• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.516-519
• /
• 1997

In this paper, the control of the temperature for the vehicle air conditioner is implemented with the fuzzy controller using a micro controller. The linguistic control rules of the fuzzy controller are separated into two out variables(multi input multi output ; MIMO) : one is those for the blower motor, and the other is those for air mix door. The error in fuzzy controller, the input variable is defined as difference between the reference temperature and the actual temperature in the cabin room. The fuzzy control rules are established from the human operator experience, and based engineering knowledge about the process. The method of the center of gravity is utilized for the defuzzification.

• Korean Journal of Poultry Science
• /
• v.8 no.1
• /
• pp.25-30
• /
• 1981

This study was conducted to find the method that the least-cost formula can be determined thus allowing a better keeping of raw material supplies under the constraints having to be used some raw materials that are either in limited supply or for other reason in restricted use. In this study, it was considered that three kinds of feed were produced under limited supply of six kinds of raw materials, and data for the analysis were collected from a feed mill in southern part of Korea. According to the result of this study, it was proved better to determine the least-cost formula as the multi-mix problem than as the simple least-cost problem when more than two kinds of feed were produced wilt limited supply of raw materials.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.146-150
• /
• 2007

지금까지 각 믹스 시스템은 재배열 방식을 한가지만 사용했기 때문에 사용자는 믹스 시스템이 제공하는 재배열 방식만을 사용할 수밖에 없었다. 그러나 믹스 시스템의 일부 사용자들은 메시지의 지연시간보다 익명성을 보장받을 수 있는 재배열 방식을 원하지만, 다른 사용자들은 메시지의 익명성보다는 지연시간을 보장받을 수 있는 재배열 방식을 사용하기 원할 수 있다. 본 논문에서는 이러한 믹스 시스템 사용자들을 위해 하이브리드 믹스(hybrid mix)을 제안한다. 그리고 제안한 하이브리드 믹스와 기존의 믹스의 재배열 방식을 비교해 익명성과 메시지 지연시간의 보장 측면에서 어떤 특징을 갖는지 분석하고 마지막으로 하이브리드 믹스를 사용할 때 발생할 수 있는 상황에 대해 제시한다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.529-530
• /
• 2009

This paper presents the mix proportion, production method, and curing condition applied to extruded ECC panel and the evaluation test results of flexural behavior and fiber distribution. Test results shows that the difference in mix proportion results in the change of fiber distribution characteristics which causes difference in flexural behavior.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.93-95
• /
• 1992

A planner have to consider many uncertain factors in best generation mix problem. To solve those problems, fuzzy theory is applied in this paper. Using fuzzy measure and Sugeno's fuzzy integral, the planner can choose the best alternative. By applying the proposed algorithm to KEPCO data, the validity of the proposed method is verified.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.1035-1040
• /
• 2003

This research investigates the actual data and construction technology of the massive bottom slab placed by $23,000m^3$ concrete quantity in site of the in-ground type LNG receiving terminal having 20,000kl storage capacity. The purpose of this study is to determine the optimum mix design and control the actual concreting procedures including concrete production, transportation, placement, vibrating and curing in site. For this purpose, the optimum mix design using ternary blended cement(furnace slag cement＋fly ash) and under piping method having 11 gates and 7 distributors are selected. As test results of actual construction, concrete placement is finished during 68hours with good success and obtained the good quality of the fresh and hardened concrete including slump, air contents, no-segregation, compressive strength and low hydration heat. Also, actual data for all of concrete procedures are proved successful and satisfied with our specifications.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.6
• /
• pp.1503-1520
• /
• 2013

For multi-line insurance companies, allocating the risk capital to each line is a widely-accepted risk management exercise. In this article we consider several applications of the Euler capital allocation. First, we propose visual tools to present the diversification and the line-wise performance for a given loss portfolio so that the risk managers can understand the interactions among the lines. Secondly, on theoretical side, we prove that the Euler allocation is the directional derivative of the marginal or incremental allocation method, an alternative capital allocation rule in the literature. Lastly, we establish the equivalence between the mean-shortfall optimization and the RORAC optimization when the risk adjusted capital is the expected shortfall, and show how to construct the optimal insurance business mix that maximizes the portfolio RORAC. An actual loss sample of an insurance portfolio is used for numerical illustrations.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.E
• /
• pp.325-331
• /
• 1994

Organic extracts of diesel- exhaust particulates were analyzed for mutagenicity using Ames Salmonella typhimurium assay system. An experimental diesel microbus used was drived on the chassis dynamometer according to CVS-75 mode. The samples were taken from the mixed gases in a dilution tunnel. With a high-volume air sampler equipped with double filter holders, particulate matters were collected on a teflon-coated glass fiber filter placed behind a activated carbon filter. After ultrasonic extraction with benzene- ethanol and evaporation to dryness, the residue was dissolved in dimethylsulfoxide. Each sample was tested toward 2 strains, TA100 and TA98 by the pre-incubation method in the absence and presence of S-9mix. Average concentration of diesel- exhaust particulates was about 116.6mg/m$^3$, and 44.1~62.2 ％ to the total weight of particulates, consisted of organic matters. The mutagenicities of diesel- exhaust particulate organic matters were 4,512 and 2,205 revertants/m$^3$ toward TA100 without and with S-9mix, respectively. Those toward TA98 were 13,367 and 3,715 revertants/m$^3$, respectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.247-250
• /
• 2012

As industrialization progresses is rapidly growing, the city of density and temperature is rising successively. It leads to the status of environmental issues. It is needed to develop process of planting concrete block using by Eco-materials for replacing to he existing rooftop light soil that imported. In this study, developing the process of planting lightweight block is researched on using applications of 6 Sigma technique. It makes process object improve standard by using statistical method. Also, there are suggestion that it is optimum mix design conditions and affection of experimental factors in matters of developing planting concrete block for rooftop greening.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.259-265
• /
• 2000

This study is a fundamental research for recycling waste vinyl in asphalt concrete mixture for roadway pavement. The mixing method and proper content of waste polyethylene(PE) film were determined through preliminary mix design. This study was performed mix designs using 2 type graduations of aggregate and used two types waste PE film. The asphalt concrete mixture was satisfied with the specification of the Ministry of Construction and Transportation. Its showed that dense grade asphalt concrete mixture containing waste vinyl were higher performance in comparision to other mixtures(common dense grade mixture and gap grade mixtures). From results of this study, it was confirmed that addition of waste vinyl improved on quality of asphalt concrete mixture.