• 한국분말재료학회지
• /
• 제12권3호
• /
• pp.192-200
• /
• 2005

Ultrafine copper powder was prepared from $CuO-H_2O$ slurry with hydrazine, a reductant, under $70^{\circ}C$. The influence of various reaction parameters such as temperature, reaction time, molar ratio of $N_2H_4$, PvP and NaOH to Cu in aqueous solution had been studied on the morphology and powder phase of Cu powders obtained. The production ratio of Cu from CuO was increased with the ratio of $N_2H_4/Cu$ and the temperature. When the ratio of $N_2H_4/Cu$ was higher than 2.5 and the temperature was higher than $60^{\circ}C$, CuO was completely reduced into Cu within 40 min. The crystalline size of Cu obtained became fine as the temperature increase, whereas the aggregation degree of particles was increased with the reaction time. The morphology of Cu powder depended on that of the precursor of CuO and processing conditions. The average particle size was about $0.5{\mu}m$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.253-256
• /
• 2004

Recently, construction works of scale are getting larger with economic growth. Shotcreting is one of major processes in tunnels construction. Accelerator is used in tunnel and underground structures to ensure early strength of shotcrete. Silicate based accelerator and aluminate based accelerator is getting widely in the field. But these accelerators have many problems due to decesase of long-term strength and low quality of the hardened shotcrete. in order to solve these problems, recently developed powder types cement mineral accelerator. In this study, we tested chloride permeability, freezing and thawing and accelerated carbonation of shotcrete. As a result of the test, wet-mixed shotcrete with powder types cement mineral accelerator exhibited durability improvement compared to the conventional shotcrete accelerator.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.13-14
• /
• 2017

In this paper, research for use possibility as silica source of waste concrete powder discharged from direct and indirect carbonation has progressed. For the research, properties on the extruding panel using waste concrete powder with high silica content is evaluated. As the results, compressive strength of specimen is increased 24% compared to control specimen when waste concrete powder replaced 50%, that is discharged from carbonation process, as silica source.

• 한국재료학회지
• /
• 제11권9호
• /
• pp.763-768
• /
• 2001

Molybdenum-based thermal spray powder is widely used for coating the moving parts of the internal combustion engines due to its excellent wear resistance. A composite powder of the $Mo_{40}(Al_{1-x}Si_x)_{60}$ system was synthesized using the SHS method. The synthesized bulk was pulverized and specially treated to produce thermal spray powder. It was found that the synthesis reaction consisted of two-steps: the formation of $Al_8/Mo_3$ and the formation of Mo(Al,Si)$_2$. Both the temperature and the rate of the SHS reaction linearly increased with the increase of the value of x in $Mo_{40}(Al_{1-x}Si_x)_{60}$, The temperature and the rate of the reaction were also affected by the compacting density of the specimens, exhibiting the maximum valves at 62% and 60%, respectively. Since spherical shape is advantageous to the thermal spraying process, shape-control of the powder was attempted with PVA as a binding additive, resulting in the successful production of almost perfectly spherical powder of 80 $\mu\textrm{m}$ Ø$(d_{50})$ mean particle size.

• 한국토양비료학회지
• /
• 제40권5호
• /
• pp.377-382
• /
• 2007

완효성을 부여하려는 물질의 외부에 광물입자를 이용하여 피복형 구조체를 제조하고 이의 방출조절능력을 카리비료에 대한 용출실험을 통해 평가하였다. 황산칼륨을 구형의 펠릿으로 제조하고 이의 표면에 평균입도 $13.0{\mu}m$와 $27.4{\mu}m$인 두 가지 장석분말을 이용하여 구조체를 제조하였다. 구조체의 두께와 소성하는 온도를 달리하여 펠릿을 제조하고 용출실험을 통해 구조체의 완효성 발현능력을 평가하였다. 칼륨의 용출은 burst effect효과가 커서 초기 용출율이 높았는데, 소성온도가 낮고 구조체가 얇은 시료에서 크게 나타났다. $1{\sim}55{\mu}m$의 입도를 갖는 장석 보다 $1{\sim}130{\mu}m$의 입도를 갖는 장석에 의한 구조체가 더 높은 충진율에 의해 용출속도를 늦출 수 있었다. 용출속도는 약 7일부터 정상상태의 용출속도를 보이기 시작하였고 용출패턴은 펠릿에 남아있는 칼륨의 농도에 비례하는 first order kinetic의 패턴을 나타내었다. 평균입도 $27.4{\mu}m$인 장석으로 1~2.6mm두께의 피복형 구조체를 만들어 $1050^{\circ}C$에서 소성한 팰릿의 경우에는 40일의 용출율이 약 43%를 나타내었다.

• 한국조리학회지
• /
• 제7권1호
• /
• pp.135-145
• /
• 2001

This study was undertaken to analyze chemical composition, minerals and texture characteristics of Pongnipgangjung in various volumes of adding Pongnip powder. With increasing Pongnip powder level, moisture, total nitrogen, crude protein, crude fat and crude ash contents were significantly increased. Ca, P, K and Mg contents of Pongnip powder 1%, 3%, 4% was higher than Pongnip flour free group. According to rheometer evaluatuion, Pongnipgangjung added Pongnip powder 1% showed higher level of hardness than Pongnip powder 3%, 4% and free group. In sensory evaluation, the results of preference are in the following order Pongnipgangjung added Pongnip powder 1%, 3%, 4% and free group.

• 한국건설순환자원학회논문집
• /
• 제6권2호
• /
• pp.103-111
• /
• 2011

본 연구에서는 현재 시멘트 콘크리트 혼합재로서 널리 사용되고 있는 고로수쇄 슬래그와 애쉬의 페이스트 유동특성을 파악하였다. 그 방법으로 혼합재 단독을 사용한 페이스트의 유동특성을 파악하여, 아래와 같은 결론을 얻을 수 있었다. 혼합재 단독의 페이스트 유동특성을 시험하기 위하여, 3종류의 분쇄기를 사용하여 3가지 입도로 분쇄된 분말을 제조하였다. 이 분말을 Rosin-Rammler 분포식을 사용하여 얻은 계수 n 값과 De 값을 유동특성과 비교 분석한 결과에서, 일반적으로 같은 입경 크기 일 때 Ash 분말이 Slag 분말보다 소성점도 및 항복응력이 높았으며, 또한 동일 n 값에서 Ash 분말이 Slag 분말 보다 비교적 높은 소성점도와 항복응력을 나타내었으나, 입도분포 폭의 변화에는 Slag 분말이 Ash 분말 보다 민감한 유동특성의 변화 경향을 나타내었다.

• 한국식생활문화학회지
• /
• 제31권6호
• /
• pp.597-604
• /
• 2016

This study was performed to investigate the quality characteristics of lotus root tea (LT) prepared with Gardenia jasminoides powder (GLT) and Rubus coreanus Miquel powder (RLT). The proximate compositions, physicochemical properties, mineral contents, and sensory evaluations of samples were measured. GLT sample showed higher contents of crude protein, crude fat, crude ash, and moisture (p<0.001) as well as pH (p<0.001) compared to LT and RLT. In terms of color, lightness (L) and yellowness (b) of GLT were the highest among the samples, whereas redness (a) of GLT was the lowest. The results of mineral analysis showed that the mineral contents of K, Ca, and Fe of LT were the highest, whereas the content of Mg of GLT was the highest. The results of browning color intensity of all samples showed that LT had the lowest. GLT showed higher contents of water soluble solids than LT and RLT. In the sensory evaluation, the scores of color, flavor, aftertaste, feeling of throat, and overall preference of LT and GLT were significantly higher than those of RLT. From the findings, this study suggests that addition of Gardenia jasminoides powder was effective for preparation of lotus root tea in the aspects of consumer acceptability.

• 동의신경정신과학회지
• /
• 제10권1호
• /
• pp.159-177
• /
• 1999

In the study on the mineral substance used in Dong Eu Bo Gam(range of 'Sin') and the recent prescription of china, the results were as follows. 1. According to Dong Eu Bo Gam, Realgar was used for Sa-Su most often and Gold-leaf, Succinum, especially Cinnabaris were used for amnesia, epilepsy, a general term of manic-depressive psychosis too. The most kinds of mineral substance used for epilepsy. 2. According to recent prescription of china, Fossilia Ossis Mastodi got the most, and Succinum, Cinnabaris, Lapis Chloriti, Haematitum, Magnetitum, Gypsum Fibrosum, Fossilia Dentis Mastodi, iron powder were used frequently. For external application, Sulfur was too. And most kinds of mineral substance were used for epilepsy and schizophrenia. 3. Realgar, Gold-leaf, Succinum, Cinnabaris, Lapis Chloriti, Haematitum, Magnetitum, Gypsum Fibrosum, Fossilia Dentis Mastodi, iron powder have drug effect for mental disease, especially for epilepsy induced by terror. 4. For Application of mineral substance, it should be considered that the chemical elements of mineral substance act on human body. 5. For drug effect, it is important to make clear of original prescription.

• 한국지역사회생활과학회지
• /
• 제28권2호
• /
• pp.203-215
• /
• 2017

This study was carried out to compare the major nutrient components and antioxidant activities of Stachys sieboldii Miq leaf and root powders. For proximate compositions, crude protein and crude fat contents of leaf powder were higher than those of root powder, whereas contents of crude ash and carbohydrates were lower in leaf powder. The content of glutamic acid was greater in amino acids of leaf and root powders, and contents of total amino acids and essential amino acids were higher in leaf powder compared with root powder. Root powder contained a higher level of total unsaturated fatty acids than leaf powder. Total contents of organic acids were higher in leaf powder; tartaric acid was the major organic acid in leaf powder, and malic acid was the major organic acid in root powder. The content of vitamin A was higher in leaf powder than in root powder. However, vitamin E content was higher in root powder than in leaf powder. Total mineral contents of leaf powder were higher than those of root powder, and mineral contents of leaf and root powders were in the order of K>Ca>Mg. Extract yields of leaf and root powders were 27.21% and 58.51%, respectively. Total polyphenols and total flavonoids of leaf extract were 236.35 mg/g and 1.90 mg/g, respectively, which were higher than those of root extract. The $IC_{50}$ values of leaf and root ethanol extracts based on DPPH hydroxyl scavenging were 0.69 mg/mL and 5934.31 mg/mL, respectively, and antioxidative activities of ethanol extracts from all Stachys sieboldii Miq parts dose-dependently increased. These results suggest that Stachys sieboldii Miq can be recommended as an edible functional food material.