• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.3
• /
• pp.91-95
• /
• 2004

The pulsed power system is widely available for use in pulse generator applications. Generally, the pulse generator is required for very short pulse width and high peak value. We have designed and fabricated our own pulsed type power system and through its use, we investigated microbe removal characteristics. This paper introduces a simple pulsed power system for removing various microbes caused by dirty water. This system includes a 2 times power supply circuit, IR2110 operated by using a fixed voltage regulator 7812 and 7805, and the switching MOSFET (Metal Oxide Semiconductor Field Effect Transistor). We can also control this process by using a PIC one chip microprocessor. As a result, we can obtain good removing characteristics of various microbes by adjusting the charging voltage, the pulse repetition rate and the electrical field inducing time.

• 전기의세계
• /
• v.24 no.5
• /
• pp.32-37
• /
• 1975

The use of a Microprocessor and PROM memories in an Electronic Loop Switching System has been described. The use provides telephone service for up to 128 subscriber lines using 32 trunks with increased reliability, maintenance capabilities, and flexibility. Date Communication between the central office terminal and the remote terminal is by FSK at 1-KHz rates over an idle trunk. Software functions and traffic handling capabilities are also described.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.520-528
• /
• 2000

he speed of microprocessor getting faster, the data transfer width between the microprocessor and the memory becomes a critical part to limit the system performance. So the study of the computer architecture with the high code density is cmerged. In this paper, a tentative Bi-Length Instruction Set Computer(BISC) that consists of 16 bit and 32 bit length instructions is proposed as the high code density 32 bit microprocessor architecture. The 32 bit BISC has 16 general purpose registers and two kinds of instructions due to the length of offset and the size of immediate operand. The proposed 32 bit BISC is implemented by FPGA, and all of its functions are tested and verified at 1.8432MHz. And the cross assembler, the cross C/C++ compiler and the instruction simulator of the 32 bit BISC are designed and verified. This paper also proves that the code density of 32 bit BISC is much higher than the one of traditional architecture, it accounts for 130~220% of RISC and 130~140% of CISC. As a consequence, the BISC is suitable for the next generation computer architecture because it needs less data transfer width. And its small memory requirement offers that it could be useful for the embedded microprocessor.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.493-497
• /
• 2000

A battery is the device that transforms the chemical energy into the direct-current electrical energy without a mechanical process. Unit cells are connected in series to obtain the required voltage while being connected in parallel to organize capacity for load current. Because the voltage drop down in one set of battery is faster than in two one it may result in the low efficiency of power converter with the voltage drop and cause the system shutdown. However when the system being shutdown. However when the system being driven in parallel a circular-current can be generated,. It is shown that as a result the new batteries are heated by over-charge and over-discharge and the over charge current increases rust of the positive grid and consequently shortens the lifetime of the new batteries. The difference between the new batteries and old ones is the amount of internal resistance. In this paper we can detect the unbalance current using the microprocessor and achieve the balance current by adjusting resistance of each set, The internal resistance of each set becomes constant and the current of charge and discharge comes to be balanced by inserting the external resistance into the system and calculating the change of internal resistance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.442-446
• /
• 2015

As electricity consumption is increasing rapidly these days, an urgent. need exists to minimize consumption through smart and intelligent ways in order to prevent a future energy crisis. For this purpose, development of an intelligent peak power management system should be required. As the number of appliances and consumer electrical devices increase, power consumption in unit business tends to grow. Generally, electricity consumption can be minimized using a peak power management system capable of. effectively controlling the load power by continuously monitoring the power. In this work, a peak power management system which consists of arduino microprocessor equipped with ethernet and Zigbee shield is presented. To verify the feasibility of the proposed scheme, laboratory-scale experiments are carried out.

• Journal of Welding and Joining
• /
• v.8 no.3
• /
• pp.60-69
• /
• 1990

Plasma arc cutting is a fusion cutting process in which a gas-constricted arc is employed to produce a high-temperature, high-velocity plasma jet on the workpiece. This process provides some advantages such as increased cutting velocity, excellent working accuracy and the ability to cut special materials (widely used stainless steels and Al-alloys, for example), when compared with iconventional oxyfuel gas cutting. From the view point of price and reliability of the power source, plasma arc cutting has also some distinct advantages over laser beam cutting. High-speed machines with NC or CNC systems are needed for the plasma arc or laser beam cutting process, while for oxyfuel gas cutting, low-speed machines with copying templates or optical-shape tracking sensors can be applied. The low price and high flexibility of the microprocessor arc contributing more and more the application of CNC system in the plasma arc cutting process, as in other manufacturing fields. From these points of view, a microprocessor-based plasma arc cutting system was developed by using a reference-pulse system, and its performance was tested. The interpolating routines were programmed in the assembly language for saving the memory volume and improving the compouting speed, which has an intimate relationship with the available cutting velocity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1363-1368
• /
• 2007

In order to utilize renewal energy such as solar power and wind power, high performance battery charge-discharge controller is essentially needed. In this paper, a PIC microprocessor-based battery charge-discharge controller for solar power system is designed and implemented. The PIC16C711 microprocessor and CCS-C compiler are used to realize stable and accurate operation of the battery controller. The proposed controller is designed to utilize the charged battery power during daytime to provide convenience to user. Current control function is included in proposed controller to cope with various type of new material energy system coming in the near future.

• Journal of Biomedical Engineering Research
• /
• v.10 no.3
• /
• pp.361-364
• /
• 1989

A PC-based motor nerve conduction velocity measuring system was designed and constructed. The system was composed with an EMG preamplifier, a stimulator, an Apple II plus microcomputer and an 8 bit AD converter. The system was primariliy intended to screen motor nerve difficulties of industrial workers. This system can acquire, store and display the waveforms of evoked potentials. The PC-based system is expected to increase the versatility and applicability as well as to reduce the system cost.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.417-419
• /
• 2007

In this paper we have designed a monitoring and controlling system, which rainwater harvests. Atmega 128 microprocessor family is used for the monitoring and controlling of the system. Through the Internet, the rainwater bank system can be monitored and controlled by using JAVA program. Monitoring and controlling of the system are also possible without Internet connection.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.769-772
• /
• 2003

In this paper are described design of hardware and GUI(Graphical User Interface) for a PC based Weighting System. Conventional Weighting System is adapted microprocessor system for measuring and controlling. This system should have big memory for the management of measured data and is difficult to operate. For such reason a new Weighting System based on PC is proposed. In this contribution is handled these problems.