• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2552-2557
• /
• 2007

Shape optimization of an internal cooling passage with staggered dimples on single surface is performed and performances of surrogates are evaluated in this paper. Optimizations are performed so that turbulent heat transfer can be enhanced compromising with pressure loss due to friction. The three-dimensional governing differential equations have been solved to find the overall Nusselt number and friction factor which are related to the objective functions of this problem. Three design variables were selected among the dimensionless geometric variables. Basic surrogate models such as second order polynomial response surface approximation (RSA), Kriging meta-modeling technique, radial basis neural network (RBNN), and derived press based averaged (PBA) surrogate model are constructed. The optimal points are searched from the above constructed surrogates by sequential quadratic programming (SQP). It is shown that use of multiple surrogates can increase the robustness in prediction of better design with minimum computational cost.

• 교육녹색환경연구
• /
• 제13권1호
• /
• pp.50-57
• /
• 2014

The educational facilities is the facility wining the specific gravity which is the most abundant by 269s (25.5%) among the godfather lease application facilities (1056)s of the abolition of school. In case of reusing the closing down a school as the educational facilities there is no legal matter which is under the separate punishment in comparison with the other facility according to the materials of the Ministry of Environment in 2013, and I am analyze that minimum cost is spent on a remodeling and it is most much used. The pattern study thinks about a purpose with the master plan through the plan characteristic derivation according to the analysis of current situation of the domestic closing down a school application educational facilities in which the related study is nonexistent and type in the educational facilities plan of the closing down a school still afterward in being utilized for reference data and guide book.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.129-131
• /
• 2004

Elliptic Curve Cryptography (ECC) coprocessors support massive scalar multiplications of a point. We research the design for multi-segment multipliers in fixed-size ECC coprocessors using the multi-segment Karatsuba algorithm on GF($2^m$). ECC coprocessors of the proposed multiplier is verified on the SoC-design verification kit which embeds ALTERA EXCALIBUR FPGAs. As a result of our experiment, the multi-segment Karatsuba multiplier, which has more efficient performance about twice times than the traditional multi-segment multiplier, can be implemented as adding few H/W resources. Therefore the multi-segment Karatsuba multiplier which satisfies performance for the cryptographic algorithm, is adequate for a low cost embedded system, and is implemented in the minimum area.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1022-1027
• /
• 2004

In this study, the shape of plate-fin type heat sink is numerically optimized to acquire the minimum pressure drop under the required temperature rise. To do this, a new sequential approximate optimization (SAO) is proposed and it is integrated with the computational fluid dynamics (CFD). In thermal/fluid systems for constrained nonlinear optimization problems, three fundamental difficulties such as high cost for function evaluations (i.e., pressure drop and thermal resistance), the absence of design sensitivity information, and the occurrence of numerical noise are confronted. To overcome these problems, the progressive quadratic response surface method (PQRSM), which is one of the sequential approximate optimization algorithms, is proposed and the heat sink is optimize by means of the PQRSM.

• 품질경영학회지
• /
• 제16권2호
• /
• pp.99-110
• /
• 1988

This study is concerned with a design algorithm to minimize the investment as well as maximize the throughput in automated warehouse system. A simulation model is designed and a solution methodology is proposed. The experiment, are conducted for the cases with 100, 90, 80, 70, 60, 50 and 0 % dual command policies in terms of the important factors such as the crane velocity, the height of system and the rack utilization. The results indicate that the throughput is slightly decreased when the ratio of dual command is decreased and the other characteristics however are not affected. The result also shows that the optimal rack should be designed for a crane to take the same amount of travel time for horizontal and vertical movement.

• 경영과학
• /
• 제23권2호
• /
• pp.161-174
• /
• 2006

In this paper, we consider a network optimization problem arising from the deployment of BcN access network. BcN convergence services requires that access networks satisfy QoS meausres. BcN services have two types of traffics : stream traffic and elastic traffic. Stream traffic uses blocking probability as a QoS measure, while elastic traffic uses delay factor as a QoS measure. Incorporating the QoS requirements, we formulate the problem as a nonlinear mixed-integer Programming model. The Proposed model seeks to find a minimum cost dimensioning solution, while satisfying the QoS requirement. We propose two local search heuristic algorithms for solving the problem, and develop a network design system that implements the developed heuristic algorithms. We demonstrate the computational efficacy of the proposed algorithm by solving a realistic network design problem.

• 한국경영과학회지
• /
• 제22권3호
• /
• pp.59-80
• /
• 1997

Designing highly survivable interoffice telecommunication networks is considered. The problem is formulated as a minimum-cost network design problem with three node connectivity constraints. These valid and facet-defining inequalities for the convex hull of the solution are presented. A branch and cut algorithm is proposed based on the inequalities to obtain the optimal solution. With the lower bound by the cutting plane algorithm, a delete-ink heuristic is proposed to otain a good upper bound in the branch and bound procedure. The effeciveness of the branch and cut algorithm is demonstrated with computational results for a variety of problem sets : different lower bounds, two types of link costs and large number of links. The cutting plane procedure based on the three inequalities provides excellent lower bounds to the optimal solutions.

• 안보군사학연구
• /
• 통권9호
• /
• pp.257-282
• /
• 2011

In this paper, we propose an architecture design of military operation system utilizing cellular networks. The main contribution of this paper is to provide a cost-effective military operation solution for ground forces, which is based on IT(information technology). By employing the cellular phones of officers' and non-commissioned officers' as the tools of operational communication, the proposed system can be constructed in the minimum duration and be built on the four components: command and control system, gateway, security system, and terminal(cell phone). This system is most effective for the warfare of limited area, but the effectiveness does not decrease under the total war covering the whole land of Korea. For the environmental change of near future, expanded architecture is also provided to utilize the functionalities of smart phones.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.135-141
• /
• 2008

Independent suspension axle and final reduction gear for special-purpose vehicles such as a armored vehicles are almost imported in Germany etc. so, developing them is necessary to save cost. In severe condition (open fields, water surface driving, obstacle pass), special-purpose vehicles must work well. Drop box, axle and final reduction gear performed static analysis. We know that is possible weight reduction. The purpose of this paper is to find out the optimal shape of final reduction gear's case by means of response surface methodology. The response surface method is the statistical method which can be applied to the non-sensitivity based optimization. The response surface which is constructed by the least square method contains only the polynomial terms so that the global maximum and minimum points are easily obtained.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.428-441
• /
• 2015

Corresponding to the high consumption rate of the selfie stick for cell phone camera, the design of the product is becoming diverse. However, relatively low cost selfie stick models are not strong enough to stand the weight of the cell phone. This results into a bending of the stick or the accidental fall of the cell phone by the failure of the holding unit. As a solution to the problem, design of selfie stick that is structurally strong enough to stand the weight of the cell phone with the minimum weight for the portability is proposed in this paper.