• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.322-323
• /
• 2012

This study discussed the formation of phosphate conversion coatings on AZ31 Mg alloy (AZ31) from the zinc phosphating bath with various concentrations of sodium fluoride (NaF). The effects of NaF on the formation, structure, composition and electrochemical behavior of the phosphate coatings were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD) weight balances, open circuit potential (OCP) transients, potentiodynamic polarization curves and immersion test. The coatings were composed of two layers: an outer $Zn_2(PO_4)_3.4H_2O$ (hopeite) crystal layer and an inner amorphous of $MgZn_2(PO_4)_2$. NaF concentration is emphasized to be highly effective in the formation of the hopeite crystal and etching and coating rates. Potentiodynamic polarization and immersion test showed that the coatings formed in the zinc phosphating bath with addition of NaF have much higher corrosion resistance than bare AZ31.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.322-335
• /
• 2003

Nutrient fluxes and sediment oxygen demands (SOD) were measured with intact sediment cores collected from three stations in the downstream of Nagdong River. The sediments were subjected to controlled oxic and hypoxic conditions and temperature gradients (from $10^{\circ}C$ to $30^{\circ}C$) of the overlying waters in laboratory batch system. The effect of temperature and labile layer thickness of the sediment on SOD were examined. $PO_4\;^{3-}$ and $NH_4\;^+$ fluxes were elevated above $20^{\circ}C$ and large mobilities were observed when they were coupled with a hypoxic and high-temperature condition. In the well oxygenated conditions, $PO_4\;^{3-}$ fluxes were negative or negligible but $NH_4\;^+$ fluxes ranged from 1.3 mg N $m^{-2}\;hr^{-1}$ to 2.3 $m^{-2}\;hr^{-1}$. Temperature quotients($Q_{10}$) of $PO_4\;^{3-}$ fluxes were 3.7 ${\sim}$ 7.3 ranges to have the most high values. $PO_4\;^{3-}$ and $NH_4\;^+$ fluxes had the logarithmic increase with temperature, while $NO_3\;^-$ was negatively absorbed to the sediment and linearly correlated with the temperature. $SiO_2$ fluxes showed no difference among oxic and hypoxic conditions and sediment texture. The nutrient fluxes would be closely correlated with pore water chemistry of sediments and activated by the top sediment layer composition such as labile organic matters or algal detritus. The ecological implications of the nutrient fluxes were discussed in terms of sources and sinks of nutrients coupled to algal productions in the Nagdong River.

• Korean Journal of Poultry Science
• /
• v.36 no.4
• /
• pp.337-342
• /
• 2009

This work was conducted to investigate the manure excreta and chemical compositions of layers. Two hundred 1-d-old ISA Brown layers were used in this work, and ten of 200 layers were selected for measurement of manure excreta with feeding phase. Means of the manure excreta per bird, the moisture content of poultry, and the dried manure were $124.7\;{\pm}\;27.5\;g$/bird/day, $76.9\;{\pm}\;1.9%$, and $29.1\;{\pm}\;3.9\;g$/bird/day, respectively. N, $P_2O_5$, and $K_2O$ of manure (55 weeks) were $1.39\;{\pm}\;0.139$, $0.62\;{\pm}\;0.11$ and $0.68\;{\pm}\;0.09%$, respectively. pH, $BOD_5$, $COD_{Mn}$, and suspended solids (SS) were $8.19\;{\pm}\;0.71$, $50,266\;{\pm}\;621\;mg/L$, $62,832\;{\pm}\;803\;mg/L$, and $121,725\;{\pm}\;16,165\;mg/L$, respectively. Heavy metal contents in the manure were $0.003\;{\pm}\;0.0013\;ppm$ for Hg and $0.008\;{\pm}\;0.0012\;ppm$ for Pb, the latter of which was highly low compared with the standard (150 ppm), but no Cd was detected. The results of this work show the average excretion amounts and chemical compositions of layer's manure, which is used as an organic fertilizer.

• Journal of Information Display
• /
• v.1 no.1
• /
• pp.32-34
• /
• 2000

A new PDP cell structure called CSP(Charge Storage Pad) improves the luminous efficiency by 1.6 times and prevents cross talk between adjacent cells. The CSP, which is a conducting material, is inserted between the dielectric layer and the MgO film in the front plate. This CSP produces a longer time-averaged discharge path to get a high luminous efficiency and confines the discharge to prevent cross talk.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.196-202
• /
• 1998

Recently, developments in the frontier industry have brought a rapid increase in the use of brittle materials such as silicon wafer, ferrite, sintered carbide, MgO single crystal and die steel. Because of high hardness and brittleness the cracking and chipping are apt to generate in the grinding of brittle materials, but have replaced gradually the high precision grinding. In this study, the optimum system of in-process electrolytic dressing controlled by computer was developed for improving the defects, and could maintain the optimum dressing condition at all times. The control of in-process dressing was simplified using this system, was able to maintain a stable dressing current and was unrelated to the change of dressing condition according to the variation of gap and oxide layer. Therefore, the optimum in-process electrolytic dressing system was constructed and the analysis of grinding mechanism with this system was studied.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.2
• /
• pp.248-252
• /
• 2005

Synthetic layered double hydroxides (LDHs), [$Mg_4Al_2(OH)_{12}]CO_3{\cdot}nH_2O$, were prepared in the submicron size of plate-like polycrystals. Anion-exchange reactions with various linear dicarboxylic acids were performed to produce LDH/organic hybrid materials by solvothermal treatment in toluene. X-ray powder diffraction spectra for the products indicated that the interlayer spacings of LDHs remarkably changed, up to 20 $\AA$ when 1,10-decanedicarboxylic acid anions were intercalated as an organic guest. Dicarboxylates-LDHs samples could be also re-exchanged consecutively with other dicarboxylic acids or carbonate without serious destruction of layer structure under the scanning electron microscopic observation.

• Toxicological Research
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2001

To evaluate the skin toxicity oj topical toluene application, toluene (35 mg/$cm^2$) was sequentially applied to the portion rat skin for five days. The topical toluene application resulted in increased xanthine oxidase activity and CYP content, and significantly decreased superoxide dismutase and glutathione peroxidase activities at five days in rat skin. Especially catalase activity was remarkably decreased in toluene-applied rat skin. And benzylalcohol dehydrogenase activity showed also a significant decrease in toluene-applied skin. On the other hand, histopathological ultrastructural examination revealed disrupted epidermal basement membrane, rared intercellular adhensions and degenerated keratin layer due to topical toluene application. Increased deposit of cerrous perhydroxide resulted from reaction with $H_2O_2$was abserved in toluene-treated animals. These results indicate that oxygen free radical may be responsible for ultrastructural changes in skin tissue by toluene application to rat skin.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.204-206
• /
• 2005

Although intensive experiments have been performed to investigate the origin of boundary image sticking, one of major factors to determine display quality in AC PDP, it has not being reported clearly why it is occurred. The relationships between boundary image sticking and its possible origins such as phosphor degradation, temporal change of MgO layer, wall charge have been discussed. In this paper, we have analyzed characteristics of the boundary image sticking more clearly by the influence of local panel temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.199-202
• /
• 2002

In general, the background light produced during the reset period deteriorates the dark room contrast ratio in AC PDP. In this paper, we propose a modified ramp reset pulse that can reduce the background light to imperceptible level. In the new reset waveform, the discharges between the scan and sustain electrodes are minimized by applying a positive bias voltage to the sustain electrode and only the weak discharges between the scan and address electrodes occur during the reset period. We adopted a MgO coated phosphor layer to get the same level of voltage margin in the new reset pulse scheme compared to that of the conventional ramp reset pulse one. As a result, the voltage margin is maintained at the same level and the dark room contrast ratio is improved dramatically.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.228-233
• /
• 2001

This paper presents the optimized design, fabrication and thermal characteristics of micro-heaters for thermal MEMS (micro elelctro mechanical system) applications usign SOI (Si-on-insulator) and trench structures. The micro-heater is based on a thermal measurement principle and contains for thermal isolation regions a 10㎛ thick Si membrane with oxide-filled trenches in the SOI membrane rim. The micro-heater was fabricated with Pt-RTD (resistance thermometer device) on the same substrate by suing MgO as medium layer. The thermal characteristics of the micro-heater wit the SOI membrane is 280$\^{C}$ at input power 0.9W; for the SOI membrane with 10 trenches, it is 580$\^{C}$ due to reduction of the external thermal loss. Therefore, the micro-heater with trenches in SOI membrane rim provides a powerful and versatile alternative technology for improving the performance of micro-thermal sensors and actuators.