• 전력전자학회논문지
• /
• 제24권3호
• /
• pp.181-190
• /
• 2019

Active power decoupling circuits have emerged to eliminate the inherent second-order ripple power in a single-phase power conversion system. This study proposes a design method to determine the optimal capacitance for active power decoupling circuits to achieve high power density. Minimum capacitance is derived by analyzing ripple power in a passive power decoupling circuit, a buck-type circuit, and a capacitor-split-type circuit. Double-frequency ripple power decoupling capabilities are also analyzed in three decoupling circuits under a 3.3 kW load condition for a battery charger application. To verify the proposed design method, the performance of the three decoupling circuits with the derived minimum capacitance is compared and analyzed through the results of MATLAB -Simulink and hardware-in-the-loop simulations.

• 전기의세계
• /
• 제30권7호
• /
• pp.454-459
• /
• 1981

The aim of study in this paper is that in a system drive of the converter-inverter fed induction motor, the minimum input power can be maintained by control the voltage and frequency of the motor. In theoretical and experiment results describtion motor efficiency is improved by properly varying the ratio v/f. At lightly load condition, for example its efficiency was improved from 44% to 66% as the ratio of v/f varied from 1 to 0.57.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.15-27
• /
• 1998

Several aspects of polymer dispersed liquid crystal(PDLC) film properties make them interesting for display application. Most versions of PDLC materials are able to modulate light without the use of polarizers, which offers advantages in optical throughput(brightness) and viewing angle compared to polarizer-based display. In this papers, we attemped to doe minimum of remaining liquid crystals at polymer network for the liquid crystal-polymer composite (LCPC) films. In results, best phase separation behaviors turned out liquid crystal/monomer/oligomer mixture system.

• 전자공학회논문지B
• /
• 제31B권5호
• /
• pp.58-64
• /
• 1994

In this paper, a robust control scheme of a nonlinear system with norm bounded uncertainty is studied. The proposed algorithm is based on variable structure systems (VSS) theory. the sliding mode which is robust to plant uncertainty and disturbances is obtained by regulating a sliding surface equation. This VSS control law can improve the robustness of control systems by adjusting the minimum reaching velocity in a reaching phase. A numerical example is given to verify the effectiveness of the control law.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.872-877
• /
• 1990

Robustness of a model refernece direct adaptive pole placement control for not necessarily minimum phase systems is studied subject to unmodeled dynamics and bounded disturbances. The adaptive control scheme involves two estimators for the system and the controller parameter estimation, respectively. The robustness is obtaind under some weak assumptions and by using both a normalized least-squares algorithm with dead zone and an appropriate nonlinear feedback.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1167-1170
• /
• 1999

We consider a negative unity feedback control system in which a controller and a given minimum phase transfer function are in cascade. This paper present a sufficient condition for the existence of a constant gain controller under which the overall closed loop characteristic polynomial is stable. This sufficient condition is based on Lehnigk's lemmas.

• 대한전기학회논문지
• /
• 제43권5호
• /
• pp.827-837
• /
• 1994

This paper presents robustness propertis of the Kalman Fiter and the associated LQG/LTR method for linear time-invariant output-delayed systems. It is shown that, even for minimum phase plants, the LQG/LTR method can not recover the target loop transfer function. Instead, an upper bound on the recovery error is obtained using an upper bound of the solution of the Kalman filter Riccati equations. Finally, some dual properties between output-delayed systems and input-delayed systems are exploited.

• Journal of KIEE
• /
• 제10권1호
• /
• pp.23-27
• /
• 2000

The relative degree one and weakly minimum-phase conditions have been major obstacles for passification of the given system. In this paper, a dynamic output feedback passifier which can remove the obstacles is presented. The proposed method does not require any modification of the given output except just adding a new term. Therefore, the scheme is more suitable for output feedback passification.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1337-1342
• /
• 1990

This paper deals with control system design strategy for electrolmaginetic suspension (E.M.S.) system. For a successful control of E.M.S. system, the nature of E.M.S. system is deeply studied in the view point of non-linear, open-loop unstable, time-varying, non-minimum phase system. To find a special control treatment for E.M.S. system, analyses and simulations for various models are carried out. As one of the successful candidates, adaptive control concept is introduced and sample hardware system using digital signal processor is implemented.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1432-1437
• /
• 2001

In this paper, a control algorithm which is synchronously excitating the bearing with whirl speed of rotor is employed to suppress the whirl instability and unbalance response of the rotor-bearing system. Also, the cavitation algorithm implementing the Jakobsson-Floberg-Olsson boundary condition is adopted to predict cavitation regions in the fluid film more accurately than a conventional analysis with the Reynolds condition. The stabilities and unbalance responses of the rotor-bearing system are investigated for various control gains and phase differences between the bearing and journal motion. It is shown that the unbalance response of the system can be greatly improved by synchronous control of the bearing, and there is an optimum phase difference, which gives the minimum unbalance response of the system, for given operating condition. It is also found that the onset speed of the instability can be greatly increased by synchronous control of the bearing.