• Journal of Soil and Groundwater Environment
• /
• v.19 no.1
• /
• pp.34-45
• /
• 2014

A variety of physical, chemical, and microbiological techniques have been developed to deal with soil and groundwater contamination. However, in the presence of the large portion of soil micro-environments, contaminant rebound and/or tailing have been frequently reported. Case study of total petroleum hydrocarbons (TPH) removal by full-scale land farming showed that contaminant rebound and/or tailing occurred in 9 out of total 21 cases and subsequently resulted in problems of a long term operation to satisfy TPH guidelines of contaminated soil and groundwater. The main cause of contaminant rebound and tailing is considered to be the strong interactions between contaminants and micro-environments including micro-particles, micro-pores, and organic matter. Thus, this study reviewed the effects of soil micro-environments of soil and groundwater on the removal efficiency for both heavy metals and petroleum contaminants. In addition, the various methods of sampling, analysis, and assessment of soil micro-environments were evaluated. Thorough understanding of the effects of soil micro-environments on contaminant removal will be essential to achieve a cost-effective and efficient solution to contaminated sites.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.351-360
• /
• 2003

To provide good-quality services of multimedia in wireless mobile networks, QoS for multimedia traffic should be guaranteed. However, since the existing QoS guaranteed schemes are designed for fixed networks, they are inadequate in the wireless network environments. Recently, as the size of cells like micro cell or pico cell becomes smaller. Mobile hosts on micro cellular networks, change their location frequently. It causes many drawbacks such as delayed delivery, packet losses and signaling overheads. Because the existing schemes supporting interoperability between RSVP and Mobile If are designed for macro cell environments. Their uses in micro cellular networks can be restricted. In this paper, we propose the CRSVP(Cellular RSVP Protocol) which supports QoS in micro cellular network environments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.189-194
• /
• 2004

As a disk drive becomes widely used in portable environments, one of the important requirements is durability under severe environmental condition, especially, resistance to mechanical shock. An important challenge in the disk recording is to improve disk drive robustness in shock environments. If the system comes In contact with outer shock disturbance, the system gets critical damage in head-gimbal assembly or disk. This paper describes analysis of a HGA(head-gimbal assembly) in micro MO drives to shock loading during both non-operating state and operating state. A finite element model which consists of the disk, suspension, slider and air bearing was used to find structural response of micro MO drives. In the operational case. the air bearing is approximated with four linear elastic springs. The commercially available finite element solver, ANSYS/LS-DYNA, is used to simulate the shock response of the HGA in micro MO drives. In this paper, the mechanical robustness of the suspension is simuiated considering the shock responses of the HGA.

• The Korean Journal of Community Living Science
• /
• v.19 no.4
• /
• pp.697-706
• /
• 2008

Generally, tourism environments are classified as macro or micro environments. Hotel revenues are influenced directly and indirectly by macro and micro environments. This study aims to examine the determinants of the change in macro-environments on hotel revenue. The explanatory variables in this research were wage, exchange rates (ER), consumer price index (CPI) and seasonality. The results of this study were as follows; The CPI and ER significantly affected the hotel food and beverage sales. The seasonality (summer and autumn) and wage significantly affected the hotel room sales. Wage and seasonality (summer and autumn) also significantly affected the total sale on the hotels.

• Journal of Sensor Science and Technology
• /
• v.19 no.3
• /
• pp.197-201
• /
• 2010

This paper describes the fabrication and characteristics of a NO sensor using ZnO thin film integrated 3C-SiC micro heater based on polycrystalline 3C-SiC thin film of operation in harsh environments. The sensitivity, response time, and operating properties in high temperature and voltages of NO sensors based SiC MEMS are measured and analyzed. The sensitivity of device with pure ZnO thin film at the heater operating power of 13.5 mW ($300^{\circ}C$) is 0.875 in NO gas concentration of 0.046 ppm. In the case of Pt doping, the sensitivity of at power consumption of 5.9 mW ($250^{\circ}C$) was 1.92 at same gas flow rate. The ZnO with doped Pt was showed higher sensitivity, lower working temperature and faster adsorption characteristics to NO gas than pure ZnO thin film. The NO gas sensor integrated SiC micro heater is more strength than others in high voltage and temperature environments.

• The KIPS Transactions:PartC
• /
• v.15C no.1
• /
• pp.51-60
• /
• 2008

Micro-mobility protocols have been developed to reduce the control message overhead due to movements of mobile nodes. With the spread of mobile devices, services using mobile nodes are increasing and multicast services are becoming more important in providing multimedia services. In this paper we propose a new multicast protocol suitable for micro-mobility environments. The proposed protocol is designed to maintain optimal multicast routing paths and continue to provide multicast services without disruption in spite of frequent handoffs due to movements of mobile nodes. We used simulation to evaluate the proposed protocol, compared its performance with existing multicast protocols for mobile environments including bi-directional tunneling, remote subscription, and MMA, and observed that the proposed protocol exhibited better performance in terms of transmission success ratio and overhead on the network.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.32-37
• /
• 2002

High speed machining is one of most effective technologies to improve productivity. It can give great advantage for manufacture of die and Moulds. However, when the high speed machining of materials, especially in machining of micro groove, a severely thermal demage was generated on workpiece and tool. Generally, the cutting fluid is used to improve penetration, lubrication, and cooling effect. In order to rise the performance of lubrication, it contains extreme pressure agents (Cl, S, P). But the environment of work room go bad by those additive Therefore, the compressed chilly air with Oil mist system was developed to replace the conventional cutting fluid system. This paper carried out the tests to evaluate the machinability by the cutting environment in high speed micro groove machining of NAK80 (HRC40). Compressed chilly air with oil mist was ejected on the contact area between cutting edge and workpiece. The effectiveness of this developed compressed chilly air with oil mist system was evaluated in terms of tool life. The results showed that the tool life of carbide tool coated TiAIN with compressed chilly air mist cooling was much longer than with dry and flood coolant when cutting the material.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.405-408
• /
• 2008

From the previous researches about flow characteristic of micro-nozzle, we found that viscosity and back pressure induced heavy losses in micro nozzle. To overcome thess losses, we began to study new conceptual micro propulsion system that is thermal transpiration based micro propulsion system. It has no moving parts and can pump the gaseous propellant by temperature gradient only (cold to hot). Most of previous research on thermal transpiration is in its early stage and mainly studied for application to small vacuum facility or gas chromatography in ambient condition using nanoporous material like aerogel. In this study, we focus on basic research of propulsion system based on thermal transpiration using polyimide material in vacuum conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1194-1197
• /
• 2005

Micro nozzle is employed as a dynamic passive valve in micro fluidic devices. Micro nozzle array is used in micro droplet generation in bio-medical applications and propulsion device for actuating satellite and aerospace ship in vacuum environments. Aperture angle and the channel length of the micro nozzle affect its retification efficiency, and thus it is needed to produce micro nozzle precisely. MEMS process has a limit on making a micro nozzle with high-aspect ratio. Reactive ion etching process can make high-aspect ratio structure, but it is difficult to make the complex shape. Focused ion beam deposition has advantage in machining of three-dimensional complex structures of sub-micron size. Moreover, it is possible to monitor machining process and to correct defected part at simultaneously. In this study, focused ion beam deposition was applied to micro nozzle production.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.113-113
• /
• 2009

This paper describes the characteristics of a poly 3C-SiC micro heater which was fabricated on $AlN(0.1{\mu}m)/3C-SiC(1.0{\mu}m)$ suspended membranes by surface micro- machining technology. The 3C-SiC and AlN thin films which have wide energy bandgap and very low lattice mismatch were used sensors for high temperature and voltage environments. The 3C-SiC thin film was used as micro heaters and temperature sensor materials simultaneously. The implemented 3C-SiC RTD (resistance of temperature detector) and the power consumption of micro heaters were measured and calculated. The TCR (thermal coefficient of the resistance) of 3C-SiC RTD is about -5200 $ppm/^{\circ}C$ within a temperature range from $25^{\circ}C$ to $50^{\circ}C$ and -1040 $ppm/^{\circ}C$ at $500^{\circ}C$. The micro heater generates the heat about $500^{\circ}C$ at 10.3 mW. Moreover, durability of 3C-SiC micro heaters in high voltages is better than pt micro heaters. A thermal distribution measured and simulated by IR thermovision and COMSOL is uniform on the membrane surface.