• Earthquakes and Structures
• /
• v.26 no.3
• /
• pp.175-189
• /
• 2024

Aiming at studying the plastic hinge (PH) evolution regularities and failure mode of rocking wall moment frame (RWMF) structure in earthquakes, the whole-working history analysis of seismic performance state of RWMF structure based on co-operation performance and PH evolution was carried out. Building upon the theoretical analysis of the elastic internal forces and deformations of RWMF structures, nonlinear finite element analysis (FEA) methods were employed to perform both Pushover analysis and seismic response time history analysis under different seismic coefficients (δ). The relationships among PH occurrence ratios (R_ph), inter-story drifts and δ were established. Based on the plotted curve of the seismic performance states, evaluation limits for the R_ph and inter-story drifts were provided for different performance states of RWMF structures. The results indicate that the R_ph of RWMF structures exhibits a nonlinear evolution trend of "fast at first, then slow" with the increasing of δ. The general pattern is characterized by the initial development of beam hinges in the middle stories, followed by the development towards the top and bottom stories until the beam hinges are fully formed. Subsequently, the development of column hinges shifts from the bottom and top stories towards the middle stories of the structure, ultimately leading to the loss of seismic lateral capacity with a failure mode of partial beam yield, demonstrating a global yielding pattern. Moreover, the limits for the R_ph and inter-story drifts effectively evaluate the five different performance states of RWMF structures.

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.127-136
• /
• 2003

The top-to-bottom compression strength of corrugated board box is the most important mode of loading during it's no, and it depends largely on the edgewise compression strength of the corrugated board in the cross-machine direction and to a considerable extent on the flexural stiffness in both principal directions (CD; cross-machine direction, MD; machine direction) of the corrugated board. Corrugated board is a sandwich structure with an orthotropic property. The purpose of this study was to elucidate the principal design parameters for board combination of corrugated board from the viewpoint of bending strength through the finite element analysis [FEA] fur the various corrugated board. In general, the flexural stiffness [FS] in the MD was 2-3 times larger than that in the CD, and the effect of liner for the FS of corrugated board was much bigger than that of corrugating medium. The flexural stiffness index [FSI] was high when the stiffness of liner was in the order of inner, outer, and middle liner in double-wall corrugated board [DW], and the effect of the stiffness arrangement or itself reinforcement of corrugating medium on the FSI was not high. In single-wall corrugated board [SW] with DW. the variation of FSI with itself stiffness reinforcement of liner was much bigger than that with stiffness arrangement of liner. The highest FSI was at the ratio of about 2:1:2 for basis weight distribution of outer, middle, and inner liner if the stiffness of liner and total basis weight of corrugated board were equal in DW Secondarily. basis weight was in the order of inner, outer, and middle liner. However, the variation of FSI with basis weight distribution between liner and corrugating medium was much bigger than that with itself basis weight distribution ratio of liner and corrugating medium respectively in both DW and SW. md the FSI was high as more total basis weight was divided into liner. These phenomena fur board combination of corrugated board based on the FEA were well verified by experimental investigation.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.47-56
• /
• 2011

In general, shear walls are employed as lateral resistance system. Most of shear wall structures require openings in shear walls and thus shear walls are linked by floor slabs or coupling beams resulting in the coupled shear wall structures. In this study, an LRB (lead rubber bearing) was introduced in the middle of the coupling beam of the coupled shear wall structures and the wind-induced response reduction effect of this system was investigated. In order to evaluate the control performance of the proposed method, 20- and 30-story building structures were used as example structures and boundary nonlinear time history analyses have been performed using artificial wind excitation. Japanese vibration evaluation criteria was employed to evaluate whether the proposed system could improve the serviceability of the tall coupled shear wall structures under wind excitation. Based on analytical results, it has been shown that the proposed method that connects shear walls with LRBs can improve the wind-induced response control effect.

• Journal of Chest Surgery
• /
• v.30 no.4
• /
• pp.445-448
• /
• 1997

Percutaneous transthoracic fine needle biopsy has been widely used In the diagnosis of pulmonary lesions especially lung cancer. Onc of the rarest complication's is that malignant cells are implanted within the needle tract and developed a chest wall mass subsequently. Wc expcrlenccd a case of chest wall implantatio of lung cancer after percutaneous transthoracic floe needle biopsy. A 65-ycar old man had undergone bilobectomy (right upper lobe and right middle lobe)for squamous cell (·4rcinoma (TINOMO) of the lung. 60 days after percutaneous biopsy (48 days after operation), a tiny nodule (1 mm sized) was notcd at the right anterior chcst wall where the diagnostic fine needle biopsy had been performed before operation. This tiny mass was rapidly growing to 1.5 cm sized mass for 20 days. We carried out wide excision of chest wall mass and skin grafting, and confirmed squamous cell carcinoma histopathologically as same as the lung cancer.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.2
• /
• pp.155-164
• /
• 2016

The changes in earth pressure and ground settlement due to the underground excavation nearby the existing retaining wall according to the separation distance between underground excavation and retaining wall, were studied experimentally. A soil tank having 160 cm in length and 120 cm in height, was manufactured to simulate the underground excavation like tunnel by using 5 separated bottom walls. The variation of earth pressure was measured according to the excavation stages by using 10 separated right walls simulating the retaining wall. The results showed that the earth pressure was changed by the lowering of first bottom wall(B1), however the earth pressure was not changed significantly by the lowering of third bottom wall(B3) since B3 had sufficient separation distance from retaining wall. Lowering of first bottom wall(B1) induced the decrease of earth pressure in lower part of retaining wall, on the contrary, lowering of first bottom wall(B1) induced the increase of earth pressure in middle part of retaining wall proving the arching effect.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.207-216
• /
• 2006

Even though the notion exists that wall paper has got a short durability for interior decoration in terms of paper's nature, it can be the most important element among the modern dosing wall papering because of the variation of the walls visual effect. Wall paper hasn't been preserved well according to the paper's character and official records haven't been done well. So, by studying a case in which a room is maintained well, seeing various commercial samples which were used for an advertisement and reading several booklets it is possible to study historical evidence. In regard to wall paper and Papering. data, the commercial historic nature of the traditional wall papering has been recognized again in order to study the root of the technical and commercial background. In theory, the historic background research of traditional wall paper in the past is said to have established its theoretical system and the development of modern wall papering in the middle of Britain in 18th century. Through the theoretical study of wall papering, the following things have been researched: handling don the method of the traditional wall papering and lining paper, stylization of pattern by using the method of continual linking, subdivision of commercial cost and specialization of wallpaper, handing down the past traditional adhesion method, the origin of string wallpaper, utility of traditional wallpaper and its various abilities, the change from the face to face linking to duplicated linking, the development of DIY products by women's wallpaper selections. Put against other materials, wallpaper remains the most popular and preferable product for managing a wall and provides a decorative, wall dosing technique. This study can estimate the source of wallpapering history in order to create a systemic approach towards the future's wallpaper industry. This is very important data in order to establish a theoretical system of traditional wallpapering according to its historical research about wallpapering skills and its commercial aspect.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.9
• /
• pp.1079-1085
• /
• 2001

Objective : We analysed various surgical approaches and surgical results of 28 middle cranial base tumors for the purpose of selecting optimal surgical approach to the middle cranial base tumor. Methods : In this retrospective review, 28 patients, including 16 meningioma, 6 trigeminal neurinoma, 2 pituitary adenoma, 2 craniopharyngioma, 1 facial neurinoma, and 1 metastatic tumor, underwent surgical treatment using skull base technique. Of theses, 16 tumors were mainly confined to middle cranial fossae, 5 tumors with extension into both anterior and middle fossa, and 7 tumors with extension into both middle and posterior fossa. Tumors that confined to the middle cranial fossa or extended into the anterior cranial fossa were operated with modified pterional, orbitozygomatic or Dolen'c approach, and tumors that extended into the posterior cranial fossa were operated with anterior, posterior or combined transpetrosal approach. Completeness of tumor resection, surgical outcome, postoperative complication, and follow up result were studied. Results : Total tumor removal was achieved in 9 tumors of 10 tumors that did not extended to the cavernous sinus, and was achieved in 7 tumors of 8 tumors that extended to the lateral wall of the cavernous sinus. Of 10 tumors that extended to the venous channel of the cavernous sinus, only 2 were removed totally. Surgical outcome was excellent in 14 patients, good in 10, fair in 2 and poor in 2. There were no death in this series. Dumbell type tumor which extended into both middle and posterior fossae showed tendency of poor prognosis as compared with tumors that confined middle cranial fossa and extended into both anterior and middle cranial fossa. Postoperative dysfunctions were trieminal hypesthesia in 3, oculomotor nerve palsy in 2, abducens nerve palsy in 2, hemiparesis in 2, cerebellar sign in 1, facial palsy in 1 and hearing impairment in 1. Conclusion : Based on our findings and a review of the literature, we conclude that, when selecting the surgical approach to the middle cranial fossa tumors, the most important factors to be considered were exact location of the tumor mass and existence of the cavernous sinus invasion by tumor mass. We recommend modified pterional or orbitozygomatic approach in cases with tumors located anterior and middle cranial base, without cavernous sinus invasion. In cases with tumors invading into cavernous sinus, we recommend Dolen'c or orbitozygomatic approach. And in lateral wall mass and the cavernous sinus, it is preferred to approach the tumor extradurally. For the tumor involing with middle fossa and posterior fossa(dumbell type) a combined petrosal approach is necessary. In cases with cavernous sinus invasion and internal carotid artery encasement, we recommend subtotal resection of the tumor and radiation therapy to prevent permanent postoperative sequele.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4184-4194
• /
• 2024

New technologies in polymer synthesis and pipe extrusion equipment have led to the commercialization of high-performance, large-diameter, thick-wall high density polyethylene (HDPE) pipes. They have been used in the field of seawater transport and cooling to replace metal pipes, due to their advantages of high corrosion resistance and extensibility. Connection of HDPE pipe is important as it determines the safety of the entire piping system. Butt fusion welding is commonly used for HDPE pipe connection but may cause the formation of weak points in the welded joints, interfering the reliability of the pipeline system in the application of nuclear power plants. At present, there is a lack of research on evaluating the performance of welded joint for large-diameter thick-wall HDPE pipes made by butt fusion-welding. The purpose of this study is to investigate the influence of three different butt fusion-welding processes, i.e., single low pressure (SLP), single high pressure (SHP) and dual low pressure (DLP), by evaluating the performance of their welded joints, including characterizing tensile strength, extensibility, crystallinity and hardness. In specific, a thick-wall HDPE pipe with OD of 812.8 mm and wall thickness of 74 mm which is certified for nuclear safety class was used for study. Representative specimen from the outer, middle and inner part across the wall of the main pipe body and welded joints were taken for testing. Different test methods and specimens were designed to assess the feasibility of evaluating the welding performance from different welding process. The results showed that the mechanical properties of different locations of the welded joints were different, and the tensile strength and fracture energy of the middle part of the joint were lower than that of the inner and outer parts, which could be caused by the difference in the crystallinity and thickness of the melting zone influenced by welding processes, as can be seen from the analysis of DSC test and morphology observation. Hardness testing was conducted on the section of the welded joints, and it revealed that the micromechanical properties of the welded joints in the region of the heat-affected zone were enhanced significantly, which may be due to the annealing effect caused by welding process. In summary, The DLP process resulted in the best extensibility of the welded joints among three processes, suggesting that the joining pressure from welding process plays an important role in affecting the extensibility of the welded joints.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.79-85
• /
• 2007

This paper addresses the indoor air quality when radiant floor heating is applied in large space. Radiant heat exchange between surfaces depends on the orientation and the temperature of the surfaces. Also, the temperature and the radiant characteristic of the wall and the roof that face the floor have great influence on the indoor air environment due to the largeness of the wall and the roof in large spaces. In this study, we simulate a test-cell(25X20X10) using a ies YE And using a CFD(microflo in VE), an indoor air environment was investigated to establish the optimum temperature of floor. At the first time of the heating, high floor temperature is demanded. At the middle of the heating, however, the temperature of the residential space was formed appropriately, although the temperature of the floor was set low.

• Journal of Plant Biology
• /
• v.34 no.2
• /
• pp.107-112
• /
• 1991

The atrichomatous wall of ovary in Calotropis procera becomes highly pubescent in the young fruit, but scabrous I the mature fruit. The single layered epicarp develops from the outer epidermis of the ovary wall. The mesocarp which develops from the mesodermis is distinguished into outer, middle and inner zones. The central mesocarp breaks up in the course of fruit development and disintegrate to form large air chambers. The 2-3 layered lignified endocarp develops from the inner epidermis as well as from the inner mesodermis layers of the ground tissue and shows a‘parquetry pattern’of cell arrangement in surface view. The parenchymatous becomes aerenchymatous in the mature fruit. Fruit dehiscence in marginicidal (ventricidal).