• 펄프종이기술
• /
• 제40권1호
• /
• pp.9-14
• /
• 2008

Beating and using chemical agents are common methods to improve physical properties. But the beating is high energy consumption process and chemical agent addition may cause deteriorate waste water quality. Therefore, it is necessary to use more environment-friendly methods. In this study, micro pulp was used in the handsheet making to get improving effects of physical properties without beating treatment and chemicals. Stiffness, thickness and air permeability were increased and strength properties of paper were also improved to some extents by only the micro pulp addition.

• 한국태양에너지학회 논문집
• /
• 제23권1호
• /
• pp.48-56
• /
• 2003

Three of the leading computer daylighting simulation programs are compared with physical modeling techniques as a means of predicting daylighting performance of interior spaces. Lumen-Micro, Adeline and Lightscape are compared with physical model experiments under clear sky conditions. The comparative evaluations are conducted on analysis of daylight illuminance ratio(%) depending on model types. The estimated average errors are analyzed on 9.4% in Lumen-Micro, 6.3% in Adeline and 3.4% in Lightscape. Therefore, it is proved that three programs are useful for evaluating daylighting performance in our clear sky condition.

• Geomechanics and Engineering
• /
• 제19권3호
• /
• pp.229-240
• /
• 2019

The physical models are useful to understand the soil behaviour. Hence, these tools allow validating analytical theories and numerical data. This paper addresses the design, construction and implementation of a physical model able to simulate the soil liquefaction under different cyclic actions. The model was instrumented with a piezoelectric actuator and a set of transducers to measure the porewater pressures, displacements and accelerations of the system. The soil liquefaction was assessed in three different grain size particles of a natural sand by applying a sinusoidal signal, which incorporated three amplitudes and the fundamental frequencies of three different earthquakes occurred in Colombia. In addition, such frequencies were scaled in a micro shaking table device for 1, 50 and 80 g. Tests allowed identifying the liquefaction susceptibility at various frequency and displacement amplitude combinations. Experimental evidence validated that the liquefaction susceptibility is higher in the fine-grained sands than coarse-grained sands, and showed that the acceleration of the actuator controls the phenomena trigging in the model instead of the displacement amplitude.

• Safety and Health at Work
• /
• 제15권3호
• /
• pp.284-291
• /
• 2024

Background: This study aimed to identify the prevalence of workplace hazards and organizational protection resources according to the size of the enterprise in the manufacturing industry of the Republic of Korea. Methods: We analyzed data of waged workers (weighted N = 5,879) from the Fifth Korean Working Conditions Survey (2017). Enterprise sizes were categorized as "micro enterprises" (less than five employees), "small enterprises" (5-49 employees) and "medium-large enterprises" (50 or more employees). Self-reported exposure to 18 physical, chemical, ergonomic, and psychological hazards were measured. The presence of organizational protection resources such as a labor union, a safety delegate working at the company, designated spaces to deal with safety, and the provision of health and safety information was evaluated. Results: Compared to workers in medium-large enterprises, those in micro enterprises showed a higher proportion of exposure to most of physical, chemical, ergonomic, and psychological hazards, except for exposure to solvents, prolonged sitting, and experiencing a state of emotional unrest. On the other hand, workers in micro enterprises had the lowest proportion of access to organizational protection resources. Conclusion: Our study demonstrates that manufacturing workers at the micro enterprise in the Republic of Korea are exposed to the most hazardous work environment and yet have access to the fewest organizational protection resources.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.231-235
• /
• 2002

A theoretical and experimental study on the combustion process in a constant volume micro combustor is described. Unlike in a macro scale constant volume combustor, the heat loss to the wall plays a major role in flame propagation in a micro micro combustor. In order to analyze the effect of heat loss on combustion phenomena, pressure transition from ignition was measured. A number of cylindrical micro combustors with different diameter and depth were used for experiment to study the effect of length scales and shape factor. The diameter of combustor ranged from 7.5mm to 22.5 mm and the height of cylinder was from 1mm to 4mm. Initial pressure was also varied for the experiment. The diagnostic methods were severely limited due to the size of the apparatus and uncertainties of certain quantities to be measured in a small-scale environment. An analytical method to derive physical quantities that are essential for performance prediction from the pressure measurements is described.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1401-1403
• /
• 2008

Considering that human body is continuously experiencing mechanical stimuli due to daily activities, the micro-physical environments of cells/tissues should be considered for the successful outcomes in tissue engineering and/or related researches. Obviously, there are many factors involved in cell-based researches. In this presentation, the current trends and some of outcomes are introduced. Through this studies, the roles of mechanical engineering in relation to medical/biological researches are to be emphasized.

• 공업화학
• /
• 제31권3호
• /
• pp.237-257
• /
• 2020

The role of nano bio-composites precursor to chitosan are innumerable and are known for having different applications in various branches of physical sciences. The application to the sensor development is relatively new, where only few literature works are available to address the specific and critical analysis of nanocomposites in the subject area. The bio-composites are potential and having greater affinity towards the heavy metals and several micro-pollutants hence, perhaps are having wider implications in the low or even trace level detection of the pollutants. The nano-composites could show good selectivity and suitability for the detection of the pollutants as they are found in the complex matrix. However, the greater challenges are associated using the bio-composites, since the biomaterials are prone to be oxidized or reduced at an applied potential and found to be a hinderance for the detection of target pollutants. In addition, the materials could proceed with a series of electrochemical reactions, which could produce different by-products in analytical applications, resulting in several complex phenomena in electrochemical processes. Therefore, this review addresses critically various aspects of an evaluation of nano bio-composite materials in the electrochemical detection of heavy metals and micro-pollutants from aqueous solutions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1244-1247
• /
• 2005

The material removal mechanism of Electrical Discharge Machining (EDM) process has been studied for several decades. However, understanding of the material removal mechanism is still a difficult problem because the mechanism involves complicated physical phenomena including plasma. Especially, for a micro-EDM process, due to the influence of the debris that is generated during the machining process, quantitative modeling of EDM becomes more complex. To understand better the effects of the debris in the micro-EDM process experimentally, a new approach has been introduced in this study. Using a specially designed workpiece holder, the debris generated during the EDM with various process conditions has been collected. Then, using a simulated environment using micro-sized metal powders, the influence of the debris during the single EDM discharge has been observed. The effects of EDM process parameters on the debris size and product quality are discussed.

• 한국대기환경학회지
• /
• 제31권3호
• /
• pp.302-314
• /
• 2015

There is an adsorption method using activated carbon as a typical method for removing elemental mercury. Physical characteristics of activated carbon such as specific surface area and volume of pore (micro and meso) have positive effect for mercury adsorption. Activated carbon is carbon-based material with a high specific surface area. This activated carbon can be manufactured through carbonization and activation process. In this process, physical characteristics of specific surface area and pore distribution are changed by controlling operating parameters like temperature, time and reagent of activation. In this study, we evaluated characteristics of activated carbons manufactured from pinewood and coal with the operating parameters. We evaluated mercury adsorption capacities of the activated carbons having excellent physical characteristics and compared those to the commercial activated carbon.

• 생태와환경
• /
• 제36권4호통권105호
• /
• pp.403-412
• /
• 2003

전남 주암호에서의 식물플랑크톤 동태를 파악하기 위해 2003년 2월부터 10월까지 식물플랑크톤생체량 (클로로필 a)의 크기별 시 ${\cdot}$ 공간적 변동과 제반 환경요인에 대해 조사하였다. 본 논문에서는 주암호와 같은 담수호에서 식물플랑크톤의 크기 구조가 계절적, 공간적으로 어떻게 변화하고 그러한 변화 속에서 물리적 요인들이 어떤 영향을 미치는지 회귀분석을 통해 파악하고자 하였다. 식물플랑크톤 (클로로필 a)은 세 그룹 즉, 대형 (micro-size > 20 ${\mu}m$), 소형 (nano-size 3-20 ${\mu}m$) 마지막으로 초소형 (pico-size, < 3 ${\mu}m$)으로 구분했다. 물리적 특성 파악을 위해 수온, 광소멸계수, PAR (photosynthetically active radiation), 수중 탁도등도 동시에 측정하였다. 최대치의 클로로필 a 는 2003년 하류지역에서는 4월에 상류지역에서는 10월에 발생하였다. 식물플랑크톤의 대번성기에는 대부분 세포크기가 큰 대형 (micro-size)식물플랑크톤이 우세하였다. 주암호의 크기별 식물플랑크톤의 변동에 영향을 미칠 수 있는 물리적 특성들에 대해 논의하였다.