• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.3
• /
• pp.114-119
• /
• 2001

An automatic train operation(ATO) system executes the operation of constant speed travelling and fixed point parking by using microprocessors instead of driver's manual operation. This paper describes the mathematical model for the train considering unknown disturbances which consist of start resistance, travelling resistance, slope resistance, curve resistance, and so on. The speed controller of ATO system is designed by considering the disturbances. The simulation is executed to verify the speed control and fixed point parking performance and to compare its performance with that of a PID-type ATO control system under disturbances. Simulation results show that the control performance of gain scheduled control scheme for ATO system is better than that of the conventional PID controller.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.1-6
• /
• 1997

This paper describes the design of a network interface controller (NIC) chip which is to be used to support a novel adaptive virtual cut-through routing method for parallel compute systems with direct (i.e., point-to-point) interconnection networks. The NIC chip is designed to provide the interface between a processing node constructed from commercially available microprocessors and another custom-designed router chip, which in turn performs the actual routing of packets to their respective destinations. The NIC, designed using a semi-full-custom VLSi design technique outperform traditional wormhole routing with a minimal amount of hardware overhead. The NIC design has been fully simulated and laid out using a 0.8$\mu\textrm{m}$ CMOS process.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.3
• /
• pp.391-395
• /
• 1998

The impact of LDD structure on the single-poly EEPROMs is investigated in this paper. The single-poly EEPROMs are fabricated using the 0.8$\mu\textrm{m}$ CMOS ASIC process. The single-poly EEPROMs with LDD structure have slower program and erase speeds, but the drain and gate stresses and the endurance characteristics of these devices are much better than those of the single-poly EEPROMs with single-drain structure. The single-poly EEPROMs with LDD structure do not require the process modifications and need no additional masks, hence can be used for microprocessors and logic circuits with low-density and low-cost embedded EEPROMs.

• 한국IT서비스학회:학술대회논문집
• /
• 2009.11a
• /
• pp.544-548
• /
• 2009

The underlying success of logistics depends on the flow of data and information for effective management. Over the last 30 years, we have seen the power of microprocessors double about every 18months. This continuing trend means that computers will become considerably smaller, cheaper, and more abundant; indeed, they are becoming ubiquitous and are even finding their way into everyday objects, resulting in the creation of smart things. In the long term, ubiquitous technologies will take on great economic significance. Industrial products will become smart because of their integrated information processing capacity, or take on an electronic identity that can be queried remotely, or be equipped with sensors for detecting their environment, enabling the development of innovative products and totally new services. The global marketplace runs on logistics, security, speed, agility and flexibility..In this paper we report that pairing these traditional logistics functions with RFID technology can be a huge value-driver for companies. This winning combination yields increased logistics management effectiveness and more efficient visibility into the supply chain management.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.583-592
• /
• 1999

In order to control systems which contain nonlinearities control strategies must deal with the effects of them. Since most of control methods based on system mathematical models have been mainly developed focused on stability robustness against nonlinearities or uncertainties under the assumption that controlled systems are linear time invariant they have certain amount of limita-tions to smartly improve control perfomances of systems disturbed by nonlinearities or uncertainties. In this paper the fuzzy PID control law is suggested which can improve control performances of the nonlinear heavy load hydraulic systems disturbed by nonlinearities and uncertainties. Although the derivation process is based on the design process similar to general fuzzy logic con-troller resultant control law has analytical forms with time varying PID gains rather than linguis-tic forms so that implementation using commn-used versatile microprocessors can be achieved easily and effectively in real-time control aspect.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.245-248
• /
• 2010

Almost all of control schemes proposed so far have been designed in the continuous-time domain theoretically. Actual systems, however, have been implemented in the discrete-time domain since Micro Control Unit(MCU) and/or microprocessors have been used for the controllers. Thus, the overall system turned to be a sampled-data system, and generally speaking, the ultimate error cannot converge to zero in the actual system even though the proposed control algorithm showed the asymptotic stability in the continuous-time domain. In this paper, therefore, the ultimate error bound of a sampled data system with a short sampling period has been investigated. The ultimate error is shown to be related in the sampling period.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.423-428
• /
• 2010

In the initial design phase of superscalar microprocessors, a performance model is necessary. A theoretic performance model is very useful since performance for various architecture parameters can be obtained by simply computing equations, without repeating simulations, Previous studies established theoretic performance models using the relation between the instruction window size and the issue width, with the penalties due to branch mispredictions and cache misses. However, the study was intended for unlimited number of functional units, which is insufficient for the real case application. This paper proposes a superscalar microprocessor theoretical performance model which also works for the limited functional units. To enhance the accuracy of our limited functional unit model, instruction dependency rates are employed. By using trace-driven data of SPEC 2000 integer programs as input, this paper shows that the theoretically computed performance of superscalar microprocessor with limited number of functional units is quite similar to the measured performance.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.1
• /
• pp.46-55
• /
• 2008

In this paper, we designed the bay control unit that is based on the microprocessors and integrates with the new technology of electrical, electronic, and mechanical fields. Nowadays the customers have required much more integrated multi-protection relay, monitoring, control devices and power management for better and easier maintenance, performance, electrical system analysis and communication according to new trend of switchboard This bay controller supplies those requirements of customers with easy handling and operation. This bay controller provides a graphic display with rear-lit liquid crystal LCD and push buttons as kinds of HMI(Human Machine Interface). This bay controller provides the parameter setting program, control setting program, various editors and fault recording and analysis program on Windows/95/98/NT/2000/XP for HMI. In addition, this bay controller can be set manually and this manual setting function helps user to interface easily.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.4
• /
• pp.109-120
• /
• 1983

This paper presents standard program which can be used in the software realizations of sequential logic circuits. Thy are simple, flexible, and independent of applications and operate in the same way that man decides next states and outputs using the state transition table. With proposed programs, designers who aren't familiar with microprocessors and programming techniques will be able to design sequential logic circuits easily. Examples are illustrated, in order to prove their flexibility and adaptability, using Z-80 microprocessor.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.344-351
• /
• 2000

Recently, the microprocessor with network function based-controlled systems instead of conventional microprocessors is widely used to industrial applications, and also those technologies are widely adopted for train control and monitoring in modern rapid transit systems such as railway vehicles. The purpose of this paper is to propose a high quality data transmission line of railway vehicle system controlled by a microprocessor, which was designed and realized through SMG 7＆8 and ISA project. Noise, distortion and attenuation are always present in data transmission system and strictly limit performance. This paper describes a method to calculate the propagation constant, attenuation constant, phase velocity and length of stub.