• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.120-121
• /
• 2013

Apartment houses maintenance like remodeling in at issue and the importance is getting higher. On this study, we analyzed a variety of the influence factor affected building's maintenance expenses. circumstance influence factor about maintenance expenses is classified into region(big city, small and medium city), (area of high snowfall), (downpour region), (earthquake region), location(waterfront, inland province), using condition(mixed use, single use), frequency of use(kindergarten, middle school, high school), architecture method(reconstruction, construction).

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.554-558
• /
• 2015

With the increasing movement towards sustainable construct on, environmental rating systems (ERSs) came into use in the Middle Eastern (ME) region as similar to many other regions. ERSs were first developed to assess buildings and many ERSs have tended related ERSs. Despite the vast infrastructure development in the ME region and in the United Arab Emirates in particular, there is no understand the regional-specific requirements to attain sustainable construction and infrastructure. Tis research addresses these pags and study the theoretical underpinnings of sustainable infrastructure in the region, to propose a regional-specific, infrastructure-related ERS. This paper examines the underpinning factors of sustainable infrastructure in the UAE through a literature review in order to provide insights to determine criteria and subcriteria for the ERS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2474-2479
• /
• 2012

A sensorless vector control of an induction motor provides a good performance in the middle and high speed region. However, in the low speed region, it is very difficult to implement the sensorless vector controller because the feeding voltage measured by the motor is very low. In this paper, to improve the performance of a sensorless vector control of an induction motor in the low speed region under 3Hz, we proposed the fuzzy logic controller using the zooming algorithm. To verify the performance of the proposed controller, an experiment has been performed.

• Korean Journal of Heritage: History & Science
• /
• v.36
• /
• pp.87-104
• /
• 2003

The Chungdo-type Pottery Culture, distributed through the middle part of the Korean peninsula, is chronologically located in the very former stage of the advent of ancient states. It has two different traditions of pottery manufacturing technique which are totally different in choosing raw materials, shaping, fixing and firing. It seems that two different traditions had been selectively applied by pottery type. In order to understand this peculiar cultural aspect, the pottery typology needs to be different from those applied to cultures where pottery was made and used under the single manufacturing tradition. This study tries to find the new pottery typology which best fits for the understanding the chronology of the Chungdo-Type Pottery Culture. For this purpose, I examined existing typologies, recognized their problems, and then build a new typology. As a result, I found that the former typologies misinterpreted the relative frequencies of each pottery type as different function or region. In this article, I propose the new pottery typology as building a primary classification within each function and region, and then synthesizing all of primary classifications. This new typology eliminates the factors of function and region in understanding the chronology of the Chungdo-Type Pottery Culture, and assorts the regional distinction by comparing pottery types in each region.

• Economic and Environmental Geology
• /
• v.8 no.1
• /
• pp.25-56
• /
• 1975

Most fluorite deposits of South Korea are distributed in three metallogenic zones namly as: Hwacheon, Hwangangni and Geumsan metallogenic zones. Fluorite deposits of each zone show The characteristic features owing to the geological setting, the structural patterns and their forming processes. deposits of the Hwacheon metallogenic zone are wholly fissure filling hydrothermal veins emThe bedded in shear fractures of the granite gneiss or schists of Precambrian age or in the cooling fractures of the granite and acidic hypabyssal rocks which are assumed to be a differentiated sister rock of the granite. Localization of most fluorite veins of the region is structurally controlled by NW and EW fracture systems and genetically related to the granite intrusion which ascertained as motivating rock of the fluorite mineralization. Fluorites are in most cases accompanied by quartz, chalcedony mainly and rarely agate, calcite, barite and sulphide base metals in some localities. The deposits of the Hwangangni metallogenic zone were formed at the last stage of hydrothermal polymineralization of W, Mo, Cu, Pb, Zn. The majority of the fluorite ore bodies were originated from replacement in limestone beds of Great Limestone Series or in calcareous interbeds of metasediments, whereas some cavity-filling ore bodies were embedded in phyllites and schists of the Ockcheon system and along the fissures in the replaced beds which were originated by volume decrease. The localization of fluorite deposits in this region is genetically related to the Moongyong granite which has been dated as middle Cretaceous, and controlled structurally by the $N20^{\circ}{\sim}50^{\circ}W$ extension fracture system or axial planes of folds, and by faults of NE direction that acted as paths of ore solution. The deposits of the Geumsan metallogenic zone are seemed to be formed through the similar process as that of Hwangangni metallogenic zone, but characteristic distinctions are in that they are more prevailing fracture filling veins and large number of the deposits are localized in roof-pendants or xenolithes of limestone in granites and porphyries. Igneous rocks that presumably motivated the mineraltzation are middle Cretaceous Geumsan granite and porphyries. Metallogenic epoch of the fluorite mineralization of South Korea are puesumably limited in early-middle Cretaceous. Studies of the fluid inclusions in fluorites of the region reveal that the homogenization temperature of the fluorite deposits are as follows: Hwacheon metallogenic zone : $95^{\circ}C{\sim}165^{\circ}C$; Hwangangni metallogenic zone : $97^{\circ}C{\sim}235^{\circ}C$; Geumsan metallogenic zone : $93^{\circ}C{\sim}236^{\circ}C$. Judging from the above results, the deposits of the Hwancheon region were formed at the epithermal stage, and those in the Hwangangni and Geumsan regions, were deposited at epithermal stage preceded by mesothermal mineralization of small scale in which some sulphide minerals were deposited. The analytical data of minor elements in the fluorites reveal that ore solutions of Hwangangni metallogenic zone seemed to be emanated in more acidic stage of magma differentiation than Hwacheon metallogenic zone did.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.193-203
• /
• 2019

The aim of this study was to analyze the relationship between rice yield and climate elements in Daegu (southern plain area) and Andong (inland mountainous area) regions. Over the past 20 years, rice yield has increased in both regions. The rice yield of middle and mid-late maturing cultivars in the recent 5 years increased by about 10% and 18%, respectively, compared to that produced in the early 2000s in the Daegu region. In the Andong region, the rice yield of mid-late maturing rice cultivars in the recent 5 years was higher by about 7% than that of the early 2000s. The number of panicles per hill and grain ripening rate significantly affected rice yield in mid-late maturing cultivars. In addition, the grain weight and grain ripening rate significantly affected rice production in middle maturing cultivars grown in the Daegu region. With regard to the middle maturing cultivars, the relationship between grain weight and rice yield had a positive significant correlation in both regions. To understand the effect of climate factors on rice yield, the milled rice yield of several rice cultivars produced over the past 20 years (1999-2018) at both locations, Daegu and Andong, were evaluated. The rice yields increased owing to long sunshine duration during the grain filling stage in the Daegu region. In Andong, rising maximum temperature during the vegetative stage increased rice yield of early and mid-late maturing cultivars. Long sunshine hours increased yield of mid-late maturing cultivars in both regions.

• Journal of the Korean Society of School Health
• /
• v.21 no.2
• /
• pp.35-46
• /
• 2008

Purpose: This study was a part of preliminary survey for establishing Korean HPS(Health Promoting School) model which was originally suggested by WHO. Methods: Three elementary and middle schools were sampled in urban and rural area across three level of social-economic status, and survey was conducted on one class in each grade by random selection. To measure mental health and social and familial factors, self-esteem scale, self-efficacy scale, depression scale, family cohesion scale, parent-child communication scale, adolescent's mental health and problem behavior questionnaire(AMPQ), and other question items about family status and economic level were conducted. Students' mental health level was compared by region, sex, grade, and other familial and economic factors. Results: Familial and social factors such as economical and educational level of parents, number of family members were different between rural and urban area. Also, students of rural area got lower scores at self-esteem, self-efficacy, but higher scores at extroverted problem behavior than their urban counterparts. In pre-school students, high grade students' self-esteem, and family cohesion scores were lower than low grade students. And sexual differences were found across problem behavior domain and region in middle school students. Especially, the students of single-parent family and lower economic family got insistently low scores at various mental health related scales. Conclusion: These results should be considered, when the HPS model is designed and applied in Korea.

• Journal of architectural history
• /
• v.21 no.3
• /
• pp.73-92
• /
• 2012

This study mainly inquired characteristics and changes of 'Chang-aelgool' through 38 cases(with 161 Ssang-chang) of annex and pavillion buildings in Yeong-nam region which are built during the Chosun dynasty. The method of inquiry included actual survey of windows along with bibliographical research, and the results are as below. First, through the discovery of the term 'Chang-aelgool' as an indication of the window-forming frame in 'YeongGeonUiGwe'(1680 A.D), it is apparent that the term 'Chang-aelgool' was widely used in Korea from the late 17th century. Second, the 'Chang-aelgool' of study objects are classified into 4 categories. Type I and II are comprised of mitre-joints which cover the 4 corners of 'Chang-aelgool' and mainly used in building annex and pavillion buildings during the early period of the Chosun dynasty. Type III was widely used during the early and middle period of the Chosun dynasty and drastically dropped in number during the late period of the dynasty. Type IV is comprised of mitre-joint of the upper-half, tenon-jointing of the lower-half and widely used in annex and pavillion building during the late period of the Chosun dynasty. Third, the form of 'Chang-aelgool' has changed from rectangular form with longer width during the early period of Chosun dynasty to square form during the middle period and eventually ended up as a rectangular form with longer height during the late period of the dynasty. Fourth, it is considered that while mullion which is located in the center of 'Chang-aelgool' was mainly used around the main floored room during the early period of the Chosun dynasty, became commonly used in main floored room and 'ondol' rooms during the middle period and drastically dropped in number from then and ended up being not in use after the mid 18th century.

• Biomolecules & Therapeutics
• /
• v.8 no.2
• /
• pp.160-166
• /
• 2000

The present study examined influence of various ischemic duration on extent of focal ischemic brain injury induced by middle cerebral artery occlusion (MCAO) in rats. The MCAO was produced by insertion of a 17 mm silicone-coated 4-0 nylon surgical thread to the origin of MCA through the internal carotid artery for 30, 60, 90, 120 min (transient) or 24 hr (permanent) in male Sprague-Dawley rats under isoflurane anesthesia. Reperfusion in transient MCAO models was achieved by pulling the thread out of the internal carotid artery. Only rats showing neurological deficits characterized by left hemiparesis and/or circling to the left, were included in cerebral ischemic groups. The rats were sacrificed 24 hr after MCAO and seven serial coronal slices of the brain were stained with 2,3,5-triphenyltetrazolium chloride. Infarct size was measured using a computerized image analyzer. Ischemic damage was common in the frontoparietal cortex (somatosensory area) and the lateral segment of the striatum while damage to the medial segment of the striatum depended on the duration of the occlusion. In the 30-min MCAO grouts, however, infarcted region was primarily confined to the striatum and it was difficult to clearly delineate the region since there was mixed population of live and dead cells in the nucleus. Infarct volume was generally increased depending on the duration of MCAO, showing the most severe damage in the permanent MCAO group. However, there was no significant difference in infarct size between the 90-min and 120-min MCAO groups. % Edema also tended to increase depending on the duration of MCAO. The results suggest that the various focal ischemic rat models established in the present study can be used to evaluate in vivo neuroprotective activities of candidate compounds or to elucidate pathophysiological mechanisms of ischemic neuronal cell death.

• Korean Journal of Metals and Materials
• /
• v.48 no.11
• /
• pp.1021-1027
• /
• 2010

The charpy impact property was lower at the surface and middle regions than that at the root region in metal welded by Tandem EGW of 82 mm thick EH40-TM steel plates. Temperature distribution in the weld sample and the heating/cooling temperature throughout the various regions in the weld metal were estimated by the commercial weld simulation program SYSWELD. The microstructure of the weld metal consisted of acicular ferrite and grain boundary ferrite. Grain boundary ferrite in the acicular ferrite matrix was found more in the surface and middle regions than in the root region, and the acicular ferrite was also coarser in the surface and middle regions where the impact toughness was lower and the input temperature was higher. Our results indicated that the impact toughness property was related to the microstructure morphology, the distribution of grain boundary ferrite, and the acicular ferrite.