• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.155-160
• /
• 1998

In this study, the estimation method of adiabatic temperature rise of concrete was developed by using hydration heat generation of mineral compounds of clinker and pozzolans. Specific heat considered the effects of mix proportion and temperature was calculated with experimental data. The adiabatic temperature rise calculated by developed method were compared with experiments in which many types of cement and admixtures were used. As the results of this study, it was found that the developed method could calculate adiabatic temperature rise of concrete accurately without the experiment.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1752-1757
• /
• 2008

Simple and highly efficient droplet merging method is proposed, which enables two nanoliter or picoliter droplets to merge regularly in a straight microchannel. We observe that two droplets of the same size but of different viscosities are merged by velocity difference induced as they are transported with the carrier fluid. To make viscosity difference, the mass ratio of water and glycerol is varied. Two droplets of the same size or of different sizes are generated alternatingly in the cross channel by controlling flowrates. This droplet merging method can be used to mix or encapsulate one target sample with another material, so that it can be applied to cell lysis, particle synthesis, drug discovery, hydrogel-bead production, and so on.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.1
• /
• pp.131-140
• /
• 2001

In general, the deterioration induced by the freezing and thawing cyclic in concrete structures often leads to the reduction in concrete durability by the cracking or surface spalling. If it can prediction of concrete deterioration subjected to cyclic freezing and thawing, we can rationally do the design of mix proportion in view of concrete durability and the maintenance management of concrete structures. Therefore in this study a prediction method of deterioration for concrete structures subjected to the irregular freezing and thawing is proposed from the results of accelerated laboratory freezing and thawing test using the constant temperature condition and the in-situ weathering data. Furthermore, to accurately predict the concrete deterioration, a method of modification for the effect of hydration increasing during rapid freezing and thawing test is investigated.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1077-1079
• /
• 2009

To minimize the variance in the quantification of solid-state phases in powder samples, gently placing polycrystalline samples one next to another directly in a sample holder is better than trying to mix them homogeneously prior to transferring to a sample holder. However, the solid-state cross polarization-magic angle spinning (CP-MAS) nuclear magnetic resonance (NMR) spectroscopy results demonstrated that it is essential in this sampling method to place all the samples in the location of consistent signal sensitivity. The same sampling method may be employed in other spectroscopic quantification techniques of solid-state phases if the method to limit the sample to the location with uniform signal sensitivity in the sample holder is adapted to each technique.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.24-30
• /
• 1996

Nowadays, Government is modifying envioronment regulatons, but PC factories, having been constructed in 1990, are running out heavy cost in disposal of waste concrete, and hardly studying how accelerator curing method affects in compressive strength. In this study, possibility that waste concrete, produced in PC factory, can be used in PC products, is reviewed, and them captures strength characteristics by curing method. The results can be summed as follows. In order to recycle concrete the mix ratio of recycled aggregate to 50 percent of less than must decrease also in summer of four seasons strength gap by curing method is very small.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.89-93
• /
• 2002

PbO contained multicomponent glass and fibers have been obtained by melting process and double crucible method. PbO containing glass is most promising for fabrication of high-numerical aperture optical fiber. In this study, main composition is $SiO_2$, PbO and glass composition mix component oxide such as $K_2O$, $Na_2O$, $B_2O_3$, $A1_2O_3$. Also, the optical, mechanical and structural properties of manufactured fibers by double crucible method are investigated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.1
• /
• pp.279-288
• /
• 2003

This study is the development of method on repairing concrete structure for progressing the durability of reinforced concrete. This method is wet spray method which compress and conduct mortar pre-mixed with polymer powder to hose by high pressure pump and spray it on the section of concrete structure through nozzle made specially. Characters of this method are that materials are selected with the sort of structure and the cause of deterioration and macro pores are removed in repaired section by conducting with high pressure and spraying with high velocity for progressing the durability of concrete structure. This study has carried out that the minimum capacity of rebound was measured with various condition and physical properties of sample made by spray method were estimated in comparing with sample made by previous hand method. Also, properties of long-term have carried out after this method was applied on site. According to experimental study, the capacity of rebound showed below 5% and physical properties of sample made by spray method were superior to that of sample made by hand method and physical and durable properties of long-term showed excellence.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3813-3820
• /
• 2014

Recently, with the increase in electrical consumption and the unbalanced power demand and supply, the power reserve rate is becoming smaller and the reliability of the power supply is deteriorating. Under this circumstance, a Battery Energy Storage System (BESS) is considered to be an essential countermeasure for demand side management. On the other hand, an economic evaluation is a critical issue for the introduction of a power system because the cost of BESS is quite high. Therefore, this paper presents economic evaluation method for utility use by considering the best mix method and successive approximation method, and an economic evaluation method for customer use by considering the peak shaving function based on the real time price. From a case study on a model power system and educational customer, it was confirmed that the proposed method is a practical tool for the economic analysis of BESS.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.1
• /
• pp.111-115
• /
• 2020

The purpose of this study is an application of Lee's Menu Engineering (LME) method for menu analysis on the eight kinds of pizza selected from 17 kinds of pizza served by an Italian restaurant near by the Keimyung College University campus. The eliminated nine items were in the third quadrant or below the trend line. The LME method is more efficient than generally used methods such as the Miller, Kasavana & Smith, Uman, Pavesic and Merricks & Jones method. The LME method comprises reference lines and four quadrants created by x, y axes and its average values. The x and y axes comprise the sales ratio (MM%, percentage of the Menu Mix) and the weighted contribution margin (WCM%, percentage of the Weighted Contribution Margin) respectively. The obtained results are such that total sales increased by 1.59% from 58,747,200 won to 59,684,000 won, despite the decrease in sales volume. Total contribution margin also increased from 35,248,320 won to 35,810,400 won. The trend line also shows from y=0.9147x (R²=0.703) to y=0.9944x (R²=0.9893). These results indicate that the LME method is superior in practical applications.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.695-702
• /
• 2002

Shotcrete (or Sprayed concrete) has been used as an important support material in New Austrian Tunnelling Method (NATM). Since the mid of 1990, permanent shotcrete tunnel linings such as Single-shell, NMT (Norwegian Method of Tunnelling) has been constructed in many countries for reducing the construction time and lowing construction costs instead of conventional in-situ concrete linings. Among essential technologies for successful application of permanent shotcrcte linings, high performance shotcrete providing high strength, high durability, better pumpability has to be developed in advance as an integral component. This paper presents the Ideas and first experimental attempts to increase early strength and bond strength of wet-mixed Steel Fiber Reinforced Shotcrete(SFRS) in sump water condition. In order to increase early strength, a new approach using high-early strength cement with liquid alkali-free accelerator has been investigated From the results, wet-mix SFRS with high-early strength cement and alkali-free accelerator exhibited excellent early strength improvement compared to the ordinary portland content and good bond strength even under sump water condition.