• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.300-303
• /
• 2004

KOMPSAT-2 satellite mission operations and control system has been developed by ETRI. The system functional architecture, analysis and design, implementation, and tests are presented in this paper.

• 전기의세계
• /
• 제28권7호
• /
• pp.60-66
• /
• 1979

In this paper we deal with a hardware redundency, using the replications of an original module to enhance the reliability of the system in view of static and dynamic redundancy. As results of the study the following facts have been proved that (1) if the mission time is small (T .neq. 0.5), the effect of spare modules cannot be expected significantly, (2) for the small mission time (0.1 .neq. T .neq. 0.3) the SPR system is more reliable than the other redundant systems. In addition to above facts, it is also proved that for the large mission time (T=1), the dynamic redundant system is more reliable than the static redundant system, and that the SR system is more reliable than the HR system in the dynamic redundant system.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.1-9
• /
• 2018

The drone has the restrictions on the controls, the battery and the surrounding environment in performing missions such as fire extinguishing. This restriction can improve the limitations that leave the leader can be monitored. The existing method of constructing the leader based on the GPS is highly dependent on the signal and is vulnerable to hardware defects. In this paper, we solve these problems with dynamic leaders decision. Drones can use their leader drones rather than remote controls. Information about the drones changes depending on the surrounding environment by replacing the leader with a dead battery or electing leader by the drones themselves without human intervention. This suggests that the leader monitors the community through a framework for continuing the drones collaboration and that the community can collaborate to overcome the limitations and continue the mission. The analysis of the proposed system through simulation experiments confirm that it has a better task performance. By using this system, it is possible to continue the mission and solve problems that are vulnerable to hardware defects.

• 산업경영시스템학회지
• /
• 제46권4호
• /
• pp.294-303
• /
• 2023

During wartime, the operation of engineering equipment plays a pivotal role in bolstering the combat prowess of military units. To fully harness this combat potential, it is imperative to provide efficient support precisely when and where it is needed most. While previous research has predominantly focused on optimizing equipment combinations to expedite individual mission performance, our model considers routing challenges encompassing multiple missions and temporal constraints. We implement a comprehensive analysis of potential wartime missions and developed a routing model for the operation of engineering equipment that takes into account multiple missions and their respective time windows of required start and completion time. Our approach focused on two primary objectives: maximizing overall capability and minimizing mission duration, all while adhering to a diverse set of constraints, including mission requirements, equipment availability, geographical locations, and time constraints.

• Journal of Astronomy and Space Sciences
• /
• 제33권4호
• /
• pp.323-333
• /
• 2016

In this study, the uncertainty requirements for orbit, attitude, and burn performance were estimated and analyzed for the execution of the $1^{st}$ lunar orbit insertion (LOI) maneuver of the Korea Pathfinder Lunar Orbiter (KPLO) mission. During the early design phase of the system, associate analysis is an essential design factor as the $1^{st}$ LOI maneuver is the largest burn that utilizes the onboard propulsion system; the success of the lunar capture is directly affected by the performance achieved. For the analysis, the spacecraft is assumed to have already approached the periselene with a hyperbolic arrival trajectory around the moon. In addition, diverse arrival conditions and mission constraints were considered, such as varying periselene approach velocity, altitude, and orbital period of the capture orbit after execution of the $1^{st}$ LOI maneuver. The current analysis assumed an impulsive LOI maneuver, and two-body equations of motion were adapted to simplify the problem for a preliminary analysis. Monte Carlo simulations were performed for the statistical analysis to analyze diverse uncertainties that might arise at the moment when the maneuver is executed. As a result, three major requirements were analyzed and estimated for the early design phase. First, the minimum requirements were estimated for the burn performance to be captured around the moon. Second, the requirements for orbit, attitude, and maneuver burn performances were simultaneously estimated and analyzed to maintain the $1^{st}$ elliptical orbit achieved around the moon within the specified orbital period. Finally, the dispersion requirements on the B-plane aiming at target points to meet the target insertion goal were analyzed and can be utilized as reference target guidelines for a mid-course correction (MCC) maneuver during the transfer. More detailed system requirements for the KPLO mission, particularly for the spacecraft bus itself and for the flight dynamics subsystem at the ground control center, are expected to be prepared and established based on the current results, including a contingency trajectory design plan.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1995년도 한국우주과학회보 제4권1호
• /
• pp.39-39
• /
• 1995

No Abstract. See Full-text

• Journal of Astronomy and Space Sciences
• /
• 제31권1호
• /
• pp.51-61
• /
• 2014

In this work, the preliminary analysis on both the tracking schedule and measurements characteristics for the spacecraft on the phase of lunar transfer and capture is performed. To analyze both the tracking schedule and measurements characteristics, lunar transfer and capture phases' optimized trajectories are directly adapted from former research, and eleven ground tracking facilities (three Deep Space Network sties, seven Near Earth Network sites, one Daejeon site) are assumed to support the mission. Under these conceptual mission scenarios, detailed tracking schedules and expected measurement characteristics during critical maneuvers (Trans Lunar Injection, Lunar Orbit Insertion and Apoapsis Adjustment Maneuver), especially for the Deajeon station, are successfully analyzed. The orders of predicted measurements' variances during lunar capture phase according to critical maneuvers are found to be within the order of mm/s for the range and micro-deg/s for the angular measurements rates which are in good agreement with the recommended values of typical measurement modeling accuracies for Deep Space Networks. Although preliminary navigation accuracy guidelines are provided through this work, it is expected to give more practical insights into preparing the Korea's future lunar mission, especially for developing flight dynamics subsystem.

• 한국정보통신학회논문지
• /
• 제17권6호
• /
• pp.1414-1418
• /
• 2013

본 논문은 무인항공기의 운용 고도 및 거리를 데이터링크 측면에서 분석하였다. 무인항공기의 운용 고도는 일반적으로 탑재되는 임무장비의 특성 및 운용 목적에 따라 결정된다. 무인항공기의 운용 고도를 결정하기 전에 데이터링크 장비의 가시선 조건을 반드시 고려해야 한다. 가시선 분석은 지상통신장비의 안테나 특성 및 설치고도, 지구의 곡률 반경을 사용하여 분석했다. 지상통신장비 설치고도가 0m 일 때, 32dBi 파라볼라 안테나를 사용할 경우 통신거리 300km에서 15,779m이고, 44dBi 파라볼라 안테나를 사용할 경우 7,927m에서 운용 가능하다. 또한 원거리 통신에서는 고 이득안테나가 운용 고도 측면에서 유리함을 확인하였다.

• 한국임상약학회지
• /
• 제26권4호
• /
• pp.291-297
• /
• 2016

Background: The current educational goals and missions of pharmacy schools in Korea were analyzed to examine the current orientation and future direction of pharmaceutical education. Methods: Educational mission statements were obtained from the homepages of 35 pharmacy schools and subjected to convert into codes. Themes and categories were induced using qualitative content-analysis from the codes and compared according to location of school (capital area versus province), public versus private, and date of initial enrollment (before versus in 2011). The themes and categories were compared with "the eight-star pharmacist" suggested by World Health Organization (WHO) and International Pharmaceutical Federation (FIP). Results: Twelve themes, 44 categories, and 496 codes were identified. Themes included pharmaceutical expertise, professionalism, contribution to society, basic educational ideology, sphere of activity, leadership, research, dealing with future change, problem-solving ability, self-management and development, cooperation, and respect for life. Mission statements of schools that initially enrolled in 2011 cited humankind level contribution (p=0.011), patient-centered care (p=0.026), and globalization (p=0.018) more frequently than those enrolled before 2011. Most schools mentioned about care-giver, researcher, and decision-maker which were stated in "the eight-star pharmacist". Conclusion: To meet the growing social requirements of a pharmacist's roles, wide-ranging active discussion on establishing educational goals should be made.

• Journal of Computing Science and Engineering
• /
• 제2권4호
• /
• pp.375-393
• /
• 2008

The dynamic cast operation allows flexibility in the design and use of data management facilities in object-oriented programs. Dynamic cast has an important role in the implementation of the Data Management Services (DMS) of the Mission Data System Project (MDS), the Jet Propulsion Laboratory's experimental work for providing a state-based and goal-oriented unified architecture for testing and development of mission software. DMS is responsible for the storage and transport of control and scientific data in a remote autonomous spacecraft. Like similar operators in other languages, the C++ dynamic cast operator does not provide the timing guarantees needed for hard real-time embedded systems. In a recent study, Gibbs and Stroustrup (G&S) devised a dynamic cast implementation strategy that guarantees fast constant-time performance. This paper presents the definition and application of a cosimulation framework to formally verify and evaluate the G&S fast dynamic casting scheme and its applicability in the Mission Data System DMS application. We describe the systematic process of model-based simulation and analysis that has led to performance improvement of the G&S algorithm's heuristics by about a factor of 2. In this work we introduce and apply a library for extracting semantic information from C++ source code that helps us deliver a practical and verifiable implementation of the fast dynamic casting algorithm.