• Journal of Biosystems Engineering
• /
• v.8 no.1
• /
• pp.17-29
• /
• 1983

The milling process is considered as causing one of the greatest grain losses among all the processes in rice post-production. Major source of grain losses in the rice milling is considered as the whitening process. This study was attempted to develop an abrasive-type whitener, the whitening chamber of which being supplied by jet-air evenly and continuously. To investigate the milling performance by the new whitener, three kind of emery-stone grit(#36, #41, and #46), and three levels of rotational speed of emery stone roller (950, 1070, and 1200 rpm) were tested. The jet-air abrasive-type whitener was also compared with the conventional abrasive-type having no jet-air blower in terms of their milling performance. In addition, the effect of different combinations of sequential uses of the abrasive- and friction-type whiteners on the milling performance was also experimentally evaluated. The results of this study are summarized as follows; 1. In general, the whitening system combined with the abrasive type whitener with jet-air supply, which was newly designed, and the existing jet-air friction type whiteners produces more milled- and head-rice by about 0.3% points and 2.8% points, respectively than the system combined with the existing abrasive type without the jet-air supply under the same operational conditions. The former also consumed less electricity by 0.024 KwH per 100kg of milled rice production and gave more milling capacity by about 35 kg/hr. As compared with the conventional whitening system consisting of jet-air friction type whiteners only, the former yielded more milled- and head-rice by 1.5% points and 4.4% points, respectively. 2. The abrasive roller having 46 grit emery was better than the roller having 36 grit in aspects of milling performance and machine efficiency, in general. 3. With regard to the effect of combination method of abrasive type and friction type whiteners, one pass in abrasive type plus three passes in friction type gave better milling performance and energy efficiency than the two passes in abrasive type plus two passes in friction type regardless of the designs of the emery stone rollers. 4. The increase in rotational speed of the emery stone roller from 950 rpm to 1200 rpm presented negative effects on milled and head-rice yields and machine efficiency, but slightly positive effect on milling capacity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.15-26
• /
• 1994

To understand the relative contribution of varietal and environmental variation on various grain quality components in rice, grain appearance, milling recovery, several physicochemical properties of rice grain and texture or palatability of cooked rice for milled rice materials of seven cultivars(five japonica & two Tongil-type), produced at six locations of the middle and southern plain area of Korea in 1989, were evaluated and analyzed the obtained data. Highly significant varietal variations were detected in all grain quality components of the rice materials and marked locational variations with about 14-54% portion of total variation were recognized in grain appearance, milling recovery, alkali digestibility, protein content, K /Mg ratio, gelatinization temperature, breakdown and setback viscosities. Variations of variety x location interaction were especially large in overall palatability score of cooked rice and consistency or set- back viscosities of amylograph. Tongil-type cultivars showed poor marketing quality, lower milling recovery, slightly lower alkali digestibility and amylose content, a little higher protein content and K /Mg ratio, relatively higher peak, breakdown and consistency viscosities, significantly lower setback viscosity, and more undesirable palatability of cooked rice compared with japonica rices. The japonica rice varieties possessing good palatability of cooked rice were slightly low in protein content and a little high in K /Mg ratio and stickiness /hardness ratio of cooked rice. Rice 1000-kernel weight was significantly heavier in rice materials produced in Iri lowland compared with other locations. Milling recovery from rough to brown rice and ripening quality were lowest in Milyang late-planted rice while highest in Iri lowland and Gyehwa reclaimed-land rice. Amylose content of milled rice was about 1% lower in Gyehwa rice compared with other locations. Protein content of polished rice was about 1% lower in rice materials of middle plain area than those of southern plain regions. K/Mg ratio of milled rice was lowest in Iri rice while highest in Milyang rice. Alkali digestibility was highest in Milyang rice while lowest in Honam plain rice, but the temperature of gelatinization initiation of rice flour in amylograph was lowest in Suwon and Iri rices while highest in Milyang rice. Breakdown viscosity was lowest in Milyang rice and next lower in Ichon lowland rice while highest in Gyehwa and Iri rices, and setback viscosity was the contrary tendency. The stickiness/hardness ratio of cooked rice was slightly lower in southern-plain rices than in middle-plain ones, and the palatability of cooked rice was best in Namyang reclaimed-land rice and next better with the order of Suwon$\geq$Iri$\geq$Ichon$\geq$Gyehwa$\geq$Milyang rices. The rice materials can be classified genotypically into two ecotypes of japonica and Tongil-type rice groups, and environmentally into three regions of Milyang, middle and Honam lowland by the distribution on the plane of 1st and 2nd principal components contracted from eleven grain quality properties closely associated with palatability of cooked rice by principal component analysis.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.72-85
• /
• 1983

Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.308-313
• /
• 2008

This study was carried out to analysis the factor effected by milling rice rate, and to provide the developing rice varieties and cultivation technology. Panicle numbers per spike of Ilpumbyeo and Chucheongbyeo were 105 and 70, respectively. The primary branch panicle rate was Ilpumbyeo 56.2% and Chucheongbyeo 61.4%. The secondary panicle rate of Ilpumbyeo and Chucheongbyeo was 43.3% and 37.9%, respectively. Grain filling rate using specific gravity showed that Ilpumbyeo was the lower filling rate than Chucheongbyeo. Hull weight per one grain was Ilpumbyeo 41.9 mg and Chucheongbyeo 3.92 mg, and hull weight per rough rice 1 kg was Ilpumbyeo 157.36 g and Chucheongbyeo 151.31 g. In milling rate, brown rice ratio by ripening degree of llpumbyeo and Chucheongbyeo with combine harvest was 81.22% and 82.52%. Milled/brown rice ration of llpumbyeo and Chucheongbyeo showed 92.14% and 92.51%. The milling recovery ratio of llpumbyeo was decreased 1.67% then Chucheongbyeo, and the difference was mainly due to the hull weight (0.61%), milled/brown rice ratio (0.37%) and ripening degree (0.69%). Although the varietal differences were found in hull weight and millied/brown rice ratio between llpumbyeo and Chucheongbyeo, the ripening degree was considered as the factor that could be reduced by cultivation technology and post-harvest management.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.302-306
• /
• 2010

'Migwang' is a new japonica rice variety developed from a cross between SR15926-10-2-3-3-3 having a good canopy architecture and multiple disease resistance, and Iksan431 having a translucent milled rice and good eating-quality with a view of developing a new variety having multiple disease resistance by the rice breeding team at NICS, RDA in 2009. The heading date of this variety is August 15 and later than check variety, Hwaseongbyeo, by four days. 'Migwang' has 75 cm of culm length and 98 spikelets per panicle. This variety showed longer heading delay and higher spikelet sterility than those of Hwaseongbyeo while exposed to cold stress. This variety showed resistance to blast disease and bacterial leaf blight, but susceptible to rice stripe virus and planthoppers. The milled rice of this variety exhibits translucent, clear non-glutinous endosperm and short grain shape. 'Migwang' has better palatability index of cooked rice than that of Hwaseongbyeo. The whole grain rate of milled rice and milled rice recovery of 'Migwang' are higher than those of Hwaseongbyeo as 96.8% and 73.1%, respectively. 'Migwang' has 5.5 MT/ha in milled rice. 'Migwang' could be adaptable to the middle plain area, mid-western and southeastern costal areas and mid-mountainous areas in Korea.

• Applied Biological Chemistry
• /
• v.34 no.3
• /
• pp.258-261
• /
• 1991

In order to establish the optimum drying temperature of the heated air blast-grain circulation dryer, a 2 ton scale of paddy was used in this experiment. The temperatures of heated air used were 45, 50, 55, 60, 65 and $70^{\circ}C$. Moisture content of the paddy was reduced to 15% from 24% by drying. The higher air temperature, the shorter drying time and the less fuel consumed. The portion of cracked kernels was found to be low as $3{\sim}10%\;at\;40{\sim}55^{\circ}C$, but was very high to $28{\sim}30%\;at\;60{\sim}70^{\circ}C$. The germination percent was very high as 98 and 93% at 40 and $45^{\circ}C$, but it was decreased to 86 and 30% at 50 and $70^{\circ}C$, respectively. The recovery yield of milled rice from paddy was decreased by 1.76, 2.63 and 7.52% at 60, 65 and $70^{\circ}C$, respectively, compared with 75.86% as drying at $40^{\circ}C$. The higher heated air temperature, the less head rice of milled rice was recovered, and the decreased ratio was increased $60^{\circ}C$. The higher heated air temperature, the less alkali disintergation value and gel consistency of milled rice and the more water up take, expanded vlume, total solid in residual liquid and intensity of starch iodine blue value of residual liquid, and those tendency was found clear from $60^{\circ}C$ temperature of heated air.

• Korean Journal of Food Science and Technology
• /
• v.42 no.5
• /
• pp.632-636
• /
• 2010

The level of ${\gamma}$-aminobutyric acid (GABA) in pigmented rice was quantitatively and qualitatively determined by high pressure liquid chromatography/fluorescence detection (HPLC/FLD). In this study, the recovery rate and limit of detection (LOD) of GABA were 122.4${\pm}$2.4% and 0.23 ${\mu}g/g$, respectively. The geminating pigmented rice samples, which were harvested in Paju, Korea, were soaked in water at $18^{\circ}C$ for 20 hr. After soaking, the samples were germinated at $30^{\circ}C$ for about 24 hr. GABA content was highest (293.0 ${\mu}g/g$) in the germinated red rice. Furthermore, GABA levels in the germinated rice increased significantly by up to 11.1 and 24.7-fold as compared to non-germinated rice and milled rice, respectively. The GABA concentrations of non-germinated rice, with the exception of red rice, were significantly higher than those of milled rice by 7.6-20.6-fold.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.585-591
• /
• 2002

국내에서 개발된 연속식 현미조절기를 이용한 현미 가수처리 여부에 따른 도정수율의 변화를 알아보기 위해 경남 진주 농협 미곡종합처리장, 경기 여주의 미곡종합처리장 및 경기 용인의 농협 미곡종합처리장에서 검증실험을 실시하였다. 현미의 조절을 위한 가수처리 여부에 관한 실험 결과를 요약하면 다음과 같다. 1. 조질에 따른 현미 함수율의 측정값과 예측값의 차이는 진주, 여주의 경우는 각각 0.07%, 0.13%로 미소하게 나타났으며, 용인의 경우는 0.18%로 예측값이 낮게 나타났다. 2. 쇄미 발생량을 분석한 결과, 진주 농협의 경우 2.85 kg, 여주 농협의 경우 5.47 kg, 용인 농협의 경우 5.47 kg 감소되는 것으로 나타났다. 3. 도정수율 변화는 진주농협 1.21 %, 여주 0.87%, 용인 농협 1.00%의 상승을 보였다.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.3
• /
• pp.249-254
• /
• 2019

'Japonica 6' is a japonica rice variety developed from a cross between 'MS11', the beginning variety adaptable to tropical region, and 'IR86743-28-1-4', an elite line of high yield and good plant type by a Korea(RDA)-IRRI cooperative breeding program at IRRI in 2017. The growth duration of 'Japonica 6' is 121 days from sowing to harvest. It is 10 days later than that of the check variety 'MS11'. The culm length of 'Japonica 6' is 70 cm, and 1,000-brown rice grain weight is 26.7 g. It has a shorter culm and a larger grain. size than that of MS11. 'Japonica 6' is moderately resistant to blast disease but susceptible to bacterial blight, tungro virus and plant hoppers. The milled rice recovery rate of 'Japonica 6' is improved than that of 'MS11'. The head rice rate of 'Japonica 6' is significantly higher than that of 'MS11'. Yield of 'Japonica 6' is averagely 3.59 MT/ha of milled rice in 5 areas of the Philippines. The 'Japonica 6' was registered in Philippines and would be adaptable to the diverse regions of tropical Asia (Registration No in Philippines. BPI-NSIC-2017-Rc 484SR).

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.1015-1026
• /
• 2021

The objective of this study was to determine amino acid and protein contents of brown and milled non-glutinous rice of 13 cultivars in Korea. Protein contents of MRs (milled rices) were in order of Haepum (7.27%) > Hanareum No. 4 (7.14%) > Odae (6.84%). Protein contents of BRs (brown rices) were in order of Haepum (7.68%) > Odae (7.63%) > Hanareum No. 4 (7.60%). The amino acid content was the highest in Haepum (MR 5.76%, BR 6.49%), followed by Haedeul (MR 5.71%, BR 6.30%), and Odae (MR 5.63%, BR 6.29%). The essential amino acid contents of non-glutinous rices were in order of Haepum (MR 2.34%, BR 2.57%) > Haedeul (MR 2.31%, BR 2.48%) > Odae (MR 2.20%, BR 2.56%). The contents of amino acid and protein in BRs were considerably higher than those in MRs. Protein and most of amino acid contents were higher in Haepum than the other cultivars. The certificated reference material (CRM) 1849a (infant/adults nutritional formular) from National Institute of Standard and Technology (NIST) was used as the test sample to determine the precision and accuracy of the analytical method. The regression analyses revealed good correlations (correlation coefficient), greater than 0.99. The recovery values of the amino acids ranged from 93.17 to 99.59%. The limit of detection (LODs) ranged from 0.01 - 0.07 mg·100 g^-1 and the limit of quantitation (LOQs) ranged from 0.03 - 0.21 mg·100 g^-1 for all analytes.