• Journal of Advanced Marine Engineering and Technology
• /
• 제11권2호
• /
• pp.37-50
• /
• 1987

In an effort to conserve electric power, variable voltage variable frequency pulse width modulated (PWM) inverters are being applied increasingly to the variable speed control of the induction motors. The use of the PWM technique in motor drive applications is considered advantageous in many ways. For industrial applications, the PWM drive obtains its DC input through simple uncontrolled rectification of the commercial AC line and is favored for its good power factor, good efficiency, its relative freedom regulation problem, and mainly for its ability to operate the motor with nearly sinusoidal current waveforms. The purpose of this paper is to design a three phase natural sampled PWM inverter using microprocessor with simple control algorithm and hybrid control circuit has been built to implement this PWM scheme. In this system, the microprocessor can be used only for calculations directly related to motor control tasks by the design of hybrid circuit which sends PWM signals to the motor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.45-48
• /
• 2000

By the use of he DSP and microprocessor controller many high power converter such as especially inverter and motor drive system may be enhanced resulting in the improved robustness of EMI the ability to communicate the operating conditions and the ease of adjusting the control parameters. However the digital controller using DSP or microprocessor has not been applied in the high frequency switching power supplies especially in full bridge dc/dc converters. this paper presents a promising solution to the dc bias control problem of high frequency transformer in high power full bridge converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.25-28
• /
• 1989

This paper is to study a modified hysteresis band current control technique for keeping the fixed switching frequency. The control technique is applied to an brushless DC motor(BLDCM). This paper gives an analysis of the modified hysteresis band with isolated neutral case and the PI controller with current limiter in forward loop; their characteristics are studied by simulation. The proposed control technique is implemented by using a microprocessor-based system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.349-352
• /
• 2001

As microprocessor and SOC (System On a Chip) performance moves into the GHz speed, the high-speed asynchronous design is becoming challenge due to the disadvantageous power and speed aspects in synchronous designs. The next generation on-chip systems will consist of multiple independently synchronous modules and asynchronous modules for higher performance, so the interface module for data transfer between multiple clocked IPs is designed with Xilinx FPGA and simulated with RISC microprocessor.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.259-262
• /
• 2003

In this paper, we designed and implemented digital wireless audio system with embedded RTOS using Bluetooth. Transmitter is consisted of a Settopbox, FIFO for interface block, Microprocessor(ARM7TDMI), UART driver and Bluetooth module. Receiver is consisted of a Microprocessor, AC-3 decoder, Bluetooth module and a Speaker with Amp. We programed Bluetooth protocal stack of HCI, L2CAP, and RFCOMM, so that Bluetooth module interacts with CPU.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.180-185
• /
• 1995

In this paper, we designed the speed controller with high accuracy and speedy steady-state response, in Induction motor control system, Fuzzy P-1 controller of Induction motor using Microprocessor have an appropriate fuzzy rule matrix (which is 2-separate Look-up Table) The usefulness of proposed fuzzy P-1 controller will be confirmed by experiments which we compare with conventional P-1 controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.886-889
• /
• 2003

In this paper a design of educational robot based on a PC and/or a microprocessor is discussed. The educational robot has 5 DOF and Is made with Swiss Mini Servomotor and Motor Controller IC LM629N. Also, a GUI(Graphical User Interface) is programmed by Visual Basic. This system is completed to consider control properties of the educational robot with 5-DOF that can be changed the parameter of controller by software.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.106-111
• /
• 2007

In this study, we designed a digital fuzzy logic controller based on FPGA and microprocessor for MPPT of the sofar power generation system. A fuzzy algorithm to control the power tracking function of a boost converter has been built into the FPGA, and applied to the small scaled solar power generation system. The embodied controller showed a stable operation characteristic with the small output voltage ripple for the intensity change of solar radiation. This result proves that the implementation of the power tracking controller using FPGA is an effective way compared to the existing one using microprocessor.

• 전기학회논문지P
• /
• 제54권4호
• /
• pp.203-210
• /
• 2005

In this paper, a multi-functional control module is developed to improve the confidence of $CO_2$ welding. In the developed system, a main controller of an automatic welding system including I/O port is modulated by microprocessor. The developed multi-functional control module is familiarized to the conventional automatic welding system. Therefore, the confidence of $CO_2$ welding is improved when the main controller of an automatic welding system is broken down.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.100-102
• /
• 2001

This paper resents digital controller of emergency power generator system. The controller offers an integrated alternative for Genset control, metering and remote monitoring. Proposed controller used 80c196kc one chip microprocessor for digital control, it measures parameters of generator and provides output signals to control starting and stopping of generator. Additionally protection and alarm functions are considered to system stability. As almost parts of controller are embedded by digital microprocessor and FPGA techniques, the controller has a more flexible feature and an improvement of precision. The developed system has a big merit economically and is suitable for any kW size generator.