding admixture for high-performance concrete. In essence, fresh concrete can be regarded as a mixture in which both coarse and fine aggregates are suspended in a cement-based matrix paste. Based on this view, the test procedure was divided into three progressive stages of binder paste, mortar, and concrete to explore their rheological behavior and mechanical properties respectively. At each stage, there were four experimental control factors, and each factor had three levels. In order to reduce the workload of the experiment, the Taguchi method with an L9(3⁴) orthogonal array and four controllable three-level factors was adopted. The test results show that the use of the Taguchi method effectively optimized the composition of high-performance concrete. The slump of the prepared concrete was above 18 cm, and the slump flow was above 50 cm, indicating that it had good workability. On the other hand, the 28-day compressive strength of the hardened concretes was between 31.3-59.8 MPa. Furthermore, the analysis of variance (ANOVA) results showed that the most significant factor affecting the initial setting time of the fresh concretes was the retarder dosage, and its contribution percentage was 62.66%. On the other hand, the ANOVA results show that the most significant factor affecting the 28-day compressive strength of the hardened concretes was the water to binder ratio, and its contribution percentage was 79.05%.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.103-114
• /
• 2011

Usage of bicycle has been supported the universal reduction of energy consumption and $CO_2$. For the same purpose, new constructions for long length bike roads are planned in Korea. Recently, laboratory tests of physical properties and resistance against environmental loading about optimum mix design of roller compacted concrete, that have advantages of high structural performance by cement hydration and aggregate interlocking, simple construction procedure and low construction cost, are performed for the effective construction of new bike roads. However, properties of roller compacted concrete had different results between laboratory and field tests since it had different compaction method. Also, construction method of roller compacted concrete are not defined for the application of bike roads since it had different demand performance such as thin pavement thickness, low strength and etc with road pavements. Thus, in this experimental research was launched to evaluate the core properties, visual inspection, compaction ratio, water content, thickness reduction rate of roller compaction, skid resistance and roughness by experimental construction about variable mix proportion and compaction method based on laboratory test results. And construction method of roller compacted concrete pavement were suggested for the application of bike roads.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.49-58
• /
• 2014

PURPOSES : In areas of high traffic volume, such as expressway across large cities, the amount of nitrogen oxides (NOx) emitted into the atmosphere as air pollution can be significant since NOx gases are the major cause of smog and acid rain. Recently, the importance of NOx removal has arisen in the world. Titanium dioxide ($TiO_2$), that is one of photocatalytic reaction material, is very efficient for removing NOx. The NOx removing mechanism of $TiO_2$ is the reaction of solar photocatalysis. Therefore, $TiO_2$ in road structure concrete need to be contacted with ultraviolet rays (UV) to be activated. In general, $TiO_2$ concretes are produced by replacement of $TiO_2$ as a part of concrete binder. However, considerable portion of $TiO_2$ in concrete cannot contact with the pollutant in the air and UV. Therefore, $TiO_2$ penetration method using the surface penetration agents is attempted as an alternative in order to locate $TiO_2$ to the surface of concrete structure. METHODS : This study aimed to evaluate the NOx removal efficiency of photocatalytic concrete due to various $TiO_2$ application method such as mix with $TiO_2$, surface spray($TiO_2$ penetration method) on hardened concrete and fresh concrete using surface penetration agents. The NOx removal efficiency of $TiO_2$ concrete was confirmed by NOx Analyzing System based on the specification of ISO 22197-1. RESULTS : The NOx removal efficiency of mix with $TiO_2$ increased from 11 to 25% with increasing of replacement ratio from 3 to 7%. In case of surface spray on hardened concrete, the NOx removal efficiency was about 50% due to application amount of $TiO_2$ with surface penetration agents as 300, 500 and 700g/m2. The NOx removal efficiency of surface spray on fresh concrete due to all experimental conditions, on the other hand, which was very low within 10%. CONCLUSIONS : It was known that the $TiO_2$ penetration method as surface spray on hardened concrete was a good alternative in order to remove the NOx gases for concrete road structures.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.481-490
• /
• 2012

Evaluation of chloride penetration is very important, because induced chloride ion causes corrosion in embedded steel. Diffusion coefficient obtained from rapid chloride penetration test is currently used, however this method cannot provide a correct prediction of chloride content since it shows only ion migration velocity in electrical field. Apparent diffusion coefficient of chloride ion based on simple Fick's Law can provide a total chloride penetration magnitude to engineers. This study proposes an analysis technique to predict chloride penetration using apparent diffusion coefficient of chloride ion from neural network (NN) algorithm and time-dependent diffusion phenomena. For this work, thirty mix proportions with the related diffusion coefficients are studied. The components of mix proportions such as w/b ratio, unit content of cement, slag, fly ash, silica fume, and fine/coarse aggregate are selected as neurons, then learning for apparent diffusion coefficient is trained. Considering time-dependent diffusion coefficient based on Fick's Law, the technique for chloride penetration analysis is proposed. The applicability of the technique is verified through test results from short, long term submerged test, and field investigations. The proposed technique can be improved through NN learning-training based on the acquisition of various mix proportions and the related diffusion coefficients of chloride ion.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.331-341
• /
• 2015

The main purpose of this study is reducing the cost and effort for characterization of tensile strength of fiber reinforced concrete, in order to use in structural design. For this purpose, in this study, test for fiber reinforced concrete was carried out. Because fiber reinforced concrete is consisted of diverse material, it is hard to define the correlation between mix proportions and strength. Therefore, compressive strength test and tensile strength test were carried out for the range of smaller than 100 MPa of compressive strength and 0.25~1% of steel fiber volume fraction. as a results of test, two types of tensile strength were highly affected by compressive strength of concrete. However, increase rate of tensile strength was decreased with increase of compressive strength. Increase rate of tensile strength was decreased with increase of fiber volume fraction. Database was constructed using previous research data. Because estimation equations for tensile strength of fiber reinforced concrete should be multiple variable function, linear regression is hard to apply. Therefore, in this study, we decided to use the ANN(Artificial Neural Network). ANN was constructed using multiple layer perceptron architecture. Sigmoid function was used as transfer function and back propagation training method was used. As a results of prediction using artificial neural network, predicted values of test data and previous research which was randomly selected were well agreed with each other. And the main effective parameters are water-cement ratio and fiber volume fraction.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.419-426
• /
• 2015

The purpose of this study is to investigate experimentally the optimum mix design and site application case of soil mixing wall (SMW) method which is cost-effective technique for construction of walls for cutoff wall and excavation support as well as for ground improvement before constructing LNG storage tank typed under-ground. Considering native soil condition in site, main materials are selected ordinary portland cement, bentonite as a binder slurry and also it is applied $1,833kg/m^3$ as an unit volume weight of native soil, Variations for soil mixing wall are as followings ; (1) water-cement ratio 4cases (2) mixing velocity (rpm) 3levels (3) bleeding capacity and ratio, compressive strength in laboratory and site application test. As test results, bleeding capacity and ratio are decreased in case of decreasing water-cement ratio and increasing mixing velocity. Required compressive strength (1.5 MPa) considering safety factors in site is satisfied with the range of water-cement ratio 150% below, and test results of core strength are higher than those of specimen strength in the range of 8~23% by actual application of element members including outside and inside in site construction work. Therefore, optimum mix design of soil mixing wall is proposed in the range of unit cement $280kg/m^3$, unit bentonite $10kg/m^3$, water-cement ratio 150% and mixing velocity 90rpm and test results of site application case are satisfied with the required properties.

• Herbal Formula Science
• /
• v.28 no.4
• /
• pp.339-349
• /
• 2020

Objectives : Wiryeong-tang (WRT) is a traditional herbal medicine used to treat kidney-related diseases. However, the anti-inflammatory and anti-gastritis effect of Wiryeong-tang was not well known. Therefore, we experimented to confirmed the anti-inflammatory and anti-gastritis effects of Wiryeong-tang. Methods : The RAW 264.7 cells were pre treated with Wiryeong-tang mix soft extract (WRT-mse; 50, 100 and 200 ㎍/mL) for 1 hrs, and then incubated with lipopolysaccharide (LPS; 500 ng/mL). Cell viability was measured by the MTT method, and nitric oxide (NO) was measured with griess reagent. In addition, pro-inflammatory cytokines were measured by enzyme-linked immunosorbent assay (ELISA) and reverse transcription-polymerase chain reaction (RT-PCR). For anti-gastritis effect in vivo, acute gastritis was induced using 150 mM HCl/60% ethanol used ICR mice. WRT-mse (133 mg/kg) was pre treated for 3 days and then treated with 150 mM HCl/60% ethanol 1 hrs later. Then gastritis was observed and inflammatory cytokines in the gastric tissue was measured. Results : The 8 marker components of the WRT-mse were determined by simultaneous analysis using HPLC. WRT-mse was not toxic and inhibited pro-inflammatory cytokines such as IL-1β, IL-6 and TNF-α at NO production, protein and mRNA levels. Also, it was confirmed that WRT-mse improved bleeding and edema in gastritis, and suppresses inflammatory cytokines. Conclusion : In summary, our results suggest that the treatment of the WRT-mse reduced and improved the 150 mM HCl/60% ethanol induced acute gastritis and the inflammation caused by LPS stimulation in RAW 264.7 cells. Therefore, this study may provide useful drug or clinical evidence for WRT-mse to prevent inflammation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.1
• /
• pp.44-50
• /
• 2011

An immature tooth with infected pulp has numerous potential complications. Conventional apexification with calcium hydroxide has several disadvantages, including susceptibility to tooth fracture. This method does not promote continual root development. Pulp revascularization of a necrotic, immature permanent tooth will allow further development of the root and dentinal structure. Disinfection of the root canal system is a prerequisite for pulp revascularization and tissue regeneration. A combination of antibiotic drugs (ciprofloxacin, metronidazole, and minocycline) is effective for disinfection of necrotic pulp, and has been used successfully in regenerative endodontic treatment. These case reports involve the treatment of 3 immature permanent teeth with necrotic pulp using a 3-Mix paste and mineral trioxide aggregate. All cases showed the notable apical maturation with closure of the apex and increased thickness of dentinal walls. This approach suggests a paradigm shift in treating endodontically involved immature permanent teeth from the traditional apexification with calcium hydroxide to the conservative approach by providing a favorable environment for tissue regeneration.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.679-686
• /
• 2014

In this research, the mix proportion of the antiwashout underwater concrete with the mineral admixture was evaluated. It can reduce the amount used of the antiwashout admixture (hereinafter referred to as "AWA") and satisfy the properties of concrete. In addition, the review for the difference of the test and practical affairs were conducted. Optimized unit quantity of water of antiwashout underwater concrete and the amount used of AWA was revealed by $190kg/m^3$, 0.9%/W, respectively. In particularly, the mix design is reduced by 5% than the W/B of target strength even though the W and AWA reduced. Therefore, it will have the economical feasibility and qualities including the material separation, resistance characteristic and compressive strength, and etc. The stable value was shown in 1 point of minute passed in the measurement of the turbidity amounts using the turbidimeter after the checker insertion. However, it needs to be reviewed for the interrelationship between turbidity measuring machine and KCI-AD102 standard method. There were no significant differences of compressive strength of specimens in the water depending on the production methods.

• Korean Journal of Weed Science
• /
• v.13 no.1
• /
• pp.14-18
• /
• 1993

Greenhouse study was undertaken to find tank-mix feasibility of quinclorac with molinate and propanil, selective post-emergence herbicides in controlling barnyardgrass, for reducing the application rate of quinclorac. Following foliar application in combination of quinclorac at 0.038, 0.075, 0.150, and 0.300kg ai/ha with molinate at 0.190, 0.380, 0.750 and 1.500kg ai/ha, and propanil at 0.263, 0.525, 1.050, and 2.100kg ai/ha at 3.5-leaf stage of barnyardgrass, fresh weight and weeding efficacy and their interaction by Colby's efficacy method were evaluated. Percent inhibition of barnyardgrass growth by quinclorac, molinate and propanil at recommended rate were 78.1, 26.1, and 61.7%, respectively. The dose combination shown above 85% in weeding efficacy were from 0.300kg of quinclorac with 0.75kg of molinate and 0.150kg of quinclorac with all rates of propanil. Therefore, combination of quinclorac with molinate tended to additive interaction and that of quinclorac with propanil appeared partially synergistic interaction. Conclusively, for reducing the application rate of quinclorac, the combination of quinclorac with propanil was more synergistic than that of quinclorac with molinate.