• 한국군사과학기술학회지
• /
• 제26권2호
• /
• pp.149-158
• /
• 2023

To predict the aerodynamic characteristics of the grid fins from subsonic to supersonic speeds, low fidelity SW as well as CFD SW were applied. VLM(Vortex Lattice Method) and SE(Shock-Expansion) method were used at subsonic and supersonic speed domain respectively for the rapid prediction of low fidelity SW. For 2 configurations of the grid fins, the CFD computations and tests using the trisonic wind tunnel were also performed to compare the results of the grid fins. The results of low fidelity SW, CFD SW and the wind tunnel tests data were agreed well each other. Through further research on the grid fins, the effective parameters of the grid fin configurations according to the speed regime will be investigated.

• 한국군사과학기술학회지
• /
• 제26권2호
• /
• pp.171-178
• /
• 2023

PCM data is result of air-vehicle flight test, this data is distributed for each engineers to analyze its condition. Since line-of-sight between the air-vehicle and the ground receiver cannot always be secured, remote PCM data recording system was claimed to be required. In this paper multi-function PCM data recorder has been described. This PCM data recorder was intended to place on inside of flight object. It can record about two hours in 32 GB SD card with maximum 7 Mbps data rate. RS-422/485 and RJ-45 interface enhanced accessibility for users. 5 V and 1 A power consumption and 19.5 mm × 152.5 mm × 102.3 mm allow to connect with mobile PCM devices. It acquired more than 190-minutes data in 12-times flight test. Also, it achieved military standard environmental test MIL-STD-810G to prove its stability and solidness.

• 한국군사과학기술학회지
• /
• 제26권1호
• /
• pp.91-101
• /
• 2023

Modeling and Simulation(M&S) technology has been widely used to solve constraints such as time, space, safety, and cost when we implement the same development and test environments as real warfare environments to develop, test, and evaluate weapon systems for the last several decades. The integration and test environments employed for development and test & evaluation are required to provide Live Virtual Construction(LVC) simulation environments for carrying out requirement analysis, design, integration, test and verification. Additionally, they are needed to provide computing environments which are possible to reconfigure computing resources and software components easily according to test configuration changes, and to run legacy software components independently on specific hardware and software environments. In this paper, an Integration Test and Simulation for Engagement Control(ITSEC) bed using a bare-metal virtualization mechanism is proposed to meet the above test and simulation requirements, and it is applied and implemented for an air missile defense system. The engagement simulation experiment results conducted on air and missile defense environments demonstrate that the proposed bed is a sufficiently cost-effective and feasible solution to reconfigure and expand application software and computing resources in accordance with various integration and test environments.

• Strategy21
• /
• 통권42호
• /
• pp.196-223
• /
• 2017

The aim of this paper is to analyze China's naval strengthening and threat reflected in submarines, aircraft, destroyers and missile capabilities and US Navy's counter-forces. China is strengthening its naval forces in accordance with its three-step naval force build-up plan, and the introduction of Russian destroyers and submarines is a foothold for China's naval enforcement. The Chinese Navy also converted the concept of the First-Second Island Chain Defense, which it had already maintained, to the concept of maritime layer defense. Currently, the Chinese Navy maintains the concept of a Three-Maritime Layer Defense which includes the South China Sea, where artificial islands are being built by China, in the First Layer Defense and the East China Sea in the Third Layer Defense. Along with the advancement of Chinese Navy's submarines, surface vessels and aircraft's operational capabilities, ballistic and cruise missile capabilities become a major threat to the US Navy. If a crisis occurs in the East China Sea or in the Taiwan Waters, the US Navy will face more difficulties in employing the Carrier Strike Group to manage the crisis. Meanwhile, if a crisis occurs on the Korean Peninsula, it will be a burden to dispatch Carrier Strike GroupS to the East and West Seas of the Korean Peninsula. For the stable future, the US Navy should develop a strategy to respond more effectively to the Chinese Navy, which is challenging new maritime supremacy in East Asia.

• 한국군사과학기술학회지
• /
• 제17권2호
• /
• pp.265-274
• /
• 2014

A recent air defense missile system(ADMS) is required to have a capability to intercept super-high speed targets such as tactical ballistic missiles(TBMs) by performing engagement control efficiently. The air defense missile system should be ready to engage the TBMs as soon as the ADMS detects TBMs because falling velocity of TBM is very high and remaining time interval to engage TBM is very short. As a result, the ADMS has to predict the trajectories of TBMs accurately with estimated states of dynamics to generate predicted intercept point(PIP). In addition, it is needed to engage TBMs accurately via transmitting the obtained PIP data to the corresponding intercept missiles. In this paper, an analysis about the relationship between ballistic coefficient and PIP accuracy which is depending on geodetic height of the first detection of TBM is included and an issue about effective engagement control for the TBM is considered.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.523-536
• /
• 2013

A recent air defense missile system is required to have a capability to intercept short-range super-high speed targets such as tactical ballistic missile(TBMs) by performing engagement control efficiently. Since flight time and distance of TBM are very short, the missile defense system should be ready to engage a TBM as soon as it takes an indication of the TBM launch. As a result, it has to predict TBM trajectory accurately with cueing information received from an early warning system, and designate search direction and volume for own radar to detect/track TBM as fast as it can, and also generate necessary engagement information. In addition, it is needed to engage TBM accurately via transmitting tracked TBM position and velocity data to the corresponding intercept missiles. In this paper, we proposed a method to estimate TBM trajectory based on the Kepler's law for the missile system to detect and track TBM using the cueing information received before the TBM arrives the apogee of the ballistic trajectory, and analyzed the bias of prediction error in terms of the transmission period of cueing data between the missile system and the early warning system.

• 한국군사과학기술학회지
• /
• 제18권3호
• /
• pp.253-259
• /
• 2015

This paper introduces a signal processing technique for discrimination of missile target. In order to detect and discriminate the target, a seeker radar makes use of chirp waveform and stretch processing to generate high resolution range profiles(HRRPs). RELAX(relaxation) algorithm, which is one of the spectral estimation techniques, was used to find scattering centers of a missile from HRRP. From the information on the distribution of one-dimensional(1-D) scattering centers on a target, we can discriminate the target without noise.

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.159-169
• /
• 2017

This study aims to the increasing the reliability of gun firing system of patrol killer guided missile from failure mode analysis. In order to find out the breakdown parameter, the examination process of the sources of the problems and the quality improvement activities are analyzed with performance testing data. From this study, the rate of operation and the reliability of 76 mm naval guns will be increase. And the result of the study is expected to be used as a reference data in the naval gun firing system for another failure mode analysis.

• 한국시뮬레이션학회논문지
• /
• 제15권4호
• /
• pp.69-77
• /
• 2006

위치 선정이나 설비배치문제를 기존의 정성적 접근방법에서 벗어나 수학적 방법을 통해 해결하려는 시도가 여러 분야에서 이루어지고 있다. 지역담당모형은 이러한 연구 분야중 하나로 주어진 문제를 수학적으로 현실과 유사하게 구현시킬 수 있고 모형에 대한 해법절차도 다양하기 때문에 여러 형태의 배치문제들에도 폭넓게 적용되어 왔으며 최근 들어서는 군사설비분야에서도 그 활용도가 높아지고 있다. 본 연구는 미사일 방어를 위하여 한국해군 KDX 함정의 최적배치에 대한 시뮬레이션 모델을 구축하였다. 시뮬레이션 모델은 부분지역담당모형을 바탕으로 공격자와 방어자의 측면을 단계적으로 평가하는 방법으로 구현되어 있으며, 구축된 모형에 대하여 가능한 시나리오를 설정하고 실험을 통하여 결과를 분석하였다. 구현된 모형실험은 공격자의 공격계획과 공격계획에 따른 최적의 KDX 배치선정과 방어미사일 할당에 대한 의사결정방안을 제시하고 있다. 본 연구의 최적배치모형은 한국적 미사일방어 체계구축을 위하여 도입될 최신무기체계의 위치선정에 대한 최적의 대안을 제시하고 효율적인 부대배치를 위한 참고자료로 활용할 수 있을 것이다.

• 한국항공우주학회지
• /
• 제39권4호
• /
• pp.354-361
• /
• 2011

본 연구에서는 단일 함정에 대해 근접방어용 대공방어유도탄을 이용한 대함유도탄 방어 기법 로직을 제안한다. 방어함정은 레이더 정보를 이용해 대함유도탄 궤적을 예측하고, 예측된 궤적을 바탕으로 방어 기법 로직에 의해 교전 계획을 수립한다. 방어 기법 로직은 최대한 많은 수의 대함유도탄을 함정으로부터 최대한 먼 곳에서 요격하는 로직으로 이전 발사가 요격에 실패했을 경우에 대비하기 위함이다. 방어유도탄의 할당에 관한 결정은 통합 격추 확률과 예상 요격 지점 비교를 통해 이루어진다. 제안한 로직의 성능은 비선형 2차원 평면 시뮬레이션을 통해 검증하였다.