• 한국식품저장유통학회지
• /
• 제15권5호
• /
• pp.731-735
• /
• 2008

본 연구는 벌꿀의 내포되어 있을 수 있는 미생물의 포자의 제균에 관한 연구로 선행연구로 일반세균, 대장균군, 살모넬라균, 포도상구균을 분석하였으며, 벌꿀 음료 제조 후 유통 중에 문제시 되어지고 있는 내열호산성균의 제균에 관한 연구결과이다. 분석을 위한 내열호산성균 실험법은 진공감압기를 이용하여 $0.45\;{\mu}m$ micro filter를 이용한 막분리 배양법을 이용하였다. 미생물 실험 결과 일반세균, 대장균군, 살모넬라균, 포도상구균은 모두 음성으로 나타났으며, 내열호산성균 제균을 위하여 식품의 일반 살균법을 적용한 결과 농도별 전해수 살균, 오존수 살균, 자외선살균, 일반 마이크로 필터 처리, 고온 가열 살균, microwave 살균 등 모든 제균 방법에서 균이 제어 되지 않는 것으로나타났다. 또한 마이크로 필터를 이용한 제균 처리에서도 일반 (nominal type) 필터를 사용하였을 경우 $44.8{\sim}64.5%$ 제균 효과를 나타낸 반면 absolute type의 필터를 사용하였을 경우 0.45, $0.8\;{\mu}m$ 마이크로 필터의 사용 시 모든 처리구에서 음성으로 나타나 제균 효과가 다른 살균법에 비해우수한 것으로 나타났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.203-206
• /
• 2003

Thermo-optic tunable filter, with 4-pairs of H/L layers for DBR, was designed and fabricated. The transmittance characteristics of the filter were measured. Additionally, heating system and temperature sensor system were used in order to observe property of the filter by thermo-optic effect. The tuning efficiency of the filter was measured to be 0.144nm/K$^{-1}$ showing the tuning range of 9.4nm for the temperature variation of 64.7$^{\circ}C$. Filter, lens and fiber were aligned by micro-optical bench.

• 반도체디스플레이기술학회지
• /
• 제13권3호
• /
• pp.61-67
• /
• 2014

Micro-cracks in crystalline silicon wafer often result in wafer breakage in solar wafer manufacturing, and also their existence may lead to electrical failure in post fabrication inspection. Therefore, the reliable detection of micro-cracks is of importance in the photovoltaic industry. In this paper, an experimental method to select optimal parameters in anisotropic diffusion filter is proposed. It can reliably detect micro-cracks by the distinct extension of boundary as well as noise reduction in near-infrared image patterns of micro-cracks. Its performance is verified by experiments of several type cracks machined.

• 정보저장시스템학회논문집
• /
• 제6권1호
• /
• pp.25-30
• /
• 2010

In this paper, we investigate the confocal filter for high quality reading signal of micro holographic data storage system. The confocal filter is used to remove crosstalk effects of adjacent recording-layer by multi-layer multiplexing method. To remove a noise of reading signal, we consider size and geometrical structure of filter. From the obtained results, we present optical characteristics including Fresnel and Fraunhofer diffraction effects. Finally, we propose the optimal confocal filter for good image quality and increased reflection power.

• 한국전기전자재료학회논문지
• /
• 제14권7호
• /
• pp.557-561
• /
• 2001

Chemical mechanical polishing (CMP) process has been widely used to planarize dielectric layers, which can be applied to the integraded circuits for sub-micron technology. Despite the increased use of CMP process, it is difficult to accomplish the global planarization of in the defect-free inter-level dielectrics (ILD). Especially, defects such as micro-scratch lead to severe circuit failure which affect yield. CMP slurries can contain particles exceeding 1㎛ in size, which could cause micro-scratch on the wafer surface. The large particles in these slurries may be caused by particles agglomeration in slurry supply line. To reduce these defects, slurry filtration method has been recommended in oxide CMP. In this work, we have studied the effects of filtration and the defect trend as a function of polished wafer count using various filters in inter-metal dielectrics(IMD)-CMP process. The filter installation in CMP polisher could reduce defects after IMD-CMP process. As a result of micro-scratch formation, it is shown that slurry filter plays an important role in determining consumable pad lifetime. The filter lifetime is dominated by the defects. We have concluded that slurry filter lifetime is fixed by the degree of generating defects.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.32-38
• /
• 2010

Hybrid material(ceramic+metal) processes were developed for micro filter using ceramics coating at metal filter surface by thermal spray method, micro hole drilling at ceramic coated filter surface by femtosecond laser, and fiber laser direct welding of ceramic and metal (SUS304, SM45C) by capillary effect. Thermal spray process was used for ceramic powders and metal filters. The used ceramic powders were $Al_2O_3+40TiO_2$(Metco 131VF) powder of maximum particle size $5{\mu}m$ and ${Al_2O_3}99+$(Metco 54NS) power of maximum particle size 45m. Ceramic coated filters using thermal spray method had a great influence on powder material, particle size and coating thickness but had a fine performance as a micro filter. CW fiber laser was used to drill the top ceramic layer and melt the bottom metal layer for joining applications.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.282-283
• /
• 2001

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.281-287
• /
• 2008

An acousto-optic tunable filter based 3-D micro surface profile measurement using an equally spaced 5 spectral phase shifting is described. The 5-bucket spectral phase shifting method is compared with a Fourier-transform method in the spectral domain. It can provide a fast measurement capability while maintaining high accuracy since it needs only 5 pieces of spectrally phase shifted imaging data and a simple calculation in comparison with the Fourier transform method that requires full wavelength scanning data and relatively complicated computation. The 3-D profile data of micro objects can be obtained in a few seconds with an accuracy of ${\sim}10nm$. The 3-D profile method also has an inherent benefit in terms of being speckle-free in measuring diffuse micro objects by employing an incoherent light source. Those simplicity and practical applicability is expected to have diverse applications in 3-D micro profilometry such as semiconductors and micro-biology.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.626-637
• /
• 2014

On ship, especially on large ship, the flexure deformation between Master (M)/Slave (S) Inertial Navigation System (INS) is a key factor which determines the accuracy of the integrated system of M/S INS. In engineering this flexure deformation will be increased with the added ship size. In the M/S INS integrated system, the attitude error between MINS and SINS cannot really reflect the misalignment angle change of SINS due to the flexure deformation. At the same time, the flexure deformation will bring the change of the lever arm size, which further induces the uncertainty of lever arm velocity, resulting in the velocity matching error. To solve this problem, a $H_{\infty}$ algorithm is proposed, in which the attitude and velocity matching error caused by deformation is considered as measurement noise with limited energy, and measurement noise will be restrained by the robustness of $H_{\infty}$ filter. Based on the classical "attitude plus velocity" matching method, the progress of M/S INS information fusion is simulated and compared by using three kinds of schemes, which are known and unknown flexure deformation with standard Kalman filter, and unknown flexure deformation with $H_{\infty}$ filter, respectively. Simulation results indicate that $H_{\infty}$ filter can effectively improve the accuracy of information fusion when flexure deformation is unknown but non-ignorable.

• 한국전기전자재료학회논문지
• /
• 제14권9호
• /
• pp.707-713
• /
• 2001

As the integrated circuit device shrinks to smaller dimensions, chemical mechanical polishing (CMP) process was requirdfo the global planarization of inter-metal dielectric (IMD) layer with free-defect. However, as the IMD layer gest thinner, micro-scratches are becoming as major defects. However, as the IMD layer gets thinner, micro-scratches are becoming as major defects. Micro-scratches are generated by agglomerated slurry, solidified and attached slurry in pipe line of slurry supply system. To prevent agglomerated slurry particle from inflow, we installed 0.5${\mu}{\textrm}{m}$ point of use (POU) filter, which is depth-type filter and has 80% filtering efficiency for the 1.0${\mu}{\textrm}{m}$ size particle. In this paper, we studied the relationship between defect generation and polished wafer counts to understand the exact efficiency fo the slurry filteration, and to find out the appropriate pad usage. Our experimental results showed that it sis impossible to prevent defect-causing particles perfectly through the depth-type filter. Thus, we suggest that it is necessary to optimize the slurry flow rate, and to install the high spray bar of de-ionized water (DIW) with high pressure, to overcome the weak-point of depth type filter.