• Advances in nano research
• /
• 제15권5호
• /
• pp.423-439
• /
• 2023

The aim of this paper is to investigate the free vibration behavior of the micro sandwich beam composing of five layers such as functionally graded (FG) porous core, nanocomposite reinforced by carbon nanotubes (CNTs) and piezomagnetic/piezoelectric layers subjected to magneto electrical potential resting on silica aerogel foundation. The effect of foundation has been taken into account using Vlasov model in addition to rigid base assumption. For this purpose, an iterative technique is applied. The material properties of the FG porous core and FG nanocomposite layers are considered to vary throughout the thickness direction of the beams. Based on the Timoshenko beam theory and Hamilton's principle, the governing equations of motion for the micro sandwich beam are obtained. The Navier's type solution is utilized to obtain analytical solutions to simply supported micro sandwich beam. Results are verified with corresponding literatures. In the following, a study is carried out to find the effects of the porosity coefficient, porous distribution, volume fraction of CNT, the thickness of silica aerogel foundation, temperature and moisture, geometric parameters, electric and magnetic potentials on the vibration of the micro sandwich beam. The results are helpful for the design and applications of micro magneto electro mechanical systems.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1784-1792
• /
• 2001

Numerical analysis on a parallel flow heat exchanger(PFHE) is performed using 2 dimensional turbulent porous modeling. This modeling can consider three-dimensional configuration of passage (flat tube with micro-channels), and the stability and accuracy of numerical results are improved. The geometrical parameters(e.g., the position of separators, inlet/outlet, and porosity of passages of a PFHE) are varied in order to examine the flow and thermal characteristics and flow distribution of the single phase multiple passages system. The flow non-uniformities along the paths of the PFHE are observed to evaluate the thermal performance of the heat exchanger. The location of inlet affects the heat transfer, and the location of outlet affects the pressure drop. The porosity with the optimum thermal performance is around 0.53.

• 구강회복응용과학지
• /
• 제37권4호
• /
• pp.217-224
• /
• 2021

목적: 본 연구의 목적은 혼합방법에 따른 여러 캡슐형 광중합글라스아이노머의 공극률을 비교 평가하는 것이다. 연구 재료 및 방법: 캡슐의 종류와 혼합방법을 달리하여 각각 5개의 시편을 제작한다. 광중합글라스아이노머 캡슐로는 Photac Fil Quick Aplicap (PFQ), Fuji II LC CASULE (F2LC)을 사용하였다. 각 캡슐을 rotating 방식인 RotoMix와 shaking 방식인 CM-II로 혼합하였다. 각 시편의 무게와 높이, 반지름을 측정하여 밀도를 구하였다. 그 후 micro-computed tomography (micro-CT)로 스캔하여 시편의 장축을 따라 470개의 단면을 얻은 뒤 3D로 재구성하여 각 시편의 공극률을 측정하였다. 광중합글라스아이노머 캡슐의 종류와 혼합방법이 공극률에 미치는 영향을 평가하기 위하여 이원배치 분산분석(Two-way ANOVA)을 하였으며, 각 그룹에서의 유의성을 검증하기 위하여 95% 유의수준에서 독립표본 t 검정(Independent t-test)을 하였다. 결과: 광중합글라스아이노머 캡슐의 종류와 혼합 방법에 관계없이 모든 시편에 기포가 전반적으로 존재하였으며, 캡슐의 종류와 혼합방법에 따른 공극률에 통계적으로 유의한 차이가 있었다. PFQ보다는 F2LC에서 공극률이 높았으며, Rotomix 보다는 CM-II에서 공극률이 높았다. 결론: 광중합글라스아이노머 캡슐의 사용 시에 광중합글라스아이노머 캡슐의 종류와 혼합방법에 따라 공극률에 유의한 차이가 있었다. 동일한 혼합기계를 사용할 때 PFQ보다는 F2LC에서 공극률이 높으며, 동일한 캡슐을 사용할 때 Rotomix 보다는 CM-II에서 공극률이 높았다. RMGI 캡슐을 혼합할 때 같은 제조회사의 혼합기계를 선택하는 것이 더 적은 공극률을 유발하는 것은 아니므로 적절한 혼합기계의 선택을 하는 것이 중요하다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.33-37
• /
• 2004

Recently, Growing tendency for structure surface to use water repellent agent has increased steadily. But investigation of it's protection and durability property is not sufficient. Therefore, this paper shows the investigation about repellent property and micro structure's change in surface layer of mortar that is applied by water repellent agent. Water repellent property, absorption coefficient, air permeability, porosity and observation of micro construct was investigated according to water repellent agent type. The test results indicated that mortar applied water repellent agent appears tiny absorption coefficient, but air permeability is maintained. The reason is because silane solution is coating at capillary surface of a wall and minute pore structure is changeless.

• 한국주조공학회지
• /
• 제43권6호
• /
• pp.294-301
• /
• 2023

The effects of Cu on feeding and macro-porosity characteristics were investigated in hypo- (A356 and 319) and hypereutectic (391) aluminum-silicon alloys. T-section and Tatur tests showed that the feeding and macro-porosity characteristics were significantly different between the hypo- and hypereutectic alloys. The hole and the pipe in the T-section and the Tatur casting in hypereutectic alloy showed a rough and irregular shape due to the faceted growth of the primary silicon, while the results of the hypoeutectic alloys exhibited a rather smooth surface. However, the addition of Cu did not strongly affect the macro-feeding behavior. It is known that copper segregates and interferes the feeding process in the last stage of solidification, possibly leading to form more amount of micro shrinkage porosity by the addition of Cu. The macro porosity formation mechanism and feeding properties were discussed upon T-section and Tatur tests together with an alloying addition.

• 한국콘텐츠학회논문지
• /
• 제15권3호
• /
• pp.415-426
• /
• 2015

초음파 속도를 이용한 콘크리트의 건전성 및 강도평가는 오랫동안 사용되어 왔으며, 현장조사에서 필수적이다. 콘크리트 내부의 공극률은 내구성 및 강도를 평가할 수 있는 주요인자이며, 초음파 진행에 방해가 되므로 공극률 변화에 따라 초음파 속도변화가 발생한다. 본 연구에서는 기존의 공극률 모델을 이용하여 콘크리트 내부를 통과하는 초음파 속도 모델링을 수행하였으며 실험값과의 비교하였다. 또한 인장 및 압축 재하 시험과 동시에 초음파 속도를 측정하여 재하 하중비를 이용한 모델링을 수행하였다. 압축영역에서는 하중재하비 50% 수준까지 초음파 속도가 약간 증가하였으며, 최대하중에 근접할수록 급격한 속도의 감소가 발생하였다. 인장영역에서는 압축영역과 다르게 초기부터 초음파 속도가 상당히 변화하였다. 제안된 기법은 콘크리트의 건전부 및 압축영역에서는 합리적인 결과를 보이고 있으며 인장영역에서는 미세균열 및 국소적인 골재치합을 고려한 보완이 필요할 것으로 판단된다.

• Imaging Science in Dentistry
• /
• 제50권2호
• /
• pp.161-168
• /
• 2020

Purpose: The aim of this study was to evaluate the influence of voxel size and different post-processing algorithms on the analysis of dental materials using micro-computed tomography (micro-CT). Materials and Methods: Root-end cavities were prepared in extracted maxillary premolars, filled with mineral trioxide aggregate (MTA), Biodentine, and Intermediate Restorative Material (IRM), and scanned using micro-CT. The volume and porosity of materials were evaluated and compared using voxel sizes of 5, 10, and 20 ㎛, as well as different software tools(post-processing algorithms). The CTAn or MeVisLab/Materialise 3-matic software package was used to perform volume and morphological analyses, and the CTAn or MeVisLab/Amira software was used to evaluate porosity. Data were analyzed using 1-way ANOVA and the Tukey test(P<0.05). Results: Using MeVisLab/Materialise 3-matic, a consistent tendency was observed for volume to increase at larger voxel sizes. CTAn showed higher volumes for MTA and IRM at 20 ㎛. Using CTAn, porosity values decreased as voxel size increased, with statistically significant differences for all materials. MeVisLab/Amira showed a difference for MTA and IRM at 5 ㎛, and for Biodentine at 20 ㎛. Significant differences in volume and porosity were observed in all software packages for Biodentine across all voxel sizes. Conclusion: Some differences in volume and porosity were found according to voxel size, image-processing software, and the radiopacity of the material. Consistent protocols are needed for research evaluating dental materials.

• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.597-604
• /
• 2004

본 연구는 실리카퓸을 사용한 고강도 콘크리트의 고온하의 압축강도의 저하 및 공극률 변화를 통하여 강도 감소와 공극구조와의 연관성을 검토하였다. 또한, 실리카퓸 혼입의 유무와 각 가열온도에서의 시멘트 수화물의 탈수에 의한 공극특성의 변화에 관한 기초 데이터를 제공하고자 하였다. 연구결과, 실리카퓸의 혼입에 따른 필러효과 및 물-결합재비의 차로 인해 공극률 및 공극분포는 다르게 나타났다. 가열온도가 상승함에 따라 공극률도 점진적으로 증가하는 경향을 보였다. 또한, $600^{\circ}C$ 이상의 고온에서의 경향성은 더욱 현저하였다. 가열온도의 상승에 따라 $0.1{\~}0.5{\mu}m$공극의 증가는 현저하였으며 이는 모세관 공극의 수분의 증발 및 C-S-H계 수화물 및 수산화칼슘이 분해되어 결합수가 탈수한 결과이다. 고열에 의한 신축도 콘크리트 내부의 미세균열을 발생시켜 공극률 증가를 유발한다. 이러한 공극률 증가는 가열온도에 따라 일정한 경향성을 띠므로 화해를 입은 콘크리트의 수열온도 및 국부적인 성능저하를 예측할 수 있을 것으로 기대된다.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제2권4호
• /
• pp.197-206
• /
• 2015

This paper presents three-dimensional finite element method analyses of the distribution of equivalents stress of Von Mises. Induced around a cavity located in the bone cement polymethylmethacrylate (PMMA). The presences and effect of its position in the cement was demonstrated, thus on the stress level and distribution. The porosity interaction depending on their positions, and their orientations on the interdistances their mechanical behaviour of bone cement effects were analysed. The obtained results show that micro-porosity located in the proximal and distal zone of the prosthesis is subject to higher stress field. We show that the breaking strain of the cement is largely taken when the cement, containing the porosities very close adjacent to each other.

• Advances in nano research
• /
• 제8권4호
• /
• pp.283-292
• /
• 2020

In the present research, differential quadrature (DQ) method has been utilized for investigating free vibrations of porous functionally graded (FG) micro/nano beams in thermal environments. The exact location of neutral axis in FG material has been assumed where the material properties are described via porosity-dependent power-law functions. A scale factor related to couple stresses has been employed for describing size effect. The formulation of scale-dependent beam has been presented based upon a refined beam theory needless of shear correction factors. The governing equations and the associated boundary conditions have been established via Hamilton's rule and then they are solved implementing DQ method. Several graphs are provided which emphasis on the role of porosity dispersion type, porosity volume, temperature variation, scale factor and FG material index on free vibrational behavior of small scale beams.