• Journal of KSNVE
• /
• v.9 no.6
• /
• pp.1227-1233
• /
• 1999

Modern technology depends on the reliability of extremely high technology equipments. In the production of semiconductor wafer, optical and electron microscopes, ion-beam, laser device must maintain their alignments within a nanometer. This equipment requires a vibration free environment to provide its proper function. Especially, lithography and inspection devices, which have sub-nanometer class high accuracy and resolution, have come to necessity for producing more improved giga and tera class semiconductor wafers. This high technology equipments require very strict environmental vibration standard, vibration criteria, in proportion to the accuracy of the manufacturing, inspecting devices. This paper deals with the structural dynamic design in high class semiconductor factory in order to be satisfied more strict vibration criteria for high sensitive equipment.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.6
• /
• pp.47-59
• /
• 2017

Korean Economy has been developed by the Korean Government's Support for the Large-sized Firms. This Government Policy causes the Polarization between Large-sized and Micro-sized Firms Aggravated. Micro-sized Firms are distributed over the Whole Industry Area, and can also cause the Economic Crisis If They are crashed down. Therefore Government Policy for the Micro-sized Manufacturing Industry is very Important Issue. This Paper Focused on the Analysis of Current Status for the Shoes Micro Manufacturing Industry. For the Effective Analysis, This Paper uses the Statistical Data Open to the Public and also conducts the Survey for the Micro-sized Firms in Busan. Statistical Program is used for Analyzing the Collected Data and the Major Findings are as Follows. First, Shoes Industry is led by the Micro and Small & Medium sized Firms rather than the Large-sized. And the Micro-sized Firms are getting the High Rate among the Whole Shoes Industry. Busan is heavily populated Area as the Origin of Shoes Industry. Second, even though Most of the Owner of the Micro-sized Firms have the High Technology Skill Level, Worker's Aging Phenomenon gets Worse and causes the Technology Handing down to the Next Generation Difficult. Third, Because the Factory Facility of the Micro-sized Firms is Dirt and Unstable, the Modernized Manufacturing Infrastructure such as the Apartment Factory Facility is Necessary. Forth, as the Micro-sized Firms which have the Intangible Asset such as Patent is Few, the Government Policy for Encouraging the Patent Application is strongly Needed. Fifth, Entrepreneurship and Collaboration Mind between Micro-sized Firms are Lacked, so Establishment of the Cooperative Union is required. Finally, the Effort for the Systemic Planning for the Management is lacked, and the Introduction of the Management Innovation is strongly needed. The Limitation and Future Research Direction is also discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.622-627
• /
• 2003

The existing remote control system have some inherent disadvantage of direct control in the limit range. In some special cases, for example, a power apparatus, an unmanned factory, a nuclear factory, a security management system, the tele-operation is needed to control remote robot without limit space. This field is based on the Internet communication. Because the Internet is constructed all over the world. And it is possible that we control remote mobile robot in the long distance. In this paper, we developed a remote control system. This system is divided into two primary parts. These are local site and remote site. There are the moving robot and web server in the remote site and there is the robot control device in local site. The moving robot is moved by two stepper motors and the robot control device consists of SA-1100 micro controller and embedded Linux. And this controller is an embedded system. Public personal computer which is connected the Internet is used for the web server. The web server provides the mobile robot control interface program to the remote controller and captures the image for feedback information. In the whole system, a robot control device is connected with moving robot and web server through the Internet. So the operator can control the moving robot in the distance through the Internet.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.49-58
• /
• 2011

The workloads of facilities and laborers are important for the capacity planning in a factory. They are always referenced whenever a factory develops a new product, increases the production quantity and makes a plan of new investment. There are many measuring methods for estimating the workload effectiveness of facilities and laborers. In this paper, various measuring methods including survey, work sampling, micro-motion study, data gathering from ERP system and simulation, are analyzed for comparing the accuracy of workload. This case study is conducted in a Korean company that produces semiconductor parts like leadframe and packaging substrate.

• Journal of Environmental Science International
• /
• v.14 no.1
• /
• pp.71-80
• /
• 2005

Soil is one of the most fundamental elements as well as with water and air in studies associated with the environment, in addition, it is one of the important environmental mediums that constructs a basis of the bio­logical system and performs various roles of matter circulation. This study was carried out in Seoul, in May 2000 to evaluate variation in the concentration levels and distribution characteristics for PAH compounds in soil. Soil samples were collected from 33 sites covering traffic, factory, incineration and mountain groups and the PAHs were analyzed. The results show a wide dis­tribution range of PAHs concentrations between 14.66 ng/g and 1,219.35 ng/g. The highest concentration levels exist at Sungsu-2 of the factory group (FS-2). Daemo-3 of the Mountain group (MD-3) presents the lowest levels as compared with the other sites. PAH compounds including mutagenic and carcinogenic materials show high concentrations in the traffic and factory groups and a high ratio in the mountain group. Besides, these compounds absorbed with micro particles might be spread out over a wide region associated with particles' movement and diffusion. After principal component analysis of the soil samples, the results indicated that the sources of PAHs in the soil were divided into two groups, pesticides and vehicles.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.582-584
• /
• 2006

This paper describes a monocular PSD-based motion capture sensor to employ with commercial video game systems such as Microsoft's XBOX and Sony's Playstation II. The system compact, low-cost, and only requires a one-time calibration at the factory. The system includes a PSD(Position Sensitive Detector) and active infrared (IR) LED markers that are placed on the object to be tracked. The PSD sensor is placed in the focal plane of a wide-angle lens. The micro-controller calculates the 3D position of the markers using only the measured intensity and 2D position on the PSD. A series of experiments were performed to evaluate the performance of our prototype system. From the experimental results we see that the proposed system's compact size, low-cost, ease of installation, and high frame rates are suitable for high speed motion tracking in games.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.165-166
• /
• 2015

본 논문에서는 식물공장에서 사용할 수 있는 파장별 광원제어가 가능한 조명장치의 설계하고 구현하고자 한다. 식물의 생장에 필수적인 광원의 파장에 따라 생장에 다양한 영향을 미치게 된다. 따라서 본 논문에서는 식물 생장에서 필요한 다양한 파장의 빛을 공급할 수 있는 식물공장용 조명시스텡을 개발한다. 조명시스템은 마이크로 컴퓨터를 이용하여 적, 청, 녹색 3색 LED를 PWM제어하여 광량과 세기를 제어하고, 공급된 광량을 적산하여 조사된 광량을 확인할 수 있도록 구성하였다. 본 조명 시스템은 태양광 이용형 식물공장의 보조광원으로 사용 가능하며, 완전제어형 식물공장에서 사용이 가능하다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.139.1-139
• /
• 2001

Nowadays due to the remarkable advance of power electronics and micro controller, a Brushless AC servomotor which has the characteristics of the high inertia to torque ratio, the high power density, the maintenance free, and so on is being used widely in industrial robots, machine tools, and factory automation. In a conventional DC motor, the polarity commutation is performed of itself by mechanical brush and commutator, but the PM synchronous motor requires an electrical commutation according to the rotor position. Then for the maximum torque production PM synchronous motor has to be equipped with a controller which maintains the optimal phase angle between the stator field and the magnetic field ...

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.80-85
• /
• 2007

High speed cutting is a machining process which cuts materials with the fast movement and rotation of a spindle in a machine tool. High speed cutting leaves a plastically deformed layer on the machined surface. This deformed layer affects in various forms to the surface roughness of machined parts such as the dimensional instability, the micro crack. The surface roughness is called surface integrity which is very important in precision cutting. This paper aims to study on the machined surfaces characteristics of aluminum alloy and brass by AFM(Atomic force microscope) measurement. The objective is contribution to ultra- precision cutting by exhibit foundation data of surface roughness and tool wear when parts are cutting with diamond tool at the factory.

• Journal of Plant Biotechnology
• /
• v.3 no.2
• /
• pp.59-66
• /
• 2001

Photoautotrophic micropropagation systems do not include sugar in the culture media. This characteristic provides advantages to scale up the micropropagation systems comparing photomixotrophic micropropagation systems. A closed, large-scale photoautotrophic micro-propagation for transplant production system has been developed at Chiba University, Japan. New concepts and technologies were adapted to produce high quality transplants at minimum usage of resources, and as scheduled. Newly developed software for production management was used to enhance the efficiency of the transplant production system. Currently, virus-free transplants of sweetpotato (Ipomoea batatas (L.) Lam.) are vegetatively propagated and produced under sterilized conditions in this system. This system can also be used for production of transplants of any other species including horticultural and woody plants with a minimum of modification.