• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권1호
• /
• pp.34-45
• /
• 2014

산업화의 영향으로 발생한 토양 지하수 내 중금속 및 유류 오염정화를 위해 다양한 시도가 이루어지고 있다. 그러나 미세토양이 상대적으로 많이 포함되어 있는 오염토양 정화시 오염물질의 rebound나 tailing 현상이 발생되어 정화기간이 장기화 되어왔다. 이러한 문제점은 미세토양과 미세공극이 존재하는 미세환경과 오염물질의 각각의 특성, 존재형태, 그리고 상호간의 다양한 반응 등으로부터 기인한다고 보고되었다. 따라서, 본 연구에서는 토양 지하수 미세환경과 오염정화 효율성과의 상관성에 대해 고찰하고 미세환경의 샘플링, 분석, 평가 기법을 소개 및 제안하며, 이를 활용한 오염정화효율 향상과 최적의 정화공법선정을 위한 정보를 제공하고자 하였다. 오염토양의 물리 화학 생물학적 특성 그리고 오염물질 종류 및 특성에 따른 정밀 평가를 통해 특정 정화공법 적용시 달성 가능한 정화기간과 정화수준을 예상할 수 있을 것이다. 따라서, 미세환경의 정밀 분석, 평가 기술을 바탕으로 정화 기술의 효율성과 타당성 검토가 가능할 것으로 판단되며 오염된 토양 지하수 복원을 위한 최적의 정화공법을 선정하는 기초자료로써 활용될 수 있을 것으로 사료된다.

• 한국통신학회논문지
• /
• 제28권6A호
• /
• pp.351-360
• /
• 2003

무선 이동 네트워크 환경에서 양질의 멀티미디어 서비스를 제공하기 위해서는 트래픽에 대한 QoS가 보장되어야 한다. 그러나 기존의 자원 예약 기법은 유선 네트워크를 위해 설계된 것이므로 무선 이동 네트워크에서의 QoS보장 문제를 상당부분 해결하지 못하고 있다. 또한 최근에는 마이크로 셀들로 구성된 네트워크가 증가함에 따라 빈번한 핸드오프로 인한 전송지연 문제와 MN(Mobile Node)의 위치 이동을 신속하게 제어해야 하는 문제 등이 발생하고 있다. RSVP와 Mobile IP간의 상호 운용을 지원하는 기존 기법들은 매크로 셀 환경을 위해 고안되었으므로 마이크로 셀 환경에서 그대로 사용될 경우 한계점을 갖고 있다. 본 논문에서는 마이크로 셀룰러 네트워크에서 QoS를 보장하기 위해 CRSVP(Cellular RSVP Protocol)를 제안한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.189-194
• /
• 2004

As a disk drive becomes widely used in portable environments, one of the important requirements is durability under severe environmental condition, especially, resistance to mechanical shock. An important challenge in the disk recording is to improve disk drive robustness in shock environments. If the system comes In contact with outer shock disturbance, the system gets critical damage in head-gimbal assembly or disk. This paper describes analysis of a HGA(head-gimbal assembly) in micro MO drives to shock loading during both non-operating state and operating state. A finite element model which consists of the disk, suspension, slider and air bearing was used to find structural response of micro MO drives. In the operational case. the air bearing is approximated with four linear elastic springs. The commercially available finite element solver, ANSYS/LS-DYNA, is used to simulate the shock response of the HGA in micro MO drives. In this paper, the mechanical robustness of the suspension is simuiated considering the shock responses of the HGA.

• 한국지역사회생활과학회지
• /
• 제19권4호
• /
• pp.697-706
• /
• 2008

Generally, tourism environments are classified as macro or micro environments. Hotel revenues are influenced directly and indirectly by macro and micro environments. This study aims to examine the determinants of the change in macro-environments on hotel revenue. The explanatory variables in this research were wage, exchange rates (ER), consumer price index (CPI) and seasonality. The results of this study were as follows; The CPI and ER significantly affected the hotel food and beverage sales. The seasonality (summer and autumn) and wage significantly affected the hotel room sales. Wage and seasonality (summer and autumn) also significantly affected the total sale on the hotels.

• 센서학회지
• /
• 제19권3호
• /
• pp.197-201
• /
• 2010

This paper describes the fabrication and characteristics of a NO sensor using ZnO thin film integrated 3C-SiC micro heater based on polycrystalline 3C-SiC thin film of operation in harsh environments. The sensitivity, response time, and operating properties in high temperature and voltages of NO sensors based SiC MEMS are measured and analyzed. The sensitivity of device with pure ZnO thin film at the heater operating power of 13.5 mW ($300^{\circ}C$) is 0.875 in NO gas concentration of 0.046 ppm. In the case of Pt doping, the sensitivity of at power consumption of 5.9 mW ($250^{\circ}C$) was 1.92 at same gas flow rate. The ZnO with doped Pt was showed higher sensitivity, lower working temperature and faster adsorption characteristics to NO gas than pure ZnO thin film. The NO gas sensor integrated SiC micro heater is more strength than others in high voltage and temperature environments.

• 정보처리학회논문지C
• /
• 제15C권1호
• /
• pp.51-60
• /
• 2008

모바일 노드의 움직임으로 인한 컨트롤 메시지의 오버헤드를 감소시키기 위해 마이크로 모빌리티 프로토콜이 만들어졌다. 모바일 장비의 보급으로 모바일 노드를 이용한 서비스는 계속 증가하고 있으며 인터넷에서 멀티미디어 서비스를 하기 위하여 멀티캐스트 서비스가 많이 사용된다. 이 논문에서는 마이크로 모빌리티 환경에 적절한 새로운 멀티캐스트 프로토콜을 제안하였다. 이 프로토콜은 모바일 노드가 움직여 잦은 핸드오프가 발생하는 경우에도 최적의 라우팅 경로를 유지하면서도 지속적인 멀티캐스트 서비스를 할 수 있도록 설계하였다. 이 프로토콜의 성능을 측정하기 위하여 시뮬레이션을 이용하여, 기존의 모바일 IP 멀티캐스트 방법인, Remote subscription, Bi-directional tunneling, 그리고 MMA와 비교 실험하였고, 전송 성공율, 네트워크에 미치는 부하 등 여러 가지 면에서 가장 좋은 결과를 얻었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.32-37
• /
• 2002

High speed machining is one of most effective technologies to improve productivity. It can give great advantage for manufacture of die and Moulds. However, when the high speed machining of materials, especially in machining of micro groove, a severely thermal demage was generated on workpiece and tool. Generally, the cutting fluid is used to improve penetration, lubrication, and cooling effect. In order to rise the performance of lubrication, it contains extreme pressure agents (Cl, S, P). But the environment of work room go bad by those additive Therefore, the compressed chilly air with Oil mist system was developed to replace the conventional cutting fluid system. This paper carried out the tests to evaluate the machinability by the cutting environment in high speed micro groove machining of NAK80 (HRC40). Compressed chilly air with oil mist was ejected on the contact area between cutting edge and workpiece. The effectiveness of this developed compressed chilly air with oil mist system was evaluated in terms of tool life. The results showed that the tool life of carbide tool coated TiAIN with compressed chilly air mist cooling was much longer than with dry and flood coolant when cutting the material.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.405-408
• /
• 2008

From the previous researches about flow characteristic of micro-nozzle, we found that viscosity and back pressure induced heavy losses in micro nozzle. To overcome thess losses, we began to study new conceptual micro propulsion system that is thermal transpiration based micro propulsion system. It has no moving parts and can pump the gaseous propellant by temperature gradient only (cold to hot). Most of previous research on thermal transpiration is in its early stage and mainly studied for application to small vacuum facility or gas chromatography in ambient condition using nanoporous material like aerogel. In this study, we focus on basic research of propulsion system based on thermal transpiration using polyimide material in vacuum conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1194-1197
• /
• 2005

Micro nozzle is employed as a dynamic passive valve in micro fluidic devices. Micro nozzle array is used in micro droplet generation in bio-medical applications and propulsion device for actuating satellite and aerospace ship in vacuum environments. Aperture angle and the channel length of the micro nozzle affect its retification efficiency, and thus it is needed to produce micro nozzle precisely. MEMS process has a limit on making a micro nozzle with high-aspect ratio. Reactive ion etching process can make high-aspect ratio structure, but it is difficult to make the complex shape. Focused ion beam deposition has advantage in machining of three-dimensional complex structures of sub-micron size. Moreover, it is possible to monitor machining process and to correct defected part at simultaneously. In this study, focused ion beam deposition was applied to micro nozzle production.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.113-113
• /
• 2009

This paper describes the characteristics of a poly 3C-SiC micro heater which was fabricated on $AlN(0.1{\mu}m)/3C-SiC(1.0{\mu}m)$ suspended membranes by surface micro- machining technology. The 3C-SiC and AlN thin films which have wide energy bandgap and very low lattice mismatch were used sensors for high temperature and voltage environments. The 3C-SiC thin film was used as micro heaters and temperature sensor materials simultaneously. The implemented 3C-SiC RTD (resistance of temperature detector) and the power consumption of micro heaters were measured and calculated. The TCR (thermal coefficient of the resistance) of 3C-SiC RTD is about -5200 $ppm/^{\circ}C$ within a temperature range from $25^{\circ}C$ to $50^{\circ}C$ and -1040 $ppm/^{\circ}C$ at $500^{\circ}C$. The micro heater generates the heat about $500^{\circ}C$ at 10.3 mW. Moreover, durability of 3C-SiC micro heaters in high voltages is better than pt micro heaters. A thermal distribution measured and simulated by IR thermovision and COMSOL is uniform on the membrane surface.